What is the temperature inside the car when the outside temperature is 30 degrees?

What are the differences between the Buick Excelle and Verano?

The differences between the Buick Excelle and Verano are: 1. Different models: The Buick Excelle has a sedan version; the Verano has both hatchback and sedan versions. 2. Different body dimensions: The Buick Excelle measures 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm; the Verano measures 4723mm in length, 1802mm in width, and 1466mm in height, with a wheelbase of 2700mm. 3. Different engines: The Buick Excelle is equipped with a 1.5L naturally aspirated engine and a 1.3T turbocharged engine; the Verano is equipped with a 1.0T turbocharged engine and a 1.3T turbocharged engine.

112

Share

What are the differences between the Boyue Wisdom and Supreme models?

Configuration differences: The main difference between the Geely Boyue Wisdom and Supreme models lies in their configurations. The Supreme model offers significantly more features than the Wisdom model, including lane departure warning system, lane keeping assist system, road traffic sign recognition, front/rear head airbags (curtain), power tailgate, power tailgate position memory, ambient interior lighting, and power-folding mirrors. Boyue exterior introduction: The Geely Boyue features a larger family-style ripple grille at the front, with a more pronounced pentagon shape. The hood has raised sections at both ends of the grille, along with two central "character lines," giving it a stronger sense of power compared to the current model. The headlight assembly is slightly smaller in size and features a new full-LED headlight design.

117

Share

Is it normal for the Volkswagen Touran to shake at idle but run normally?

It is not normal for the Volkswagen Touran to shake at idle. Reasons for idle shaking: Dirty throttle body or excessive carbon buildup in the fuel injectors, engine misfire, and inconsistent air-fuel mixture in the engine can cause shaking after a cold start. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will affect whether the cold start proceeds smoothly. Idle handling: The engine idle speed is preset in the car's computer, which automatically adjusts when the RPM drops below a certain range. If the idle speed is too low and causes shaking, it means it has exceeded the computer's control range. Some cars have an adjustment screw on the throttle body to regulate idle speed, while others do not. For such cars, you can check the idle control valve, throttle body, air flow meter, vacuum sensor, and adjust the ignition timing (for cars with distributors) to increase the idle speed. Low coolant temperature can also cause low idle speed, so check and replace the thermostat if necessary. Solutions: Install an air filter, replace spark plugs, and clean carbon deposits and oil sludge.

105

Share

Why is the Audi gear indicator light not working?

Audi gear display light not working is mainly caused by gear switch failure. If the gear light does not illuminate, it may result in inability to shift gears, gear confusion, and other situations, leading to significant driving jerks and affecting driving comfort. Gear switch electronic failure: Driving an automatic transmission vehicle using only Park (P), Reverse (R), Neutral (N), and Drive (D) gears can fully meet the needs of general driving. However, in some special driving environments, other functional gears may be required. Therefore, if the correct control method is selected, an automatic transmission vehicle can perform better than a manual transmission. If the automatic gear display is abnormal, check whether the gear switch has a short circuit or open circuit, or if it has ever been exposed to water. You can connect a computer to diagnose whether it is an electronic failure of the gear switch or an electrical failure of the instrument display. Replace the damaged parts and test the vehicle. Gear confusion: Automatic transmission gears display P, R, N, D, S, and L, representing Park, Reverse, Neutral, Drive, Sport mode, and Low gear, respectively. A damaged gear switch cannot correctly display the gear indicators. In severe cases, it may cause gear shifting confusion, inability to shift gears, resulting in insufficient vehicle power and affecting the transmission's service life.

108

Share

What to do if the old driver's license cannot be found when renewing it?

You can apply for renewal due to expiration or loss. When applying, bring your original ID card and go to the nearest vehicle management office. After renewing the driver's license, the vehicle management office will take back the old license, which will be invalid and cannot be used. According to Article 57 of the Ministry of Public Security Order No. 139, motor vehicle drivers should apply for renewal at the vehicle management office where the driver's license was issued or at another vehicle management office within 90 days before the expiration of the driver's license. When applying for renewal, you need to fill out an application form and submit the following certificates and documents: 1. Certificate 1: The identity proof of the motor vehicle driver. 2. Certificate 2: The motor vehicle driver's license. 3. Certificate 3: A medical certificate issued by a county-level or higher medical institution or a military regiment-level or higher medical institution regarding physical conditions.

103

Share

What transmission is used in the Hyundai ix35?

"The transmission brand used in the Hyundai ix35 is Powertech. Hyundai owns two transmission brands: Powertech (POWERTECH) and Dymos (DYMOS). Powertech mainly produces AT and CVT transmissions, while Dymos primarily manufactures DCT transmissions and manual transmissions. Powertech is the third company, after ZF and Aisin, capable of producing a mature 8AT transmission, which speaks volumes about its capabilities. The Hyundai ix35 is equipped with Powertech's 6-speed automatic transmission with manual shift mode. The manual shift mode essentially adds manual shifting functionality to a traditional AT or CVT transmission. The purpose of this feature is to enhance the driving pleasure of automatic transmission vehicles. When using the Hyundai ix35's transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged neglect of fluid changes can damage internal components such as bearings and the transmission housing. Avoid prolonged coasting in neutral. While many experienced drivers coast in neutral with manual transmission vehicles, doing so with an automatic transmission can cause overheating and create a noticeable shock when shifting back to D (Drive) mode. Never shift into D (Drive) or R (Reverse) before the vehicle comes to a complete stop. Some drivers attempt to demonstrate smooth operation by shifting into reverse while still moving forward, but this practice severely damages transmission gears and may eventually lead to gear grinding or other failures. Avoid frequent steep hill climbs in D (Drive) mode. Automatic transmission vehicles often overheat under high load or may upshift too early, resulting in insufficient power for climbing. In such situations, use manual mode to maintain lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported on a flatbed tow truck with the transmission in N (Neutral). Never use tow ropes or directly tow the vehicle with another vehicle."

102

Share