···
Log in / Register

What is the minimum ground clearance of the Bestune T99s?

3Answers
LaLila
09/01/2025, 01:12:40 AM

The minimum ground clearance of the Bestune T99s is 192mm. The Bestune T99 features an open design for its headlights and front grille, combined with waistlines and a full-width taillight, creating a majestic appearance. Introduction to minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. Design considerations for minimum ground clearance: The design of minimum ground clearance must account for the passability of loading platforms during transportation and the possibility of avoiding scrapes when the car approaches ordinary curb edges. If sales are restricted to a specific country or region, local road quality conditions must also be considered.

Was this review help?
114
Share
LaJeffrey
05/09/2026, 06:52:56 AM

From an automotive enthusiast's perspective, let's talk about ground clearance. The Besturn T99s boasts a figure of 192mm, which directly impacts its off-road capability. Simply put, it's the height from the ground to the lowest point of the chassis. On smooth roads, this might not be noticeable, but when you hit rural gravel paths, that 192mm allows the car to easily avoid rocks and bumps, preventing damage to the engine guard. I'd recommend not overloading the vehicle and maintaining recommended tire pressure to avoid accidental reduction in clearance. I've also noticed some competitors in the same SUV class, like the Changan CS75 with 178mm - the Besturn's design proves more practical, clearly considering China's complex road conditions. In short, understanding this number helps us drive more safely.

Was this review help?
1
Share
Expand All
StLydia
05/11/2026, 12:01:58 AM

From an overall vehicle usage perspective, the Bestune T99s has a minimum ground clearance set at 192mm, which is quite considerate in configuration. Actual measurements closely match the official value, making it more than sufficient for navigating congested urban roads and easily handling speed bumps. Design factors such as tire diameter and suspension settings ensure stability under load. When compared to other SUVs like the Haval H6's 180mm or Geely Boyue's 190mm, the Bestune's 192mm is slightly higher, optimizing its passing performance. Regular maintenance of tire pressure is advised to prevent wear from affecting the clearance height.

Was this review help?
17
Share
Expand All
More Q&A

Will Scratched Paint Affect New Car Registration?

Scratched paint on a new car can affect its registration. If the new car hasn't been registered yet and the scratches are noticeable, altering the vehicle's appearance, it won't be eligible for registration. In such cases, the scratched areas must be repainted before the car can proceed with the registration process at the vehicle management office. Car paint is sprayed onto the vehicle, serving as a type of protective coating. It forms a protective film on the car's surface, shielding the body from corrosion and extending the vehicle's lifespan. Cars have high requirements for paint, demanding not only excellent mechanical properties but also strong resistance to scratches and long-lasting gloss.
117
Share

Which car brand has a nail-shaped logo?

The nail-shaped logo represents Tesla automobiles. Its models include the Model 3, Model S, Model X, among others. Taking the Model 3 as an example, it is a pure electric vehicle. For daily driving, simply charge it at home overnight, and it will be fully charged for the next day's travel. During long-distance driving, you can replenish the battery at public charging stations or Tesla's charging network. The Model 3 is equipped with two independent motors to enhance redundancy. Each motor has only one moving part, offering high durability and easy maintenance. The two motors can precisely distribute torque between the front and rear wheels, providing superior handling and traction control.
108
Share

Where is the OBD interface of BAIC Huansu S3 located?

The OBD interface of the BAIC Huansu S3 is located under the glove box on the passenger side. Adjust the passenger seat and lean in to see it. The car's OBD interface can be connected to a diagnostic computer to read the vehicle's fault codes. The BAIC Huansu S3 is positioned as a 7-seater compact SUV, equipped with a BJ415C engine that delivers a maximum power of 83kW and a maximum torque of 150Nm, paired with a 5-speed manual transmission. It features a front MacPherson independent suspension and a rear five-link suspension, and is available in four colors: Bordeaux Red, Amber Gold, Phantom Gray, and Egret White.
115
Share

What type of vehicle is the Orlando positioned as?

The Orlando is positioned as a compact car, equipped with a 1.3T turbocharged engine that delivers a maximum power of 120 kW and a peak torque of 230 Nm. In terms of the transmission system, the 1.3T turbocharged engine is paired with a 6-speed automatic manual transmission. The Orlando's body dimensions are 4684 mm in length, 1807 mm in width, and 1628 mm in height, with a wheelbase of 2796 mm. The Orlando features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension, and its body structure is a unibody design.
120
Share

Can scratches on car glass be repaired?

Scratches on car glass can be repaired. The repair methods are: small and shallow scratches can be treated with toothpaste. Applying toothpaste can repair minor scratches and prevent rust. First, wipe the area with a soft cloth, then rinse it with water to ensure there are no debris or impurities on the glass. Next, apply toothpaste to the glass and inspect the scratched area to check the effect until the scratches are no longer visible. Alternatively, you can use a glass scratch repair agent, which is only suitable for minor scratches. During the repair process, it is important to clean and wipe the area to be repaired thoroughly to avoid any residual impurities on the surface.
116
Share

What are the benefits of engine start-stop?

Engine start-stop benefits include energy conservation and emission reduction. When the engine start-stop function is activated, the engine enters a temporary dormant state, eliminating the issue of instantaneous fuel consumption and saving fuel. The working principle of the engine start-stop system is that when the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal, stops, and shifts into neutral, at which point the system automatically detects the conditions. Generally, the automatic start-stop technology is enabled by default after the ignition is turned on. If it needs to be turned off, a simple press of a button is sufficient. When in use, it is more convenient. During driving, as long as the brake pedal is pressed and the vehicle comes to a complete stop for two seconds, the engine will automatically shut off. If the brake remains pressed, the engine will stay off.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.