···
Log in / Register

What is the symbol for fog lights on a car?

6Answers
KinsleyAnn
08/30/2025, 01:44:56 AM

Fog lights have wavy lines, similar to modern light bulbs, with the light facing downward, forward, and backward. The following are the conditions for turning on fog lights: When visibility is between 100-200m: You must turn on fog lights, low beams, width indicators, and taillights, and the speed must not exceed 60km/h, keeping a distance of more than 100m from the vehicle in front. When visibility is between 50-100m: Turn on fog lights, low beams, width indicators, and taillights, and the speed must not exceed 40km/h, maintaining a distance of more than 50m from the vehicle in front. Additionally, improper use of fog lights will result in a fine and a deduction of 1 point. Under good visibility conditions, the use of fog lights is strictly prohibited. This is because the red light from fog lights can cause real harm to human eyes when directly shone into them without the attenuation from obstacles like fog, rain, or snow.

Was this review help?
116
Share
LeElizabeth
09/11/2025, 10:52:39 PM

I've been working at the dealership for several years, and a common issue is the fog light symbols, which many people get wrong. The front fog light icon looks like a small bulb with wavy lines bending downward, resembling light shining into fog. It's usually located on the left side of the dashboard or near the steering wheel. The rear fog light icon is similar but has an additional backward-pointing arrow, indicating illumination toward the rear. Never turn them on randomly—using them in foggy conditions improves road visibility and safety. If you leave them on in clear weather, other drivers might flash their lights at you, and it also drains the battery. I've had customers with faded symbols, so it's crucial to check the switch or bulb immediately. In short, memorize the symbols, perform regular checks, and don't wait for an accident to regret it.

Was this review help?
6
Share
Expand All
CarlosMarie
10/25/2025, 11:41:11 PM

I've been driving for over ten years, and the fog light symbol is the most easily overlooked by beginners. The front fog light symbol is a lamp with downward curves, while the rear fog light adds a backward arrow, usually located on the control panel. Once when driving in fog, turning it on gave me clear visibility and helped avoid an accident. Normally, don’t leave it on unnecessarily—it can dazzle drivers behind you. Remember, fog lights are useful in rainy or thick fog conditions—safety first. If the symbol doesn’t light up, it might be a blown fuse or wiring issue, so get it checked. Small details in a car can make a big difference.

Was this review help?
5
Share
Expand All
ErinRose
12/08/2025, 11:01:13 PM

Fog light symbol simple identification: The front fog light looks like a bulb with wavy lines pointing downward, while the rear fog light is similar but includes a backward element. The switch is usually located near the dashboard, and when turned on, the indicator light will illuminate in the designated area. It is specifically designed for low visibility conditions, such as heavy fog or rainstorms. Avoid misuse, as it may disturb others. Ensure the symbol is clear, and seek maintenance if any issues arise.

Was this review help?
12
Share
Expand All
LaKayden
01/29/2026, 12:10:01 AM

I believe fog light symbols are crucial for driving safety. The front fog light icon features a lamp shape with downward curving waves, while the rear fog light adds a backward arrow. These are installed on the control panel for easy operation. Turning them on in poor weather conditions can illuminate the road better and reduce collision risks. I emphasize using them only when necessary to avoid distractions or violations. If the symbols malfunction, don't delay inspection to prevent potential hazards. Safe driving requires understanding these indicators.

Was this review help?
12
Share
Expand All
OElizabeth
04/24/2026, 04:41:10 AM

When I first learned to drive, I was curious about the fog light symbol. The instructor pointed out that it looks like a bulb with wavy lines pointing downward. That's the front fog light, while the rear fog light has an arrow pointing backward, usually located near the headlight switch. That time on the highway in foggy weather, turning it on made the world much clearer. Remember not to touch the symbol carelessly, operate the switch gently, and don't fiddle with it on sunny days. Safety comes first—this knowledge is simple yet practical.

Was this review help?
14
Share
Expand All
More Q&A

What Causes Unstable Idle Speed Fluctuations During Cold Start?

Unstable idle speed fluctuations during cold start are primarily caused by excessive carbon buildup in the throttle body and intake passages. Below are the relevant explanations: 1. Intake manifold or valve leaks: Incorrect engine air intake can result in overly rich or lean air-fuel mixture, leading to abnormal combustion. This causes engine idle fluctuations. When leaks affect engine vacuum, severe vibrations occur, particularly impacting cold idle. Common causes include aged intake manifold gaskets causing leaks or damaged intake manifolds. 2. Excessive carbon deposits in throttle body and intake passages: Carbon buildup and dirt accumulation in the throttle body and surrounding intake passages alter the air channel cross-sectional area, preventing the control unit from precisely regulating idle air intake. This results in improper combustion due to overly rich or lean mixtures. Common causes include throttle body carbon deposits and oil contamination/carbon buildup in surrounding intake passages.
106
Share

Do I need to collect the inspection sticker during the biennial vehicle inspection?

During the biennial vehicle inspection, you do need to collect the inspection sticker. Here are the specific details: 1. Exemption: New vehicles enjoy a 6-year exemption from physical inspection, but the annual inspection sticker must be renewed every two years. The exemption only means the vehicle doesn't need to go to an inspection station. Nowadays, you can obtain the biennial inspection sticker without leaving your home, simply by using your smartphone. 2. Vehicle inspection notes: Please note that for small and micro non-commercial passenger vehicles, within 6 years, inspection is required every 2 years; after 6 years, annual inspection is required; after 15 years, inspection is required twice a year. For commercial passenger vehicles, within 5 years, annual inspection is required; after 5 years, inspection is required every 6 months. For trucks and large/medium-sized non-commercial passenger vehicles, within 10 years, annual inspection is required; after 10 years, inspection is required every 6 months.
101
Share

Can a New Car Go Directly on the Highway?

A new car can go directly on the highway. Here are the specific details: 1. Try to avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: If a new car is fully loaded during the break-in period, it can cause damage to the components. Therefore, within the first 1,000 kilometers, the load should generally not exceed 75%-80% of the rated capacity. 3. Driving on the highway: During the break-in period, driving long distances on the highway increases the continuous working time of the engine, which can lead to component wear. It is recommended to maintain a speed of 120 km/h with the engine speed not exceeding 3,000 RPM. If the speed exceeds 3,000 RPM, consider reducing the speed to keep it at 3,000 RPM. During long-distance driving, take a break of about ten minutes at service areas.
109
Share

How to enable the sound when locking the 2021 Classic Sylphy?

To enable the horn sound when locking the 2021 Classic Sylphy, simultaneously press the unlock and lock buttons on the remote key for 3 seconds. The horn sound will be successfully set once the lights flash. Below are the specific details about the Sylphy: 1. The Sylphy is a compact car under Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. 2. The Sylphy is equipped with a 1.6L naturally aspirated engine across all models. The 2019 Sylphy offers 4 variants, featuring 1.6L displacement, with options for manual or continuously variable transmission (CVT). The engine delivers a maximum power of 93.0kW, maximum horsepower of 126PS, and maximum torque of 168.0N·m. 3. In terms of suspension, the Sylphy features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
111
Share

How to Solve the Problem of Skoda Octavia Brake Light Staying On?

Skoda Octavia brake light staying on solutions: 1. If the brake light stays on, brake fluid should be added. 2. It could be that the tail light bulb is damaged, and replacing the bulb will solve the problem. 3. If the brake pads are severely worn, the light may also stay on, and the brake pads need to be replaced. Below is relevant information about the brake light: 1. Lack of brake fluid, which is an essential part of the car's braking system. When the driver steps on the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. 2. Tail light bulb damage. The brake fluid reservoir has upper and lower lines. When the brake fluid level falls below the lower line, the sensor next to the reservoir detects this and reflects it on the dashboard. If the brake fluid decreases rapidly, it indicates a leak in the braking system.
120
Share

What Causes the Oil Pump to Fail?

The following are the reasons for oil pump damage: 1. Wear between the plunger and plunger sleeve: During operation, mechanical impurities in the fuel enter the injection pump chamber, causing abrasive wear. Combined with the corrosive effect of the fuel, this increases the gap between the plunger and sleeve. 2. Wear of the delivery valve: High-speed flow scouring by mechanical impurities in the fuel causes wear on the delivery valve, pressure relief band, or valve seat, leading to poor sealing and insufficient residual pressure in the high-pressure fuel line. Additional information on the causes of damage: 1. Failure of the delivery valve spring: Fatigue reduces the spring force of the delivery valve, impairing its one-way shut-off function and causing backflow. 2. Insufficient pressure in the low-pressure fuel line: Reduced or no pumping capability of the fuel supply pump, clogged diesel filters or fuel lines, or air entering the fuel system can decrease the fuel pressure in the low-pressure line of the injection pump, preventing pressure generation. When the injection pump operates, fuel cannot quickly enter the pump chamber, resulting in no or insufficient fuel injection.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.