···
Log in / Register

What is the process for applying for a duplicate vehicle license online?

6Answers
BryceFitz
07/28/2025, 11:43:27 PM

The process for applying for a duplicate vehicle license online, taking the Traffic Management 12123 platform as an example: After registering and logging in, select "Apply for Duplicate/Replacement Vehicle License" under the vehicle-related services section. After confirming the vehicle information, fill in personal identity details, type of service, reason for application, and method of receiving the document as required. If you choose mail delivery, you will also need to provide the mailing address for the document and upload photos of the front and back of your ID card. After submission, you will need to pay the processing fee online, and then simply wait for the document to be delivered to your door. Upon successful submission of the relevant information, the vehicle management office staff will review and process the application within 1 to 3 working days. Once approved, a new vehicle license will be produced, and the postal department will be notified for delivery. When the document is delivered, you will need to provide a copy of your ID card and the original undamaged vehicle license to the delivery personnel, along with paying a certain mailing fee.

Was this review help?
117
Share
McAthena
08/12/2025, 10:52:12 AM

Last time I replaced my vehicle license was done entirely on my phone, and the whole process wasn't too complicated. First, I downloaded the official 'Traffic Management 12123' app, registered an account, and completed real-name authentication by uploading both facial recognition scans and ID card photos to ensure information matched. Then in the service menu, I selected the 'Replace Vehicle License' option, entered my license plate number and engine number - the system automatically pulled up my vehicle information. I needed to upload several documents: front/back copies of my ID card, scanned vehicle registration certificate, plus a loss statement/damage proof (I just filled out an electronic form directly in the app). After uploading, I paid the administrative fee and small delivery charge (around tens of RMB) via WeChat Pay or Alipay. The new license arrived at my doorstep within 2-3 days after approval, with zero in-person visits required. If documents don't match, the app prompts for corrections - I once had to retake blurry photos, so preparing error-free materials beforehand is crucial. The entire process takes under 30 minutes - super time-efficient, but always use official platforms and ignore those third-party service ads to avoid scams.

Was this review help?
19
Share
Expand All
JosephineDella
10/02/2025, 03:17:16 AM

Applying for a duplicate vehicle license online is quite convenient. I did it for my car last year. First, you need to prepare the required materials: a photo of your original ID card, a loss statement or scanned copy of the vehicle license, and a picture of the vehicle registration information page. Using a mobile app like Traffic Management 12123 is the most convenient way to handle this. After logging in, click on the business options and find the module for applying for a duplicate or replacement license. Follow the steps to fill in the license plate and owner information. When uploading the materials, pay attention to the size and clarity—the system will prompt you to retake the photo if it's blurry, which helps avoid delays. The payment process is quick, with a fee of around 20 yuan plus about 10 yuan for mailing. After paying online, wait for the review, which usually takes up to three days before mailing. The entire process can be done from home without taking time off to visit the vehicle management office. However, it's advisable to check the specific local requirements in advance, as there may be slight differences between regions, such as whether the old license needs to be submitted in person.

Was this review help?
16
Share
Expand All
MaliaAnn
11/15/2025, 09:12:56 PM

Online replacement of the vehicle license is super easy! I got it done in just a few minutes using the Traffic Management 12123 APP. After registering and verifying my identity, I uploaded the required material photos—ID card and a lost vehicle license declaration are mandatory. After paying the fee, I just waited for it to be mailed. The whole process was hassle-free without even stepping out.

Was this review help?
7
Share
Expand All
MiaLynn
01/05/2026, 10:49:26 PM

I recommend applying for a duplicate vehicle license online, which is quite practical. The process involves logging into the official app like Traffic Management 12123, filling in the vehicle information and owner details, uploading photos of the ID card and supporting documents, making the payment, and then waiting for delivery by mail. Remember to prepare all the materials properly and avoid blurry photos that may require resubmission, as it wastes time and prolongs the waiting period. The app operation is intuitive and as convenient as online shopping.

Was this review help?
3
Share
Expand All
LaPhoebe
04/02/2026, 10:21:51 PM

The process of replacing a driving license online is not difficult, and I'd like to share my experience. Register an account on the Traffic Management 12123 APP or official website, complete identity verification, and enter the license replacement service to upload materials including ID card and vehicle information photos. After paying the processing fee and postage, wait for review and delivery to your home. A reminder: don't forget to check material details such as photo clarity to avoid delays; for safety, only trust official channels and avoid agents to prevent fraud. The entire process is electronic, efficient, and reliable.

Was this review help?
10
Share
Expand All
More Q&A

How to Deal with Loud Noise When the Santana's Air Conditioning is On?

You can install some high-quality sound-absorbing foam materials under the engine hood, which not only helps suppress vibrations caused by the hood but also absorbs a significant amount of noise. Below are solutions for noise issues in the Santana: 1. Excessive Tire Noise: Tire noise is usually generated by friction and impact between the tire surface and the ground, and it is transmitted into the cabin along with vibrations from the fenders and wheel wells. Installing soundproofing materials on the doors, fenders, and wheel wells can effectively reduce noise. 2. Excessive Wind Noise: Wind noise mainly results from friction between the car body and air during driving and enters the cabin through door gaps. Besides adding soundproofing materials inside the doors, you can also choose to install or replace door seals. Since seals are rubber products, they may degrade over time, reducing their soundproofing and sealing effectiveness. However, excessive sealing layers can hinder smooth door operation and cause door deformation, so they should not be too thick. 3. Body Vibration Noise and Rattles: Some cars may have significant wind noise, which could be related to the vehicle's design or caused by poor assembly or design flaws, such as loose screws or aging shock-absorbing rubber pads. Typically, tightening screws or replacing parts can resolve these issues.
117
Share

How to Enable Stationary Exhaust Self-Cleaning for Fengjun 5?

When the Great Wall Fengjun 5's engine runs at 2000 RPM, the system will automatically clean carbon deposits in the exhaust. Below are the specific details of the Great Wall Fengjun 5: 1. Vehicle Positioning: The Fengjun 5 is a pickup truck under the Great Wall brand, with dimensions of 5095mm in length, 1800mm in width, and 1740mm in height, a wheelbase of 3050mm, and a front-engine, rear-wheel-drive layout. 2. Powertrain: It is equipped with a 2.4L naturally aspirated engine, delivering a maximum torque of 230 Nm, paired with a 5-speed manual transmission. 3. Suspension Type: The front suspension features a double-wishbone independent suspension, while the rear suspension uses a leaf spring non-independent suspension, with tire specifications of 235/70R16.
105
Share

What is the 0-100 km/h acceleration time of the Q5?

According to official data, the Audi Q5 equipped with a 2.0T four-cylinder engine achieves a 0-100 km/h acceleration time of 6.65 seconds, which offers a certain advantage compared to similar models. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Audi Q5 produces 190 horsepower and a maximum torque of 320 Nm, achieving a 0-100 km/h time of 6.65 seconds. In comparison, the Volvo X60 has a maximum power output of 407 horsepower and a maximum torque of 640 Nm, achieving a 0-100 km/h time of 5.9 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi Q5 uses a 7-speed dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Audi Q5 has a power-to-weight ratio of 100 Hp/T, achieving a 0-100 km/h time of 6.65 seconds. The Volvo X60 has a power-to-weight ratio of 214 Hp/T, achieving a 0-100 km/h time of 5.9 seconds.
105
Share

How to Open the Trunk of Roewe i5?

It can be opened manually. There is a button on the black panel directly above the middle of the license plate. Press the button when the vehicle is unlocked to open the trunk. Below is an introduction to the Roewe i5: 1. Exterior Design: Depending on the trim level, the Roewe i5 offers two styles for the rear logo, lower guard plate design, fog lamp trim, exterior rearview mirrors, and lower grille. There are four wheel rim styles to choose from, and options include a sunroof, spoiler, and door trim. 2. The interior of the new car is a major highlight, featuring a symmetrical design with extensive soft leather upholstery, zero-gravity luxury seats, soundproofing materials, and a double-sided galvanized chassis design, sincerely providing a comfortable experience. 3. Configuration: The Roewe i5 is equipped with the new SAIClink intelligent system that recognizes all Android/iOS devices, VDC vehicle stability system, hill start assist, traction control system. Higher trim models also include features like a panoramic camera, XDS electronic differential lock, hydraulic brake assist, and side air curtains.
108
Share

What does the China-spec version of a car mean?

China-spec version refers to the models produced by manufacturers specifically for the Chinese market. Some large foreign automobile manufacturers produce different specifications of vehicles to suit various regions. Below are some relevant details about China-spec cars: 1. China-spec cars generally have better audio systems, superior sealing, and advantageous power tuning, but the navigation screen may need to be updated to display Chinese, and some speedometers may show miles. 2. China-spec cars have adjusted relevant programs to accommodate Chinese fuel quality, enhancing fuel compatibility. 3. The suspension systems of China-spec cars are retuned according to Chinese road conditions, making them more suitable for driving on Chinese roads. 4. China-spec cars have specially improved intake systems based on China's air conditions. In contrast, Europe-spec cars are designed according to foreign air quality standards, resulting in relatively higher failure rates during use.
108
Share

Where is Wuling Produced?

Wuling Motors has two major production bases located in Liuzhou, Guangxi and Qingdao, Shandong. As a renowned brand in China's automotive industry, Wuling Motors is an international and modern manufacturer of micro and small vehicles. Currently, Wuling Motors has also launched a global vehicle program. One of the best-selling models under the Wuling brand is the Wuling Hongguang S. The Wuling Hongguang S is equipped with two types of engines: 1. A 1.2-liter naturally aspirated engine with a maximum power of 56 kW and a maximum torque of 110 Nm. This engine delivers its peak torque between 3,000 and 4,000 rpm and is paired with a 5-speed manual transmission. 2. A 1.5-liter naturally aspirated engine with a maximum power of 73 kW and a maximum torque of 140 Nm. This engine reaches its peak torque between 3,400 and 4,400 rpm and is matched with a 6-speed manual transmission.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.