···
Log in / Register

What is the SRS malfunction in BYD?

6Answers
DelBlakely
08/27/2025, 12:52:40 AM

SRS refers to the airbag system. If the warning light is on, it indicates a malfunction in the airbag or seatbelt pretensioner system. Although this issue does not affect driving, in the event of an accident, the airbag may fail to deploy, providing no protection. Therefore, when the airbag warning light on the dashboard illuminates, it is recommended to promptly visit a 4S dealership for professional inspection and repair. Below are relevant details: SRS Airbag: The electronic airbag system is a passive safety protection system (refer to vehicle safety performance) that works in conjunction with seatbelts to provide effective collision protection for occupants. In a collision, car airbags can reduce head injuries by 25% and facial injuries by approximately 80%. Function: The airbag system is an auxiliary protective device made of special fabric nylon with a rubber lining, filled with harmless helium gas during operation. In a collision, the airbag inflates in about 0.03 seconds. This rapid inflation ensures that the airbag is in place in time when the passenger's body is restrained by the seatbelt while the head continues to move forward.

Was this review help?
103
Share
DelNevaeh
09/08/2025, 11:53:21 PM

When the SRS light comes on while driving a BYD, I suspect it's a problem with the airbag system. The most common issue is a faulty sensor, such as a misaligned or dust-clogged crash sensor causing false alarms. It could also be due to aging or short-circuited wiring, loose or corroded connectors leading to signal interruptions. Another possibility is a problem with the airbag module itself, like an overheated or malfunctioning computer control unit or a software error triggering the warning. Sometimes, low or unstable battery voltage can also cause the system to falsely report a fault. Airbags are life-saving devices and should not be ignored! If the light comes on, it's best to visit a 4S shop or authorized repair center as soon as possible for a professional inspection to prevent protection failure in case of an accident. I've seen a friend's car turn a small oversight into a big problem, so don't procrastinate—safety comes first.

Was this review help?
15
Share
Expand All
StMiles
10/23/2025, 12:42:21 AM

As a BYD owner, I was quite anxious when the SRS warning light came on. This is mostly a safety-related issue, simply put, the system self-check failed. Possible causes include a faulty weight sensor under the seat mistakenly thinking no one is seated, or worn wiring in the steering wheel airbag causing poor contact. Additionally, the light shouldn't stay on too long after starting the car; if it remains lit, it indicates a serious problem. I suggest everyone avoid tampering with airbag components and refrain from DIY repairs that might worsen the situation. Instead, drive directly to a professional shop to check diagnostic codes. Technicians can use computers to pinpoint the exact fault, such as whether a relay has blown or the control board is burnt. When washing the car, be careful not to get water into the connectors to reduce the risk of water damage affecting longevity. Early diagnosis brings peace of mind!

Was this review help?
10
Share
Expand All
OJason
12/06/2025, 12:05:49 AM

The BYD SRS warning light is on, which means the airbag may not function. Key causes include broken sensor wiring, damaged airbag control unit, or voltage issues triggering false alarms. The system is highly sensitive and alerts you at the slightest abnormality for protection. If it fails to deploy in a collision, personal risk increases significantly. I recommend stopping immediately and seeking professional repair—don’t push through driving to avoid regret in case of danger. Addressing this fault promptly is crucial!

Was this review help?
20
Share
Expand All
Terri
01/26/2026, 01:25:09 AM

I often think about car issues, and the SRS light coming on in a BYD is a warning sign. The Supplemental Restraint System relies on multiple components, such as front collision sensors malfunctioning and causing the light to trigger falsely. Or, the airbag itself may age or the module firmware could have errors, triggering fault codes. It could also be due to insufficient battery voltage causing the system to fail during self-check. These are all fundamental safety safeguards. I remind my friends to check related circuit connections during regular maintenance to avoid aging or broken wiring harnesses. Don’t wait until the light comes on to panic and deal with it—developing the habit of prevention is crucial.

Was this review help?
13
Share
Expand All
ManuelMarie
04/21/2026, 11:53:39 PM

When encountering a BYD SRS alarm, I usually stay calm and analyze the possible causes first. Common issues with the airbag system include short circuits due to corroded wiring or rusted connector pins affecting signal transmission, or misaligned sensors causing false alarms from significant deviations during bumps. Additionally, improper system upgrades or modifications like audio system installations that accidentally disturb wiring can disrupt it. It's advisable to ensure the warning light turns off before driving after starting the car; otherwise, seek repairs immediately. Avoid parking in damp environments for extended periods to reduce risks. Regular comprehensive inspections and maintenance at authorized service centers help prevent potential hazards, ensuring the safety and reliability of this critical safety system.

Was this review help?
2
Share
Expand All
More Q&A

What to Do If the Car Is Not Driven for a Period of Time?

Methods for dealing with a car that hasn't been driven for a while: 1. Warm up the car every week and drive for about 15 minutes to ensure lubrication of moving parts and the formation of protective oil films, while also replenishing the battery's charge appropriately; 2. Check the battery every month to see if there are signs of power loss. If signs of power loss appear, the engine can be used to charge the battery appropriately; 3. If you're going on a long trip, you can entrust the car to relatives or friends to take care of it in this manner. Hazards of not driving the car for a long time: 1. If the car is not driven, it will experience severe power loss after 3 months and won't be able to start; 2. If the car is parked for too long, the engine will lose the protection of the lubricating oil film, leading to oxidation and corrosion, which can reduce engine power and shorten its lifespan.
102
Share

How many cylinders does the 2019 Sagitar engine have?

2019 Sagitar is equipped with a four-cylinder engine. This model comes with two engine options: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine, both of which are four-cylinder. The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 175 Nm. This engine can output its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,500 to 4,500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm. It can output its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,750 to 3,000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. In terms of configuration, the entire lineup comes standard with an electronic parking system. Higher-end models offer a 10-color ambient lighting system that can switch between economy, comfort, and sport modes. For active safety, the top and sub-top trims are equipped with an advanced pre-collision system, with optional lane-keeping and blind-spot monitoring features. ACC adaptive cruise control is also available as an option. For interior design, the cabin features a combination of soft-touch materials and piano black panels, supports Apple CarPlay connectivity, and has touch-sensitive air conditioning controls. Mid- and lower-trim models come with traditional mechanical gauge clusters.
110
Share

What engine is used in the new Buick Excelle?

New Excelle models are all equipped with the DOHC16V-Twin-Tec engine, a 1.3-liter 3-cylinder naturally aspirated engine with a maximum horsepower of 107 hp, a maximum power of 70kw, and a maximum torque of 133nm. The DOHC16V-Twin-Tec engine in the new Excelle has been recalibrated to meet Euro IV emission standards and is paired with a newly tuned chassis. Without compromising power output, it achieves a 3% improvement in fuel consumption. The engine features an aluminum alloy cylinder block and employs multi-point electronic fuel injection, contributing to its excellent fuel economy. The all-new Excelle comes standard with a new-generation intelligent start-stop system, which has been optimized for enhanced performance. It uses an enhanced starter motor with a cycle life exceeding 350,000 times, offering 50% better durability than similar products. Additionally, the new Excelle is equipped with an AF20 automatic transmission featuring advanced intelligent neutral switching function, ensuring smooth gear shifts while being more environmentally friendly. The Bosch 5.3 ABS anti-lock braking system and EBD electronic brake-force distribution system enhance braking stability and safety.
120
Share

Where is the car fender located?

Car fenders are located above the tires, between the doors, hood, and bumper. Here is some relevant information about car fenders: 1. Introduction: Fenders, also known as wings, are the outer body panels that cover the wheels. They are divided into front fenders and rear fenders based on their installation positions. 2. Function: The design of fenders utilizes fluid dynamics to reduce the drag coefficient, making the car drive more smoothly. The front fenders are installed at the front wheels. Since the front wheels have steering functions, they must ensure the maximum space for wheel turning. Therefore, designers use "wheel travel diagrams" to verify the dimensions of the fenders based on the selected tire model and size. Rear fenders do not have the issue of wheel turning interference, but for aerodynamic considerations, they are slightly arched and protrude outward.
111
Share

What are the requirements for obtaining a Shenzhen license plate when purchasing a car?

Requirements for obtaining a Shenzhen license plate when purchasing a car: residence in the city; possession of a valid motor vehicle driver's license for vehicle types C or above; no small passenger cars registered in the city under the applicant's name; no valid indicators held under the applicant's name. Below is relevant information about license plates: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. They are typically made of aluminum, iron, plastic, or paper, displaying the vehicle's registration number, registration area, or other relevant information. 2. Function: License plates serve as identification and information registration for vehicles. Their main purpose is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the plate number.
113
Share

What are the differences between the Corolla 1.2 and 1.5?

The differences between the Corolla 1.2 and 1.5 are as follows: 1. Different engines: The 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology, offering better fuel efficiency, environmental friendliness, and more powerful performance compared to naturally aspirated engines. The 1.2T is a turbocharged, direct-injection engine. Turbocharging is an advanced technology, providing better fuel efficiency, environmental friendliness, and more powerful performance compared to naturally aspirated engines. 2. Different fuel consumption and maintenance costs: Taking A-segment cars as an example, both the 1.2T Corolla and the 1.5 Mazda3 (Axela) have a fuel consumption of just over 7L per 100 kilometers. Over 10,000 kilometers, this translates to only about three to four hundred yuan, which is not a decisive factor when purchasing a car. In terms of maintenance costs, there is little difference between a three-cylinder engine and a standard four-cylinder engine. The main difference lies in the spark plugs—the three-cylinder engine has one fewer than the four-cylinder, saving roughly over one hundred yuan. The replacement cycles for other parts are basically the same for both three-cylinder and four-cylinder engines. Additionally, don't assume that naturally aspirated engines are cheaper just because the technology is mature. High-quality naturally aspirated engines also require expensive engine oil.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.