···
Log in / Register

What is the safe following distance in urban areas?

1Answers
DelValentina
07/25/2025, 01:14:42 AM

Urban safe following distance is more than 50 meters. Introduction to safe following distance: Safe following distance refers to the necessary gap that the rear vehicle maintains with the vehicle in front while driving to avoid accidental collisions. Precautions for driving in urban areas: Attention needs to be focused, speed needs to be controlled within a certain range, and traffic signals need to be observed at intersections. Drivers should unconditionally comply with road traffic safety laws and regulations at all times and in all situations. When drivers notice a vehicle in need of assistance while driving, they should slow down, stop, and offer help.

Was this review help?
104
Share
More Q&A

Can Antifreeze Be Used After 5 Years of Storage?

Generally, the shelf life of antifreeze is two years; long-life antifreeze has a longer validity period, which can range from three to five years. For specific details, check the expiration date on the packaging. Some car owners, who are not particularly meticulous about their vehicles and treat them more like workhorses, continue to use antifreeze even after it has passed its expiration date and has been opened for some time. As long as the antifreeze itself has not deteriorated, it can still be used without issues. If unsure, you can have a mechanic check its quality. When adding antifreeze, besides paying attention to its shelf life, you should also consider its boiling and freezing points. High-quality antifreeze typically has a boiling point around 110°C and a freezing point below -25°C, which are the main reasons why antifreeze provides anti-freeze and anti-boil functions.
103
Share

Does the Steering Wheel Control the Front or Rear Wheels?

The steering wheel is used to control the direction of the front wheels, constantly adjusting their orientation. In general household vehicles, such as sedans and MPVs, the front wheels are controlled for steering. Special vehicles, like forklifts and large excavators, use the steering wheel to control the rear wheels. Reasons for not controlling the rear wheels: 1. Instability: Rear-wheel steering has extremely poor stability, making it difficult to control at higher speeds, which goes against normal driving logic. 2. Cost-ineffectiveness: Current steering assistance systems are divided into hydraulic and electronic types. Electronic power steering theoretically doesn't require mechanical structures for steering, so purely rear-wheel steering could eliminate the need for mechanical backups. However, without mechanical backups, if the vehicle malfunctions, steering control would be lost. If mechanical backups are implemented, a steering rod as long as 1 to 2 meters would be required. Given that cost is a decisive factor in current vehicle manufacturing, this approach would never be permitted.
102
Share

Do You Need to Press the Brake When Shifting Gears in a Manual Transmission Car?

Shifting gears in a manual transmission car does not require pressing the brake. When shifting gears, you must first press the clutch pedal all the way down, and the operation of the gear lever should be light, quick, gentle, and precise. The starting steps for such a car are: 1. Insert the key and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch all the way down and turn the key to the 'start' position. Manual transmission cars are equipped with a manual gearbox, which works by switching different gear sets to achieve gear ratio changes. The manual gearbox consists of a power input shaft, an output shaft, and gears. The power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. Different gear ratios result in different power transmission effects, and shifting gears while driving refers to changing the gear ratio.
103
Share

What is the model positioning of the Haval H6?

The model positioning of the Haval H6 is a compact urban SUV. This vehicle is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. There are also two types of transmissions available: a 6-speed manual transmission and a 7-speed dual-clutch transmission. The dimensions of the Haval H6 are 4649 mm in length, 1852 mm in width, and 1710 mm in height, with a wheelbase of 2680 mm. The trunk capacity of this car is 808 liters without folding down the rear seats, and expands to 2010 liters when the rear seats are folded, offering ample space and excellent practicality. Haval is a brand specializing in manufacturing SUVs, with a wide range of SUV models under its lineup. Haval SUVs enjoy strong sales and a good reputation in the domestic market, known for their high cost-performance ratio, rich configurations, and attractive exterior design.
104
Share

Is 4WD Full-Time Four-Wheel Drive or Part-Time Four-Wheel Drive?

4WD refers to four-wheel drive. The classifications are as follows: 1. Full-time drive: The front and rear wheels always maintain a four-wheel drive mode, with the engine output torque distributed 50:50 between the front and rear wheels during driving. Full-time drive offers excellent driving control and tracking performance, but it consumes more fuel and has poor fuel economy. 2. Part-time drive: The driver can switch between two-wheel drive or four-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for general off-road vehicles or 4WD SUVs. 3. On-demand drive: The drive mode is controlled by a computer. Under normal road conditions, (front) rear-wheel drive is generally used. If the road is poor or the drive wheels slip, the computer will automatically detect and immediately distribute the engine output torque to the other two wheels, switching to four-wheel drive mode. This system is simple to operate.
108
Share

What to Do When the Manual Gear Lever Becomes Loose?

Manual gear lever becomes loose due to wear of the plastic washer at the linkage joint between the gear lever and the transmission or loosening of the screws. The following are the solutions and precautions: Solutions: Disassemble the gear lever, replace the new plastic washer and tighten the screws. If it does not affect daily gear shifting, it may not need to be replaced. Precautions for Manual Gear Shifting: The clutch pedal should be quickly pressed to the bottom. After shifting gears, the clutch pedal should be lifted quickly at the beginning, and when it reaches the semi-engaged state, it should be lifted slowly, and then lifted quickly until released. When shifting gears, master the timing of shifting, the clutch should be pressed to the bottom in one step, and gear shifting should also be done in one step. Familiarize yourself with the gear positions and practice the feel more.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.