···
Log in / Register

Do You Need to Check Traffic Lights When Making a Right Turn?

1Answers
JoyFitz
08/25/2025, 10:50:35 PM

When making a right turn, drivers must observe traffic lights, which come in two types: circular traffic lights and arrow-shaped traffic lights. When turning right, if the traffic light is circular and there are no auxiliary signs prohibiting a right turn on red, drivers do not need to wait for the light to turn green to make the right turn. If the traffic light is arrow-shaped, drivers cannot turn right when the right-turn arrow is red. They must wait until the right-turn arrow turns green; otherwise, they may be penalized for running a red light. Legal Regulations: According to the Road Traffic Safety Law, the regulations regarding traffic lights are as follows: Article 25, Section 2 states that traffic signals include traffic lights, traffic signs, road markings, and the directions of traffic police. Article 26 specifies that traffic lights consist of red, green, and yellow lights. A red light indicates prohibition, a green light permits passage, and a yellow light serves as a warning. Article 38 requires vehicles and pedestrians to follow traffic signals. If a traffic officer is directing traffic on-site, their directions must be followed. On roads without traffic signals, passage should be made under the principles of safety and smooth traffic flow. Article 62 states that pedestrians crossing intersections or roads should use crosswalks or pedestrian facilities. At intersections with traffic lights, pedestrians must follow the signals. At intersections without traffic lights or crosswalks, or when crossing roads without pedestrian facilities, pedestrians should ensure safety before proceeding. Article 89 stipulates that pedestrians, passengers, or non-motor vehicle drivers violating road traffic laws and regulations may receive a warning or a fine ranging from 5 to 50 yuan. Non-motor vehicle drivers who refuse to pay the fine may have their vehicles impounded. Motor vehicle drivers who violate traffic light rules will receive 6 penalty points. Right-Turn Precautions: Observe oncoming straight-moving vehicles: When making a right turn, drivers must check both the right and left sides for approaching vehicles. Watch for left-turning vehicles from the opposite direction: In addition to checking for straight-moving vehicles, drivers should also look for left-turning vehicles from the opposite side. When turning right, yield to vehicles coming from the left, whether they are turning left or going straight. Be mindful of pedestrians: When turning right, drivers should watch for pedestrians not only at crosswalks before the intersection but also at crosswalks around the corner.

Was this review help?
104
Share
More Q&A

Does a new car need brake fluid replacement after three years of driving?

New cars require brake fluid replacement after three years of driving. However, the replacement timing should not be determined solely by the cycle but should also consider the moisture content of the brake fluid. When the moisture content exceeds 3%, replacement is necessary. If it exceeds 5%, immediate replacement is crucial as the boiling point of the brake fluid becomes very low at this stage, directly affecting the vehicle's braking performance. Brake fluid replacement method: First, ensure the vehicle is turned off and open the brake fluid reservoir cap. Use a syringe to extract all the old brake fluid, then fill the reservoir with new brake fluid; Locate the bleeder screw on the brake caliper, remove the dust cap from the bleeder port, attach a rubber tube to it, and connect the other end to a drain bottle; Begin pumping the brake pedal, paying attention to the color of the brake fluid in the rubber tube. If the color becomes significantly lighter, it indicates the fluid replacement is complete; Finally, stop pumping the brake pedal and reinstall the screw and dust cap.
105
Share

How to Replace the Key Fob Battery for the Teana?

First, prepare some tools, a screwdriver and a battery. Press the button on the back of the key fob to remove the mechanical key. Use the prepared "pry tool" to open the key, replace the battery, then reassemble the key. Introduction to the Teana: 1. Exterior: The front features an exaggerated V-shaped grille design paired with sharp LED headlights. The side profile adopts a floating roof design with smooth overall lines. The Teana's sunroof design allows drivers to maintain smooth breathing while driving while also offering a panoramic view of the outdoors. 2. Powertrain: The engine is a 2488cc DOHC 16-valve with dual CVTC (Continuous Variable Valve Timing Control), delivering a maximum power of 173ps at 6000rpm and maximum torque of 234Nm at 4000rpm. Transmission: XTRONIC CVT (Continuously Variable Transmission).
115
Share

Why Do Cars Experience Brake Failure?

Brake system lacks maintenance, with excessive impurities in the brake master cylinder. Vehicle overload leading to brake failure. Improper operation causing mechanical failure, such as prolonged downhill braking. Excessive free travel of the brake pedal or excessive clearance in the brake assembly, poor contact of brake shoe friction linings, severe wear or oil contamination. Additional relevant information is as follows: 1. Symptoms of automotive brake failure include excessive brake pedal travel, delayed braking response, significantly reduced or complete loss of braking effectiveness, and increased stopping distance. When pressing the brake pedal, it feels neither soft nor sinking, but braking performance remains poor - this indicates wheel brake assembly issues such as oil-contaminated brake shoes, poor contact, aged friction linings, excessive wear, or uneven brake drum wear. In such cases, the braking system's technical condition should be inspected and adjusted/repaired when necessary. 2. When experiencing brake failure on regular roads, maintain control of steering, shift the transmission into first gear while observing surroundings. If conditions permit, change lanes to avoid obstacles ahead. If lane changing isn't feasible, never force it. If first gear doesn't sufficiently reduce speed, repeatedly apply and release the parking brake to further decrease vehicle speed.
113
Share

How to Perform a Launch Control Start in a BMW M4 Automatic Transmission?

BMW M4 Automatic Transmission Launch Control Method is as follows: 1. Launch control consumes significantly more engine and transmission resources compared to normal driving, so many manufacturers impose limits on the number of launch control starts. Exceeding the specified number of launches that result in engine or transmission damage may void the warranty. Therefore, it's essential to warm up the car before attempting launch control. 2. Turn off the ESP, which in the BMW M4 means disabling the DSC. This allows the engine to output power freely. 3. Switch the transmission to manual mode to lock the gearbox in first gear. Utilizing the largest gear ratio of first gear maximizes the torque output from the engine, providing the strongest launch control torque. 4. Press the brake pedal all the way down. 5. Press the accelerator pedal all the way down. This KICK-DOWN action is like unlocking the vehicle's full potential. Keeping the accelerator fully depressed activates this mode, signaling to the vehicle that maximum power performance is required, thus enabling the launch control function. 6. Use the cruise control to adjust the RPM—up to increase and down to decrease—to control the maximum engine speed when the accelerator is fully pressed. The maximum torque RPM for gasoline engines is not at the highest RPM; it varies depending on the specific model. For this BMW M4, the maximum torque RPM is between 3000-3500, so set the cruise control to a maximum of 3500 RPM. 7. Release the brake immediately once the engine reaches the set maximum RPM, and the vehicle will 'zoom' forward.
110
Share

What is the function of the AC switch in a car?

The function of the car air conditioning AC button is to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to a better state. The AC button is the switch for the cold air conditioning. How to use the AC button: Start the car engine. When cooling is needed, press the AC button. The indicator light will turn on, indicating that the air compressor has started working. At the same time, adjust the temperature control knob to the blue zone, which is the cooling zone. Turn on the car blower and adjust the airflow to your desired level. The car will then start cooling, and cold air will gradually come out of the vents. During the cooling process, to ensure good cooling performance, it is advisable to set the air circulation to the internal air circulation mode. After turning on the air conditioning, you can adjust the airflow according to your needs while driving. Activating the AC button can also quickly remove frost or fog from the front windshield, helping the driver see the road ahead clearly. In rainy or foggy weather, turning on the cooling defrost function is very effective. When heating in winter, it is best not to turn on the AC button. Instead, adjust the temperature control knob to the red zone and turn on the blower. The heat generated by the engine is usually sufficient for heating. Precautions when using the AC button: Turning on the AC button will increase fuel consumption and reduce engine power. After turning on the air conditioning for cooling, it is advisable to open the windows for ventilation every 20 minutes.
110
Share

What is the average fuel consumption of the Cadillac CT6?

The Cadillac CT6 has a fuel consumption of 7.1L per 100 kilometers, which is the official data. The fuel tank capacity of the Cadillac CT6 is 72L, and the distance it can travel on a full tank is 72/7.1*100=1014km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.