What is the method to reset the maintenance light on the Magotan?

1 Answers
Jeffrey
07/30/25 10:22am
Magotan maintenance light reset method is: 1. Turn off the vehicle key to make all instrument lights go out; 2. Press and hold the vehicle maintenance light reset button; 3. Turn on the vehicle key to make all instrument lights illuminate; 4. Continue holding the button for a moment to enter reset mode; 5. Release the maintenance reset button, then press button A within 20 seconds to complete the reset. Taking the 2020 Magotan as an example, its body dimensions are: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66l. The 2020 Magotan is equipped with a 1.4T turbocharged engine with maximum power of 110kW and maximum torque of 250Nm, matched with a 7-speed dual-clutch transmission.
Was this review help?
12
0
Share
More Forum Discussions

Can You Cover Your Car with a Car Cover on Rainy Days?

Whether you can cover your car with a car cover on rainy days depends on the intensity of the rain and the environment where the vehicle is parked. If the rain is light or the environment requires protection against acid rain, windblown sand, etc., then you should cover the car with a car cover. Scenarios where a car cover is unnecessary: Car covers are primarily used to protect against external elements such as windblown sand, acid rain, bird droppings, and fallen leaves. However, if the car is parked in an underground garage or on the roadside for no more than 10-20 days, and the surrounding environment has minimal windblown sand or dust, you may choose not to use a car cover. In such cases, the cover provides little protection against dust and windblown sand and may instead add inconvenience to the driver when using it. Disadvantages of using a car cover: Covering the car for extended periods can cause the car cover to rub against the paint due to environmental factors. For example, during strong winds, the cover may move continuously, leading to paint damage over time, which can turn yellow due to oxidation. Using a high-quality car cover with a soft inner lining can help minimize this issue. Additionally, covering the car during heavy snowfall may cause the cover and the car to freeze together, making it difficult for the driver to open the doors after the snow.
15
0
Share

What year is the car with the letter F?

The 10th character F in the VIN indicates the car was manufactured in 2015. Here is relevant information: 1. The Vehicle Identification Number serves as a car's ID card and cannot be wrong. You may consult the manufacturer for verification. Manufacturers who compile and mark VINs must register with the China Automotive Technology and Research Center Standardization Institute at least one month before first using the VIN, and can only use it after registration. 2. The following documents are required for registration: a copy of the "World Manufacturer Identifier" certificate approved by the Automotive Industry Division, vehicle type, the format and images of the marking containing the VIN, description and images of the VIN marking position or area, and an explanatory document for the VIN.
12
1
Share

Where is the ECO switch on the Buick Excelle?

The ECO switch button of the Buick Excelle is located at the bottom left of the driver's seat. ECO stands for the energy-saving driving mode. Taking the 2021 facelifted Buick Excelle as an example, its body dimensions are: length 4609mm, width 1798mm, height 1486mm, with a wheelbase of 2640mm and a fuel tank capacity of 44 liters. The 2021 facelifted Buick Excelle is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 6-speed automatic manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
2
1
Share

What Causes the Power Steering System Warning Light to Illuminate?

When the power steering system warning light illuminates, it may be due to a malfunction in the steering system sensor, steering gear, or power steering pump. Below is a detailed introduction to the automotive power steering system: 1. Function: It utilizes the power generated by an electric motor to assist the driver in steering. This system directly provides steering assistance through an electric power steering motor, eliminating the need for components such as the power steering oil pump, hoses, hydraulic fluid, drive belt, and engine-mounted pulley found in hydraulic power steering systems, thereby saving energy and protecting the environment. 2. Composition: The automotive power steering system can improve vehicle stability. When the vehicle shows signs of instability, the electronic power steering system can independently apply brakes to each wheel and coordinate with the engine management system to ensure driving safety. The automotive power steering system mainly consists of a vehicle speed sensor, reduction mechanism, torque sensor, electric motor, and electronic control unit.
10
4
Share

What Do N Gear and P Gear Mean?

P gear is the parking gear, and N gear is the neutral gear. Below is a detailed introduction to car gears: 1. P Gear (Parking Gear): When the gear lever is in the P gear position, the transmission is in neutral inside, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used for long-term parking. When engaging the P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, first apply the handbrake before engaging P gear. 2. R Gear (Reverse Gear): When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. 3. N Gear (Neutral Gear): When the gear lever is in the N gear position, the gears inside the transmission are in a freewheeling state, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking, such as waiting at a red light, or when the car is being towed. 4. D Gear (Drive Gear): When the gear lever is in the D gear position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, following preset shifting patterns. In most cases, D gear can be used for driving.
8
0
Share

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.