···
Log in / Register

What is the solution for the raised edge of the brake disc?

1Answers
AugustRose
07/29/2025, 10:07:48 AM

The solution for the raised edge of the brake disc: Simply replace it with a new brake disc. The braking system is crucial for a vehicle as it directly affects driving safety and stability. A car's braking system mainly consists of brake pads, brake discs, brake linings, vacuum booster, master brake cylinder, and wheel brake cylinders. When the driver presses the brake pedal, the vacuum booster provides assistance, making it easier to depress the pedal. Upon pressing, the master brake cylinder pushes brake fluid to the wheel brake cylinders, which then press the brake pads against the brake disc. Based on the energy source, braking systems can also be categorized into manual braking systems, power braking systems, and servo braking systems.

Was this review help?
103
Share
More Q&A

What are the reasons for black smoke coming from a car?

Black smoke coming from a car can be caused by: 1. Clogged air filter; 2. Excessive fuel system pressure; 3. Air leakage; 4. Reduced vacuum; 5. Insufficient ignition system energy; 6. Poor valve sealing, internal leakage; 7. Excessive clearance between cylinder liner and piston; 8. Incorrect ignition timing, some engine cylinders not working; 9. Faulty oxygen sensor, air flow meter, fuel pressure regulator, intake pressure sensor, or coolant temperature sensor; 10. Damaged cold start injector or ECU computer program; 11. Damaged throttle position sensor or its circuit.
113
Share

How to distinguish the front and back of car tires?

The method to distinguish the front and back of car tires is: differentiate through the markings on the tire sidewall. The side marked 'inside' indicates the inner side, while 'outwards' indicates the outer side. Effects of installing tires incorrectly: 1. Reduced grip, leading to inconsistent resistance on both sides; 2. Decreased braking efficiency, potentially causing the vehicle to veer and unstable steering; 3. Poorer water drainage. Functions of tires: 1. Generate driving force, braking force, and lateral force through interaction with the road surface; 2. Bear the weight of the car; 3. Provide cushioning and shock absorption. The normal tire pressure range is 2.3 to 2.8 bar. In winter, it can be appropriately increased by 0.2 bar, while in summer, it should be reduced by 0.1 bar to prevent blowouts.
104
Share

What are the methods for car tire maintenance?

Methods for car tire maintenance include: 1. Regularly clean out stones stuck in the tire treads; 2. Avoid exposing tires to direct sunlight; 3. Frequently check tire pressure—refer to the normal tire pressure values listed on the inside of the fuel tank cap and adjust accordingly; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Choose smooth roads while driving, avoiding objects that could puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires. The functions of tires are to support the entire weight of the vehicle, transmit traction and braking torque, prevent vibration and damage to car components, and ensure driving safety.
119
Share

What are the common locations for car oil leaks?

Common locations for car oil leaks: 1. Oil filter leakage; 2. Valve cover leakage; 3. Engine timing cover leakage; 4. Engine oil pan leakage; 5. Crankshaft oil seal leakage. Causes of car oil leaks: 1. Fastening nuts not tightened properly or overtightened; 2. Oil pan drain plug not tightened or damaged; 3. Improper oil seal installation with misaligned shaft neck and seal edge; 4. Drain plug gasket not replaced for extended periods; 5. Aging seals on oil cooler or filter base causing poor sealing; 6. Use of low-quality oil filters; 7. Excessive transmission fluid; 8. Poor sealing of oil cooler.
108
Share

What do the numbers and letters on car tires represent?

The numbers and letters on car tires represent the following meanings: 1. Section width: The increased width of the tire and its contact area with the ground enhances grip and improves braking performance; 2. Aspect ratio: The ratio of the tire's section height to its section width; 3. Radial tire and rim diameter: Common tires are denoted by 'R', indicating a radial tire, where the internal cord fabric is arranged at a 90-degree angle to the tire's centerline, resembling the meridians on a globe; 4. Load index: A numerical value representing the maximum load capacity, indicating the maximum weight the tire can bear under normal inflation conditions; 5. Speed rating: The maximum speed at which the tire can carry a specified load under defined conditions.
119
Share

What Are the Specifications of Car Tires?

Car tire specifications include: 155/65R13, 75/70R14, 185/60R15, 205/40R16, 225/45R17, 265/30R19, 255/40R18, 295/30R20. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to car components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy-saving economy.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.