What is the reason for the TC light on the Buick GL8 dashboard?

Is the spark plug continuously working during engine startup?

During engine startup, the spark plug is continuously working. Its working principle involves generating an arc between the electrodes through voltage to ignite the air-fuel mixture in the cylinder, thereby maintaining the normal operation of the engine. The function of the spark plug is to discharge the high-voltage pulse electricity delivered by the high-voltage wire, break down the air between the two electrodes of the spark plug, and generate an electric spark to ignite the air-fuel mixture in the cylinder. Automotive spark plugs are categorized into: 1. Standard spark plugs: The insulator skirt is slightly recessed into the shell end face, and the side electrode is outside the shell end face; 2. Insulator-protruding spark plugs: The insulator skirt is longer, protruding beyond the shell end face; 3. Fine-electrode spark plugs: The electrodes are thin, characterized by strong sparks and better ignition capability.

109

Share

Is the 1.5T Avancier's Power Sufficient?

1.5T Avancier's power is sufficient. Here is more information about the Avancier: 1. It is equipped with a 1.5T turbocharged engine with a maximum power of 142kW and a peak torque of 243Nm, paired with a CVT transmission. The Avancier's interior offers a warm and premium feel, and whether it's the 370TURBO or 240TURBO, there is no compromise in craftsmanship or other aspects due to price differences. Except for the base model, the front and rear seats of the Avancier are wrapped in genuine leather. This Moon White interior surface features a special coating, so there's no need to worry about it being hard to keep clean. 2. The 1.5T Avancier comes standard with LED combination taillights and power-folding exterior mirrors. Except for the base Elite model, the other three models are equipped with a panoramic sunroof. The Avancier will feature a standard 4-way adjustable multifunction steering wheel, paddle shifters, 8-way power-adjustable driver's seat, and 4/6 split-folding rear seats as standard equipment.

112

Share

What kind of oil should be used for Volkswagen Tharu?

Volkswagen Tharu uses 5w-40 or 0w40 fully synthetic original engine oil. For later maintenance and oil changes, you can choose from brands such as Mobil, Shell, and Castrol. Any 40-viscosity oil that meets Volkswagen's 502 certification can be used. For Volkswagen Tharu 1.4T and 2.0T models, 5w-40 fully synthetic oil is recommended. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Tharu is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the oil level is within the standard range.

109

Share

What to Do When BYD Qin Fails to Start?

The main power switch is not turned on. This switch is usually located in the cockpit and it cuts off all low-voltage power to the vehicle. It needs to be turned on. The auxiliary battery is severely depleted. In this case, simply charge the auxiliary battery or jump-start it using another vehicle. Check if there is poor contact at the positive and negative terminals of the auxiliary battery or if any wiring harness has come loose. You can manually inspect and reconnect them if necessary. You can also check if the starter battery is faulty. If it has been in use for 4-5 years, it may need to be replaced.

116

Share

Why does the Haval H6 experience jerking during acceleration?

Haval H6 experiencing jerking during acceleration is due to driving habits and the type of transmission fluid. Below are the details for these two situations: Caused by driving habits: When accelerating at low speeds, the issue may arise from pressing the throttle too aggressively, leading to higher RPMs. Visit a 4S shop for inspection: If it's not due to driving habits, it is recommended to visit a 4S shop for a check-up, especially concerning the transmission fluid. Issue with the type of transmission fluid: Another factor to consider is the type of transmission fluid. If the vehicle has had its transmission fluid replaced at a private repair shop, the problem might be due to using incompatible transmission fluid.

110

Share

How to reset the maintenance light on Fengshen AX7?

The method to reset the maintenance light on Fengshen AX7 is: 1. Turn on the ignition switch while holding down the odometer reset button for several seconds; 2. Rotate the key to turn off the engine and wait for 10 seconds to complete the reset. Taking the 2021 Fengshen AX7 Manual Zhixiang Edition as an example, it belongs to the compact SUV category with body dimensions of: length 4645mm, width 1880mm, height 1670mm, wheelbase 2715mm, and a fuel tank capacity of 61L. The 2021 Fengshen AX7 Manual Zhixiang Edition is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power speed of 5500rpm, and maximum torque speed ranging from 1800 to 4000rpm.

120

Share