What is the solution for the black screen issue on the Roewe i5 large-screen navigation?

How to manually reset the car malfunction indicator light?

Regardless of the reason causing the engine malfunction light to illuminate, after troubleshooting, it is necessary to use a computer to access the ECU program for resetting. There is no manual method to reset the malfunction light. The reasons for the engine malfunction light to illuminate are as follows: 1. Poor quality gasoline that does not meet standards. This occurs when low-quality gasoline is added at non-standard gas stations, leading to incomplete combustion of the air-fuel mixture during engine operation, which triggers the engine malfunction light. This does not affect driving safety but may cause some degree of damage to the engine. 2. Oxygen sensor failure. Modern cars are equipped with two oxygen sensors, one before and one after the three-way catalytic converter. The front oxygen sensor's function is to detect the air-fuel ratio under different engine operating conditions, while the ECU uses this signal to adjust fuel injection and calculate ignition timing.

113

Share

Why does the car paint change color after washing with self-cleaning detergent?

The reason for the car paint changing color after washing with self-cleaning detergent is that the paint is corroded by the detergent. Self-cleaning detergents have extremely high alkalinity and strong corrosiveness, which can affect the gloss of the car paint surface and even corrode the paint, leading to discoloration. Self-cleaning detergents are mainly used to clean stains on tires and rims. The self-cleaning detergents available on the market have very high alkalinity, falling into the category of caustic soda. Even when diluted to a ratio of 1:100, they remain strongly alkaline and highly corrosive. Using these detergents for car washing often results in damage to the paint, and they can also cause significant harm to both humans and vehicles during the cleaning process. Therefore, self-cleaning detergents can damage car paint and should not be used directly for washing cars; they must be used with caution. Cleaning power does not determine the quality of a cleaner. Cleaning is just one function of a detergent. The key consideration is whether the detergent can ensure that the surface being cleaned is not subjected to secondary damage while cleaning. The correct approach is to choose safe and environmentally professional car washing and detailing products and to avoid using corrosive alkaline cleaners or acidic cleaners containing harmful acids. It is best to repaint and repair the affected areas. Regular maintenance, such as applying a paint protection film, can also effectively shield the paint from damage.

106

Share

What Causes the Front Derailleur Gear of a Bicycle to Fail to Engage?

The front derailleur gear of a bicycle may fail to engage due to dirty or overly thick gear oil; incomplete clutch disengagement; excessive play in the gearshift mechanism; wear of the transmission synchronizer; or jamming of the selector lever lock pin. Symptoms of the issue: Difficulty in shifting gears, where the gearshift lever feels heavy and cannot engage a gear, or when a gear is barely engaged but hard to return to neutral. Misalignment of the control mechanism: Bending or deformation of the gearshift lever and linkage rods, excessive wear at movable joints, etc., leading to incomplete gear engagement. Damage to the shift fork shaft: Bending, corrosion, or burrs on the shift fork shaft; overly stiff locking springs or stuck interlock pins preventing axial movement of the shift fork shaft; loose, bent, deformed, or severely worn shift forks; burrs formed by gear end-face friction, or wear, burring, or damage to the splines of the engagement sleeve. Synchronizer wear: Wear or breakage of the synchronizer cone ring teeth along the axial direction, forming a convex shape; wear or polishing of the friction cone spiral grooves, reducing the gap between the ring end face and gear end face, even to zero, diminishing friction effectiveness and causing synchronizer failure. Improper lubricant selection: Use of inappropriate lubricants, such as those with high viscosity causing the oil film to adhere to the cone ring, leading to synchronizer failure; or high oil temperatures causing the lubricant to gum up, filling the synchronizer cone ring surface and spiral grooves, resulting in synchronizer damage. Loose lock pins: Loose or disassembled lock pins in lock-pin synchronizers; excessive wear of the axial grooves on the splines of sliding-block synchronizers; weak or broken sliding-block spring rings, causing the sliding blocks to slip out of the grooves. Synchronizer assembly issues: Excessive wobble of the synchronizer assembly on the output shaft, or prolonged neutral coasting with the engine off, causing the intermediate shaft to stop working, leading to dry friction and overheating of the output shaft, damaging the synchronizer and causing incomplete clutch disengagement.

118

Share

What does it mean to drive a new car home and let it sit for a while?

When driving a new car home, it should not be left parked for more than three to five days without being driven. New cars have a break-in period. Precautions during the break-in period of a new car: Avoid aggressive driving and do not let the engine run at high RPM for extended periods, as this will increase engine wear. Avoid sudden acceleration, which can instantly increase the load on the engine and transmission, harming both. Do not perform the first maintenance earlier or later than recommended; go to the 4S shop on time for the first maintenance when it is due. Ventilate the new car frequently by opening windows, as the interior may contain odors and harmful substances like formaldehyde. Car owners can purchase bamboo charcoal bags to absorb formaldehyde inside the car. When tinting windows after buying a new car, choose genuine films from reputable brands and have them installed by professional shops. Some performance cars support launch control, but avoid using it during the break-in period to prevent damage to the engine and transmission. Things to check when picking up a new car: The invoice comes in three copies: the invoice itself, the tax payment copy, and the registration copy. All three are essential, and the details on the invoice should be verified. The vehicle documentation package includes the owner’s manual, warranty card, first maintenance card, stamped photos required for license plate registration, and the insurance policy. Carefully inspect the exterior for any paint imperfections, scratches, or dents. Open the doors to check if the gaps are even and if the seals are intact. Examine the interior for any defects or damage. Test all in-car functions, especially the lighting system. Failing to inspect the undercarriage may lead to issues like oil leaks or scrapes.

107

Share

How to Adjust the Total Mileage on the Accord Dashboard?

The method to adjust the total mileage on the Accord dashboard is: 1. Locate the driveshaft in the engine compartment and unplug the sensor connector; 2. Insert the output plug of the mileage adjuster into the sensor plug; 3. Turn the car key and adjust the adjustment button on the mileage adjuster. Taking the 2021 Accord as an example, its body dimensions are: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, and fuel tank capacity 56l. The 2021 Accord is a mid-size car, equipped with a 1.5t turbocharged engine, with a maximum horsepower of 194ps, maximum power of 143kw, maximum torque of 260nm, and matched with a continuously variable transmission.

111

Share

What car brand has a T-shaped logo?

A T-shaped logo represents Tesla vehicles, which include models such as Tesla Model Y, Tesla Model 3, Tesla Model YX, Tesla Model YS, and Tesla Model 3 Import. Taking the 2021 Tesla Model YX as an example, it belongs to the mid-to-large-sized car category with body dimensions of 4979mm in length, 1964mm in width, and 1445mm in height, with a wheelbase of 2960mm. The 2021 Tesla Model YX is equipped with a permanent magnet motor, delivering a maximum horsepower of 538ps, a maximum power of 395kw, and a maximum torque of 755nm, paired with a single-speed fixed gear ratio transmission.

120

Share