What is the method to remove the speed limit on Luyuan Midou?

What does the wrench indicator light on the car dashboard mean?

The wrench indicator light on the car dashboard means: The car has reached the maintenance interval and it's time to go to the 4S shop for maintenance. After maintenance, this indicator will disappear. If the "small wrench" still appears after normal vehicle maintenance, you can manually eliminate the "small wrench" indicator by following these steps: 1. Insert the key, but do not turn it. 2. Hold down the operating rod next to the odometer for 5-10 seconds, then turn on the power. 3. After another 5-10 seconds, start the car. Keep holding the operating rod throughout this process without releasing it. Generally, following the above steps will clear the small wrench indicator. If it doesn't clear, repeat the same process a few more times.

107

Share

How Often Should the Air Filter and Fuel Filter in a Car Be Replaced?

The car's air filter is generally replaced every six months. The car's fuel filter is typically replaced every 10,000 kilometers or every six months. Here is some additional information about air filters and fuel filters: 1. The air filter ensures that when the car's air conditioning is turned on, it filters out air impurities entering the system. If not replaced for a long time, odors and mold can enter the car. 2. The main function of the fuel filter is to block dust and particles that the engine inhales during the intake process. If the filter is not cleaned or replaced for a long time, it cannot keep dust and foreign objects out. If the incoming air contains too many impurities or is insufficient, it will affect combustion efficiency, leading to issues such as engine carbon buildup.

114

Share

How to Determine Insufficient Coolant?

Determining insufficient coolant can be done through the following steps: 1. Press the one-touch start button to initiate the vehicle, and the system will perform a self-check. 2. Check the vehicle dashboard. There will be fluid level indicators; abnormal levels will be flagged, allowing you to assess the coolant level. 3. Locate and pull the engine hood release handle from the driver's seat inside the vehicle. 4. Find the latch under the hood, open it, and secure the hood in place. 5. Inspect the coolant reservoir, which is marked with maximum and minimum level indicators. Coolant, fully known as antifreeze coolant, is a fluid with antifreeze properties designed to prevent the coolant from freezing in cold weather, which could otherwise cause the radiator to burst or damage the engine cylinder block.

111

Share

What Causes the Engine to Stall While Driving?

The main reasons for the engine suddenly stalling while driving are as follows: 1. Fuel system failure. This includes fuel pipe rupture, fuel pump failure, fuel exhaustion, or clogged fuel inlet. 2. Electrical circuit failure. A short circuit in the low-voltage circuit causing power interruption, issues with the ignition switch, starter malfunctions, or blown fuses in the fuse box. 3. Ignition component failure. Faulty ignition coils, ignition modules, or spark plugs can cause the engine to start but stall after a while, then restart and stall again. 4. Misalignment or breakage of the engine belt. Over time, belts can age and loosen, leading to breakage or misalignment that causes the engine to stall. 5. Lack of driving skill. Automatic transmission cars generally do not stall, but manual transmission models require proper clutch and throttle coordination. Sometimes, if the car speed drops and the driver does not downshift, staying in a high gear instead of shifting to a lower one, the car may stall.

105

Share

What are the reasons for a broken differential?

The differential may break due to the following reasons: 1. Improper operation of the differential lock by the driver, failing to disengage the differential lock in time when the vehicle exits rough terrain, leading to damage. 2. Oil level below the normal value, the driver failing to monitor the oil level in time, resulting in insufficient lubrication and subsequent differential damage. 3. Improper bearing clearance, where excessive bearing clearance during assembly causes axis deflection, while insufficient clearance leads to surface burning, pitting, and layer peeling of the rollers. The functions of the differential are: 1. To transmit the engine torque from the universal drive through the main reducer, differential, and half-shaft to the driving wheels, achieving speed reduction and torque increase. 2. To change the direction of torque transmission through the bevel gear pair of the main reducer. 3. To enable differential action between the two wheels through the differential, ensuring that the inner and outer wheels turn at different speeds.

108

Share

Can an automatic transmission car be shifted into neutral while driving?

An automatic transmission car cannot be shifted into neutral while driving. Forcing such a shift can lead to the following two adverse consequences: First: Accelerated transmission wear. Second: Reduced transmission lifespan. Below is some additional information about automatic transmissions: 1. An automatic transmission, as opposed to a manual transmission, eliminates the need for the driver to manually shift gears based on speed and road conditions. The vehicle automatically selects the appropriate gear according to driving speed and traffic conditions. 2. Never shift the gear lever into the N (neutral) position while driving, as the internal components of the automatic transmission require lubrication. When the gear is placed in N while driving, the oil pump cannot properly supply lubrication, causing the internal parts of the transmission to overheat and sustain damage. After the vehicle comes to a stop, the gear lever should be placed in N or P (park) position.

112

Share