···
Log in / Register

What is the reason for the black screen with sound in the MG6 central control screen?

6Answers
LaMariana
07/29/2025, 02:13:26 AM

The reason for the black screen with sound in the MG6 central control screen is a crash caused by unstable working voltage of the motherboard, damage to the touch screen, or the decoding chip or core module not working or being damaged. Introduction to the central control screen: The central control color screen is the display on the central console, mainly showing car audio, navigation, vehicle information, reverse images, etc. It includes single-touch LCD screens and multi-touch LCD screens. Maintenance of the central control screen: Neutral cleaning agents are essential. Cleaning naturally requires professional liquids, and specialized cleaning solutions are the best choice. You should also have cotton swabs and soft brushes on hand, mainly for cleaning small gaps. Dust in these tiny gaps is difficult to remove, so these small cleaning tools are necessary. A towel is used to wipe the surface of the central console. Also, pay attention to the car display screen to prevent water droplets from entering it. Wipe the screen with a towel, then clean the edges of the screen with a soft brush to keep the display clean.

Was this review help?
102
Share
Harper
08/12/2025, 05:21:58 PM

I've been driving a MG6 recently and encountered the issue of a blacked-out infotainment screen with sound still working, which is quite annoying. The cause could be a faulty backlight or loose circuit connection, interrupting the video signal while the audio part remains functional. Another common issue is software bugs, like sudden system crashes requiring a reboot to recover. Check if the screen's connecting cables are securely plugged in, or try holding down the power button for a reboot. If the problem persists frequently, visit a 4S dealership for professional diagnosis—screen repairs aren't cheap, costing several hundred yuan. For prevention, regularly clean screen dust, avoid prolonged sun exposure damaging circuits, and keep software updated to avert issues. Don't overlook this seemingly minor fault—it could jeopardize navigation or reverse camera functions, posing real risks. Take it seriously.

Was this review help?
10
Share
Expand All
LeGianna
10/03/2025, 10:29:04 PM

MG6 central control screen blackout with sound? I've experienced this several times. The core issue lies in video output failure while the audio circuit remains intact. Causes include LCD panel malfunction, loose video signal cables, or poor motherboard contact. Sometimes a simple vehicle restart works; if not, try reconnecting the screen cables. From an economic perspective, minor repairs may cost some money, but don't let it escalate. Related consideration: vehicle electronic systems are prone to aging, especially on bumpy roads which exacerbate connection looseness. Be cautious when temporarily relying on audio functions while driving.

Was this review help?
9
Share
Expand All
Ricardo
11/16/2025, 11:04:39 PM

The central control screen is black but still producing sound, possibly due to screen hardware defects or software conflicts. Checking the screen backlight and connection lines is crucial. When handling the issue, first power off and restart; if ineffective, contact maintenance to prevent safety hazards that may affect driving safety.

Was this review help?
12
Share
Expand All
RafaelLynn
01/07/2026, 12:41:25 AM

When the central control screen of my MG6 goes black but still has sound, it's quite frustrating. The common causes are power supply issues with the display or faults in the video processing module, while the audio chip operates independently. Try restarting or checking the tightness of the connectors to avoid spending hundreds on repairs. On a related note, modern cars have multiple electronic system failure points, so avoid pressing the screen too hard to prevent damage.

Was this review help?
7
Share
Expand All
SanAva
04/03/2026, 11:42:59 PM

When using the MG6, it's common to encounter a black screen while the sound is still playing. Analysis suggests it's mostly a circuit issue: the display part, such as a burnt backlight or interrupted video signal, while the audio continues normally. Try restarting by cutting the power or gently tapping the panel. If that doesn't work, seek professional inspection. Pay attention to signs of aging, especially in humid weather when problems are more likely to occur. Regularly ensure ventilation and keep the area dry. Don't underestimate this issue—it significantly impacts the driving experience.

Was this review help?
17
Share
Expand All
More Q&A

Where are the clutch and brake on a motorcycle?

Motorcycle clutch is located on the left handlebar head, and the brake is in front of the right foot pedal. Function of motorcycle clutch: To transmit or cut off power transmission between the engine crankshaft and the gearbox, enabling gear shifting and gearbox speed matching at different times. Methods to determine clutch wear: When the engine speed remains unchanged, a noticeable decrease in driving speed compared to before is felt; while driving, it's observed that although the engine speed increases, the vehicle speed changes insignificantly; when the main stand is raised to lift the rear wheel off the ground, engaging first gear, maintaining a small throttle, and slowly pressing the rear brake pedal, it's clearly felt that the rear wheel starts to brake, but the engine speed does not decrease significantly; when changing the engine oil, if there are small gray substances in the black oil, it can be judged as clutch wear.
101
Share

How to install navigation in the Bestune X40?

Method for installing navigation in the Bestune X40: First, the navigation module needs to be installed, and the glove box must be removed to expose the internal wiring harness and installation position; install the navigation module and connect the wiring; then reassemble the glove box components, screws, and side covers in the reverse order of removal; next, install the antenna; after installation, reassemble the speaker and cover panel in reverse order; after installation is complete, turn on the navigation for debugging. This car is 4310 mm long, 1780 mm wide, and 1680 mm high, with a wheelbase of 2600 mm. The Bestune X40 is rugged and stylish, with a novel exterior, a simple yet tech-savvy interior, and a dynamic, robust design style, giving the entire vehicle a sense of lightness; the hexagonal front grille, inheriting the Bestune gene, has strong recognition; the sleek and streamlined front headlights are highly distinctive, full of inspiration, appearing intelligent and dynamic.
116
Share

How Often Should Sunroof Grease Be Applied?

It is recommended to maintain the sunroof every 2 to 3 months. Gently wipe the sunroof tracks and rubber seals with a damp sponge, then spray with a rubber protectant and lubricate the sunroof's mechanical components and tracks. Regularly clean the sunroof: If the car is frequently used in dusty or sandy areas, it is advisable to wipe the dust or debris from the sunroof tracks with a damp sponge every month. Thoroughly clean the sunroof: If the vehicle will be parked for an extended period or the sunroof won't be used for a long time, apply a fine talcum powder or a specialized lubricant for rubber seals around the sunroof to perform a thorough cleaning. This prevents chemical changes in the rubber seals due to prolonged exposure to air.
110
Share

What are the functions of the interior buttons in the 2019 Bora?

Here is an introduction to the interior buttons and their functions in the 2019 Bora: 1. Electronic Stability Program (ESP), which effectively prevents body skidding, tail spinning, and other loss-of-control situations. It is generally not recommended for drivers to manually turn it off. 2. Hazard warning lights, used in special situations such as car breakdowns or temporary parking, mainly serving to alert other vehicles. 3. Parking radar, the central control screen can display the reversing image, and the radar will emit an alarm sound when detecting nearby obstacles. 4. Driving assistance system, capable of providing warning protection, close-distance warning, and fatigue reminders. 5. Auto Hold, which relieves foot fatigue when waiting at traffic lights by automatically locking the wheels with the brake calipers. Pressing the accelerator again will allow the vehicle to continue moving. 6. Auto Start-Stop, where the engine shuts off during brief stops and restarts when the driver's foot leaves the brake pedal.
111
Share

Which Rusts Faster, High Ground Clearance or Low Ground Clearance?

Low ground clearance vehicles rust faster because they are more frequently exposed to sewage and dirt, which can lead to rust. Timeframe for rusting: Areas without damage may not rust for five or six years. The vehicle's chassis is coated with spray paint upon leaving the factory. However, if the chassis is frequently scraped, the paint may wear off, exposing the metal, which then rusts easily. Causes of chassis rust: Summer heat from the ground, acid rain, and flying stones on gravel roads can corrode the vehicle's chassis. Exhaust fumes and noise can also seep in through corroded holes. "Chassis sealing" can help prevent corrosion, rust, and impact damage, while also providing some noise reduction.
119
Share

What Causes Jerking When Accelerating at Low Speeds in a New Car?

The reasons for jerking when accelerating at low speeds in a new car include excessive carbon buildup in the throttle body, poor fuel quality, and differences in vehicle types. Excessive carbon buildup in the throttle body: Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking due to carbon deposits. It is recommended to regularly clean carbon deposits. Poor fuel quality: Poor or mismatched fuel quality can lead to incomplete combustion. Different vehicle types: In manual transmission vehicles, jerking can occur when accelerating or decelerating while the clutch is partially engaged. The deeper the throttle is pressed, the more pronounced the jerking becomes. In automatic transmission vehicles, there may be slight jerking when accelerating and upshifting, and it becomes more noticeable when forcefully downshifting and then upshifting with a heavy throttle.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.