···
Log in / Register

What is the reason for the windshield wiper not cleaning the rainwater properly after replacement?

6Answers
Emil
07/29/2025, 04:41:47 PM

The reason for the windshield wiper not cleaning the rainwater properly after replacement could be due to issues with the wiper rubber strip, or it might be because the newly replaced glass has oil stains, causing the wiper to not clean effectively when it rains. It is recommended to clean the glass with a cleaning solution and also check if there is any dirt on the wiper blade, wiping it with a towel. If the problem persists, it is advisable to visit a 4S shop for inspection. The wiper, also known as a windscreen wiper, water wiper, or windshield wiper, is a device used to wipe off raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all cars are equipped with wipers, and rear windows of vehicles such as hatchbacks and SUVs also have wipers.

Was this review help?
104
Share
DiAmelia
08/14/2025, 01:58:53 PM

I've encountered this situation several times. After replacing the windshield, the wipers don't clean properly. The main reason is that there's residual installation glue or protective coating left on the new glass surface, forming an oily film that leaves streaks when rain passes over it. If the wiper blades are aged or not adapted to the new surface, insufficient friction can also cause incomplete wiping. I recommend first thoroughly wiping the windshield with a dedicated glass cleaner to remove grease, then checking if the wiper blades are cracked or worn, replacing them if necessary. Develop the habit of covering the wipers with protective sleeves after parking to prevent dust accumulation. Clear visibility is crucial for safety, and addressing this small issue promptly can prevent bigger troubles.

Was this review help?
12
Share
Expand All
MaxLee
10/16/2025, 01:58:21 AM

I think the wipers don't work well after replacing the new windshield, possibly because the glass wasn't cleaned properly, the protective film wasn't removed after installation, or adhesive residue remained, causing the wipers to malfunction as if floating on water. Additionally, improper adjustment of the wiper arm angle or uneven force distribution can also cause issues. Last time my car had this problem—the wipers couldn't clean properly, and rainwater blurred my vision while driving, which was quite dangerous. Later, I wiped the glass several times with a mixture of white vinegar and water to remove the greasy residue, then checked and replaced the wiper blades, which completely solved the issue. Regularly replacing wiper blades is key; doing it every six months helps prevent problems. Safe driving starts with the basics—don't overlook the small details.

Was this review help?
10
Share
Expand All
DelAbigail
11/29/2025, 01:45:53 AM

In my driving experience, when the rear windshield wiper doesn't wipe smoothly, it's often due to oil residue on new glass or old wiper blades being clogged with dirt. A simple solution is to wash the glass surface with soapy water to remove the oil film. If the wiper squeaks or has cracks, replace the blade. In daily maintenance, wipe the glass once a week to keep it clean, and ensure the wipers are compatible before changing cars. A clear view makes driving more reassuring.

Was this review help?
10
Share
Expand All
StVivian
01/19/2026, 03:09:36 AM

I think the rear windshield wiper doesn't clean properly, often due to glue residue from new glass installation causing an oily film that hinders the wiper's effectiveness. Additionally, uneven wear or pressure on the wiper blade itself can lead to uneven wiping. I recommend immediately cleaning the surface with a detergent after replacing the glass and checking the wiper blade's condition for timely replacement. For prevention, make it a habit to replace the wiper blades every quarter, and ensure the technician adjusts the position properly during installation to avoid damaging old components. A little maintenance can significantly improve rainy-day safety.

Was this review help?
11
Share
Expand All
VanNova
04/15/2026, 04:13:54 AM

Haha, new windshield wipers not cleaning properly? That's an old issue—grease residue on the glass prevents the wipers from gripping, leaving water streaks. My buddy's car had the same problem after lazy windshield cleaning during a car wash, causing chaotic visibility in rain. We fixed it by thoroughly wiping the glass with alcohol to remove grease, then replacing with affordable wiper blades. Remember, new parts sometimes conflict with old ones—regular checks save headaches. The joy of driving lies in solving problems.

Was this review help?
5
Share
Expand All
More Q&A

What is the sequence of steps for starting and stopping an automatic transmission vehicle in Subject 2?

To start, first press the brake and clutch pedals, then shift into first gear. At the same time, place your right hand on the handbrake and your left hand on the steering wheel. Slowly release the clutch while gradually releasing the brake. When the clutch reaches the point where the vehicle begins to vibrate, keep your foot steady on the clutch and simultaneously release the handbrake with your right hand. Now, move your foot from the brake to the accelerator, gently press the accelerator, and slowly release the clutch to smoothly start the vehicle. When you need to stop again, press both the brake and clutch pedals simultaneously and gradually to bring the vehicle to a halt. Then, engage the handbrake, shift into neutral, release the brake and clutch pedals, and the vehicle will come to a complete stop, allowing you to exit.
117
Share

Should the CT5 use 92 or 95 octane gasoline?

The Cadillac CT5 requires 95 octane gasoline, as per official specifications. The CT5 is a mid-size sedan under the Cadillac brand, officially launched on November 18, 2019. For the 2022 model year, the 28T Premium, Platinum, Fashion, and Luxury (standard version) variants measure 4924/1883/1445 mm in length/width/height, with a wheelbase of 2947 mm. Powering the Cadillac CT5 is a 2.0T variable-cylinder turbocharged engine, delivering a maximum power of 174 kW and peak torque of 350 N·m, while meeting the China VI emission standards. The transmission system is paired with a 10-speed automatic manual transmission. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it indicated on the fuel tank cap. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade. High compression ratio engines can also be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Using 95 octane gasoline significantly reduces engine vibration compared to 92 octane. 95 octane gasoline burns more completely than 92 octane, resulting in less carbon buildup in the engine and stronger vehicle performance due to more thorough combustion. Different octane ratings lead to varying anti-knock properties. Gasoline is a mixture produced by adding a certain amount of anti-knock agents to the same base gasoline, resulting in gasoline with different anti-knock performances. Different gasoline components, such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline obtained from petroleum refining, are refined and blended with high-octane components, primarily used as fuel for spark-ignition internal combustion engines in vehicles. If the Cadillac CT5 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use low-octane gasoline, using high-octane gasoline will not cause damage, but the increase in octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use high-octane gasoline, using low-octane gasoline can cause engine knocking. The significantly lower octane rating lowers the gasoline's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance is generated during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in severe cases.
104
Share

How to Replace the Battery in a Dongfeng Car Key?

Eject the car key and use a flathead screwdriver to pry open the cover by leveraging the gap in the middle of the key compartment. After opening the key, remove the rear section. Gently pry the gap near the back with a flathead screwdriver to reveal the remote key's chip. Remove the key chip, and you will see the battery compartment on the back. Gently push the battery out with the screwdriver. Before installing the new battery, confirm that the replacement battery's model and voltage match the original. Ensure correctness before proceeding. Reassemble the remote key in reverse order of disassembly, then test it.
105
Share

Can a smart car run long distances?

smart cars can run long distances, but if it is a smart car that needs to be charged, it is recommended not to drive too far to avoid running out of power halfway. The smart is a microcar, suitable for short trips, but for long-distance travel, the comfort of the driver and passengers may be quite poor over time, so it is best not to use it for long distances. In most cases, the smart can serve as the second or third car in a household for urban commuting. Here is a brief introduction to the smart: 1. smart is a brand under Mercedes-Benz, primarily targeting the microcar market. The smart models currently on the market include the smart fortwo and smart forfour, which differ mainly in being two-door and four-door versions, respectively, while being similar in configuration and power. Below, the smart fortwo will be used as an example for detailed explanation. 2. In terms of power, the smart fortwo is equipped with a 1.0-liter naturally aspirated engine and a 0.9-liter turbocharged engine. The 1.0-liter naturally aspirated engine version has a maximum horsepower of 71 hp, while the 0.9-liter turbocharged engine version has a maximum horsepower of 90 hp. 3. In terms of fuel consumption, according to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the 1.0-liter version of the smart fortwo has a comprehensive fuel consumption of 4.4L/100km, and the 0.9-liter version has a comprehensive fuel consumption of 4.9L/100km.
110
Share

How to Check the Jaguar Engine Oil Level?

First, you need to open the hood. Locate the engine oil dipstick handle in the engine compartment and prepare a piece of tissue. Pull out the dipstick, use the tissue to wipe the dipstick head clean. You can also see the scale markings on the dipstick. Reinsert the cleaned dipstick, then pull it out again. This time, observe the oil adhering to the end of the dipstick. Check the oil level on the dipstick. If the oil level is between the lower and upper limits, it indicates the optimal position, meaning the engine oil quantity is appropriate.
120
Share

How to Clean the Engine When Engine Oil Gets Mixed with Water?

If the engine only has mixed water vapor, simple treatment is sufficient. Just clean the water vapor from the air filter, throttle valve, and cylinders. If the engine has taken in a significant amount of water but can still operate normally, it is necessary to replace the engine oil and clean the related engine components. If a large amount of water has entered the engine but the car has not been started, reassemble it and replace the engine oil. If the engine has taken in a large amount of water and cannot operate after starting, the cylinders, connecting rods, pistons, etc., may have deformed, requiring replacement of the entire engine.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.