···
Log in / Register

What is the minimum ground clearance of the Touran L?

6Answers
McGiselle
07/29/2025, 06:48:47 AM

The minimum ground clearance of the Touran L is 120mm. The minimum ground clearance of a vehicle refers to the distance between the lowest point of the car's chassis and the ground when the vehicle is fully loaded. This measurement directly reflects the vehicle's ability to pass through complex road surfaces without obstruction and indicates its capability to traverse obstacles such as rocks and tree stumps without collision. A smaller ground clearance means a weaker ability to overcome obstacles. The Touran L is an MPV series model under SAIC Volkswagen, with dimensions of 4527mm in length, 1829mm in width, and 1659mm in height, and a wheelbase of 2791mm. In terms of configuration, this vehicle offers six major value-added optional packages, including features such as a panoramic sunroof, a seven-seat layout, and an integrated child safety seat, which are highly sought-after configurations.

Was this review help?
107
Share
DominicMarie
08/13/2025, 12:06:30 PM

I've been driving the Touran L for several years, and its minimum ground clearance is around 132 mm, which is quite suitable. Whether dropping the kids off at school or driving around the city, it handles speed bumps and small potholes easily without scraping the undercarriage. If the clearance were too low, say below 100 mm, driving on uneven roads would be troublesome; too high, and it would affect stability. The Touran L's center of gravity is well-designed, so it doesn't lean too much when turning. I also enjoy driving in the suburbs, and the 132 mm clearance handles dirt roads just fine. I regularly check tire pressure and the suspension system because low pressure can reduce clearance, so it's important to keep everything in good condition. Overall, this car is practical and safe, perfect for daily family use.

Was this review help?
5
Share
Expand All
CharlesAnn
10/07/2025, 03:14:12 AM

From my experience, the Touran L's minimum ground clearance of 132mm is standard and sufficient for city driving. I often go on outdoor adventures, and this height makes the car more stable on gravel roads, but when encountering deep potholes, it's necessary to slow down to avoid damage. Speaking of influencing factors, the vehicle's weight and suspension tuning affect the actual clearance: when fully loaded, it may drop to around 120mm, so you need to be mindful. Adding an underbody guard can provide better protection. Compared to other vehicles like SUVs with 200mm clearance, the Touran L focuses more on balancing fuel efficiency and handling. It's advisable to check the road surface before driving and keep the wheels clean to prevent debris from getting stuck. This design makes long trips more worry-free.

Was this review help?
2
Share
Expand All
WestonFitz
11/20/2025, 03:37:45 AM

Having driven for many years, the Touran L's minimum ground clearance of 132 mm is well-designed. In terms of safety, this height reduces bumpiness and provides a stable center of gravity, making it less prone to rollovers. On asphalt roads, it offers low noise and good comfort. The clearance size is affected by tire wear—new tires may approach 132 mm, while worn tires may reduce to 125 mm, necessitating timely replacement and maintenance. Compared to other MPVs, the Touran L strikes a balance between passability and fuel efficiency. As an urban vehicle, it is practical and fuel-efficient, with regular maintenance helping to extend component lifespan.

Was this review help?
6
Share
Expand All
DiKinsley
01/10/2026, 10:25:54 PM

I drive the Touran L to work every day, and its 132mm minimum ground clearance is just right. There are no major issues when going over speed bumps or small bumps, with the body staying stable and not shaking. The smaller clearance helps save fuel, with lower wind resistance and stable speed. Let's talk about the difference between empty and fully loaded: the weight increases, reducing the clearance to 125mm, but adjusting the tire pressure properly can compensate. The design balances comfort and economy, making it a smart choice for a family car. Simple maintenance like cleaning the undercarriage can keep its performance intact.

Was this review help?
16
Share
Expand All
HarrisonAnn
04/07/2026, 02:49:21 AM

I often engage in car modifications. The standard minimum ground clearance of the Touran L is adjustable up to 132mm. Installing a suspension upgrade kit can raise it to over 150mm, but you need to consider the cost and impact on handling. The factory height is suitable for most road conditions, avoiding scrapes. Increasing the clearance improves off-road capability but reduces fuel economy. It's recommended to consult a professional shop for evaluation instead of modifying blindly. Comparisons with other models can serve as a reference—the Touran L has a medium height among MPVs, offering strong practicality.

Was this review help?
12
Share
Expand All
More Q&A

Which side is the steering wheel on in UK cars?

In UK cars, the steering wheel is on the right side because the traditional custom in the UK is to drive on the left. Traffic regulations stipulate that both vehicles and pedestrians must keep to the left, which is the opposite of right-hand traffic in our country. Under this driving rule, the driver's seat is designed on the right side for convenience and safety when getting in and out of the car, meaning the steering wheel is on the right. More information is as follows: Reason: Due to differences in traffic systems across countries, about 66% of countries in the world implement right-hand traffic, while 34% implement left-hand traffic. China's traffic system follows right-hand traffic, and to ensure sufficient visibility for observing road conditions, the driver's cabin is naturally designed on the left. Example: Early car cabins were in the middle. Mercedes-Benz, one of the world's earliest car companies, initially had the steering wheel in the center of the car. Later, based on ergonomic reasons—people being more accustomed to using their right hand—the driver's cabin was set on the right side, a design that continues to this day.
116
Share

Must the Written Test and Road Test Be Taken at the Same Location?

After passing the written test (Subject 1) for a driver's license, you can take the road test (Subject 2) in a different location. The public security authorities have introduced 10 new measures for the reform of "streamlining administration, delegating power, and improving government services" in traffic management, including "cross-regional handling" for 5 types of services such as driving tests and "quick and convenient handling" for 5 services including vehicle mortgage registration. These measures have been implemented since June 1, 2019. Below is an introduction to cross-regional handling: 1. Overview: Small vehicle driver's licenses have achieved "nationwide testing," allowing applicants to apply for a small vehicle driver's license anywhere in the country with just their resident ID card, without needing to submit proof of residence registration. Split-subject testing allows for cross-regional handling. If an applicant has passed some subjects of the small vehicle driver's license test and then changes their residence to another location due to work, study, or life reasons, they can apply to change the test location and continue taking the remaining subjects, reducing the burden of traveling back and forth for tests. 2. Test Process: After changing the test location, the applicant can directly schedule the remaining subjects at their current residence. Previously passed subjects remain valid. After passing all subjects, the driver's license can be obtained directly at the current test location.
116
Share

What are the differences between the 2015 and 2018 Alphard models?

The differences between the 2015 and 2018 Alphard models lie in the engine, transmission, and configurations. Different engines: The 2018 model's engine code is 2GR-FKS, while the 2015 model's engine code is 2GR-FE. The 2018 model's engine is equipped with hybrid injection technology, whereas the 2015 model's engine uses multi-point electronic fuel injection technology. The maximum horsepower and torque of the 2018 model's engine are generally higher than those of the 2015 model. Different transmissions: The 2015 model uses a 6-speed automatic transmission, while the facelifted 2018 model uses an 8-speed automatic transmission. Different configurations: The 2018 model has additional features compared to the 2015 model, including a 360-degree panoramic camera, rear cross-traffic alert, engine start-stop, a panoramic sunroof, leg rest adjustment, and front seat ventilation. The second-row seats in the 2018 model also offer more adjustment functions, supporting forward/backward adjustment, backrest adjustment, height adjustment, and leg rest adjustment.
103
Share

What is the inspection method for the PCV valve?

The inspection method for the PCV valve is as follows: 1. First method: Let the engine idle, remove the PCV valve from the cylinder cover hose, and check if the PCV valve is clogged. If you place your hand on the PCV valve interface, you can feel a strong vacuum suction. 2. Second method: After reinstalling the PCV valve, remove the crankcase intake pipe from the air filter, lightly cover the pipe opening with a thin piece of paper. When the pressure in the crankcase decreases (after about 1 minute), the thin paper should be noticeably sucked towards the pipe opening. Additionally, after stopping the engine, remove the PCV valve and shake it by hand to check. If you hear a "click" sound, it indicates that the PCV valve is flexible and usable.
101
Share

What is the difference between AT tires and MT tires?

MT tires are more suitable for off-road vehicles, with strong grip and off-road capabilities, while AT tires, also known as all-terrain tires, are suitable for use in many places. The following is a related introduction about AT tires and MT tires: 1. AT tires: The full name is All-terrain, which refers to all-terrain tires suitable for various road conditions, and is also the choice of most off-road enthusiasts. The characteristics of AT tires are that the tread pattern is more rugged compared to HT, and the spacing between the tread blocks is larger than HT, providing stronger grip on unpaved roads. 2. MT tires: MT tires are mud tires. This type of tire is specifically designed for off-road use, with exaggerated tread patterns and very strong grip. When driving in mud, they can quickly expel the mud from the tread gaps, making it easy to handle mountain and muddy roads. They are usually installed on off-road vehicles and are suitable for owners who like to take extreme off-road routes.
108
Share

What is the difference between 95V and 95W tires?

The difference between 95H and 95V tires lies in their speed ratings: the speed rating for H is 210 km/h, while for V it is 240 km/h. Here are the relevant details: 1. Speed Rating: The speed rating indicates the maximum speed a tire can sustain under specified load and inflation conditions. Common speed ratings for most vehicles on the market are H and V, while high-performance vehicles may use W and Y. 2. Meaning: The further the letter in the tire speed rating is in the alphabet, the better the tire's performance and the higher its price. Tires with different speed ratings are suitable for different applications. P-T rated tires (maximum speed 150-190 km/h) are suitable for small and compact cars, U-V rated tires (maximum speed 200-240 km/h) are suitable for mid-range to high-end sedans, while the highest-performance W-Z rated tires, capable of sustaining speeds between 240-300 km/h, are typically used in large luxury sedans and supercars.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.