···
Log in / Register

What is the principle of the car front blind guide rod?

1Answers
DelOscar
09/06/2025, 01:00:29 AM

Determines the front position of the car through soft contact. Here is additional information: 1. Origin of the blind guide rod: It belongs to Japan's modified car culture, which reached its peak in the early 1990s. Among these modified cars, many owners liked to install blind guide rods on their cars. However, it is rare to see car owners installing blind guide rods in the domestic modification market, possibly due to cultural differences between the two countries. 2. Function of the blind guide rod: The blind guide rod on the car can help the driver better judge the position of the front of the car, assist the driver in determining the distance between the car and obstacles, and play a role in protecting the car. Many older car models have installed blind guide rods.

Was this review help?
103
Share
More Q&A

What Are the Reasons for Ineffective Braking?

The reasons for ineffective braking: 1. Excessive wear of brake pads: Brake pads have a service life. Once they are excessively worn, they should be replaced promptly. Otherwise, it can easily lead to ineffective braking and may also affect the brake discs. In severe cases, it can cause damage to the braking system. 2. Deterioration of brake fluid: Over time, brake fluid absorbs moisture from the air, which lowers its inherent boiling point. When the boiling point drops significantly, it can affect the vehicle's braking performance, resulting in ineffective braking. 3. Driving too fast in rainy conditions: In rainy weather, a layer of water film forms on the tires, which can slightly reduce their braking performance. If you drive at high speeds under these conditions, ineffective braking may occur. 4. Newly replaced brake pads: Newly installed brake pads have not yet been properly broken in with the vehicle.
103
Share

What is the engine model of the Baojun 730?

The Baojun 730 has three engine models: 1. The 1.5L naturally aspirated engine model is L2B; 2. The 1.5T turbocharged engine model is LL5; 3. The 1.8L naturally aspirated engine model is LJ479QNE2. The Baojun 730 is an MPV with dimensions of 4780mm in length, 1780mm in width, and 1740mm in height. It features a 5-door, 7-seat MPV body type and is paired with a 6-speed manual transmission. The Baojun 730 adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. The body structure is of a unibody design.
119
Share

What Causes the Exhaust Pipe to Glow Red?

Reasons for the exhaust pipe glowing red: 1. Some of the combustible gas in the cylinder enters the exhaust pipe and continues to burn; 2. Excessive valve clearance or overly soft valve springs causing delayed valve opening; 3. Improper valve timing with early opening and late closing; 4. Delayed ignition timing and excessive carbon buildup in the exhaust pipe or muffler. During maintenance, adjust the air-fuel mixture concentration, inspect and adjust valve clearance, and correct ignition or fuel injection timing. Remove the exhaust pipe and muffler, disassemble the muffler, then clean carbon deposits by soaking in kerosene or scraping with a blade. Alternatively, the muffler core can be dried over an open flame before final cleaning with a wire brush.
103
Share

How Often Should the Tensioner Pulley Be Replaced?

The tensioner pulley is generally replaced every 2 to 3 years or after driving approximately 60,000 to 70,000 kilometers. It is usually replaced along with the timing belt. The tensioner pulley is a belt tensioning device used in the automotive transmission system, mainly composed of a fixed housing, tensioning arm, pulley body, torsion spring, rolling bearing, and spring sleeve. It can automatically adjust the tension according to the belt's varying tightness, ensuring a stable, safe, and reliable transmission system. The tensioner pulley is a wear-prone component in automotive parts. Over time, the belt can easily stretch. Additionally, the tensioner pulley makes the belt run more smoothly, reduces noise, and prevents slippage.
115
Share

Has the Land Rover Velar been domestically produced?

Land Rover Velar has not been domestically produced; it is an imported mid-size SUV under the Land Rover brand. The Land Rover Velar is equipped with three types of engines: a 2.0-liter turbocharged engine, a low-power version of the 3.0-liter supercharged engine, and a high-power version of the 3.0-liter supercharged engine. All three engines are typically paired with an 8-speed automatic transmission. The Land Rover Velar features a full-time four-wheel-drive system and uses a multi-plate clutch-type central differential. The wheelbase of the Land Rover Velar is 2874 mm, with overall dimensions of 4811 mm in length, 2032 mm in width, and 1685 mm in height. The front suspension of the vehicle employs a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension.
104
Share

What are the symptoms of overcharged car refrigerant?

Symptoms of overcharged car refrigerant: Limited expansion space for refrigerant, reduced heat transfer capacity, increased high pressure, shortened compressor lifespan, increased likelihood of leaks, frequent on-off cycling of the air conditioning due to high pressure triggering the protection system, and degraded cooling performance. The refrigerant quantity should be moderate - both insufficient and excessive amounts will affect cooling performance. Vehicle owners must strictly follow the specifications and technical parameters in the maintenance manual when adding refrigerant. Refrigerant should not be insufficient either, as inadequate pressure will result in poor air conditioning cooling performance. In vapor-compression refrigerators, besides requiring good thermodynamic and physicochemical properties, the selected refrigerant should also possess excellent environmental characteristics.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.