What is the maximum range of Li Auto vehicles?

2 Answers
Brian
07/25/25 2:13am
Li Auto vehicles can achieve a maximum range of over 800 km under comprehensive driving conditions, with the actual range typically being around 700-750 km. Below is relevant information about Li Auto vehicles: 1. Extended-range mode: In this mode, Li Auto vehicles exhibit urban fuel consumption below 5L/100km and highway fuel consumption below 10L/100km. Equipped with a 45L fuel tank using 95-octane gasoline, the highway range is approximately 650 km due to higher fuel consumption at high speeds. 2. Charging time: With DC fast charging (60kW), it takes 30 minutes to charge from 20% to 80%, while AC slow charging (7kW) requires 6 hours for a full charge from 0% to 100%. For quicker refueling, direct gasoline filling remains the faster option. Note that allowing the battery to fully deplete in actual usage can cause damage. Li Auto utilizes ternary lithium-ion batteries supplied by CATL, with a total capacity of 40.5kWh. The power battery warranty covers 8 years or 120,000 km.
Was this review help?
15
3
Share
LePeter
08/10/25 4:28pm
I've been driving my Li Auto for almost two years and have a deep understanding of its maximum range. Official data shows it can reach around 1,100 kilometers, thanks to the extended-range system. After the pure electric part runs about 200 kilometers, it switches to the generator for charging, saving fuel and providing peace of mind. In practical use, I can drive from Beijing to Shanghai on a full tank without charging, which is super convenient. For daily commutes, I use pure electric mode, costing just a few cents per kilometer, significantly reducing my monthly bills. However, it's important to note that driving fast on highways or blasting the air conditioning can reduce the range, but good temperature control can help mitigate this. Overall, this design avoids the range anxiety of pure electric vehicles, making it a practical companion for family trips, easily adding hundreds of kilometers to your journey.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What is the model of the Vizi low beam bulb?

Vizi low beam bulb model: H1. When to use low beam: You need to turn on the low beam when driving in dark areas without street lights, during dusk when it's getting dark, or at dawn when the light is dim. If you encounter heavy fog, snow, or heavy rain that obstructs visibility, you should also turn on the low beam even during the day. In some areas where the lighting is insufficient, the low beam should also be used. Notes: When driving at night on flat roads with good visibility, you can drive slightly faster and use the high beam. If the road is uneven or the traffic situation is complex, you should reduce your speed. When turning at night, reduce your speed in advance, continuously switch your lights, and use the low beam when approaching the turn, along with the turn signal, keeping to the right.
14
4
Share

What is the reason for the high engine speed but inability to accelerate in a Mercedes-Benz C-Class?

The reasons for the high engine speed but inability to accelerate in a Mercedes-Benz C-Class include: insufficient oil pressure, poor oil pump performance, clogged fuel filter or injectors; partial blockage in the exhaust system; electrical circuit open or short circuits, poor conductivity, etc. Solution: Check the hydraulic fluid level in the transmission. If the level is too low or too high, adjust it accordingly, then observe if the transmission still slips. If slipping persists, inspect the quality of the hydraulic fluid. If the fluid appears dark brown or has a burnt smell, it indicates that the friction plates of the clutch or brake, or the brake band, are burnt. In this case, the transmission needs to be disassembled and repaired. Precautions: If the engine speed suddenly increases when the automatic transmission shifts to a certain gear, but the vehicle speed does not increase accordingly, it indicates slipping in that gear. The easier it is for the engine speed to rise during slipping, the more severe the slipping is.
15
4
Share

Can the Passat side skirts be replaced with new ones?

The Passat side skirts can be replaced with new ones. They can also be repaired. It is recommended not to replace them if possible, as repairing is preferable. Replacement involves cutting the vehicle, which can significantly depreciate its value when selling. Car Side Skirts: These are the skirt panels installed on both sides of the vehicle body. When the car is driving at high speeds, they can reduce air resistance, functioning similarly to an air dam by minimizing airflow entering the underside of the car. They also provide some aerodynamic effects, significantly reducing air resistance under certain conditions. Materials of Car Side Skirts: Generally, they can be categorized into three types: steel plate integrated stamping, engineering plastic, and aluminum alloy integrated stamping. Among these, steel plate integrated stamping and aluminum alloy integrated stamping cannot be detached separately and require sheet metal cutting since they are integrated with the vehicle body. On the other hand, engineering plastic side skirts can be detached individually, as they are mainly connected to the vehicle body via screws and clips, making them detachable. The specific material used depends on the vehicle model.
16
5
Share

What is the wheelbase of the Bora?

The distance between the center lines of the left and right rear wheels of the Bora is 1525mm. Introduction to Wheelbase: Wheelbase refers to the distance between the center lines of the wheel tracks left by the wheels on the vehicle's support plane (generally the ground). If the axle has dual wheels at both ends, the wheelbase is the distance between the center planes of the dual wheels. Generally speaking, the wider the wheelbase, the higher the driving comfort. Function of Wheelbase: Generally, a wider wheelbase provides higher driving comfort and better stability. When the vehicle tilts laterally, the outer wheels can provide better support. The vehicle's roll angle in corners is smaller, and the limit of the outer wheels appears later. However, some domestic cars lack power steering, and if the front wheelbase is too wide, the steering wheel may feel very "heavy," affecting driving comfort. Additionally, wheelbase also affects the vehicle's overall width, weight, and safety.
3
2
Share

What Causes the Abnormal Noise in Corolla Hybrid?

Reasons for abnormal noise in Corolla Hybrid: Long-term parking of the vehicle: Engine oil flows back to the oil pan, and the oil pump cannot immediately establish oil pressure during a cold start, especially in the upper part of the engine. The valves do not receive sufficient lubrication, and the hydraulic lifters and mechanical rocker arms fail to operate properly, leading to abnormal noise; High engine oil viscosity: Excessive engine oil viscosity results in insufficient lubrication during engine operation, causing friction and abnormal noise; Aging of engine belt groups: Aging of engine belt groups or issues with the tensioner causing overly loose belts can lead to friction noise, belt slippage, etc.
9
2
Share

What is the size of the Huansu S3 audio speaker?

BAIC Huansu S3 speaker size is: 6.5 inches. When playing a CD or MP3 on the Huansu S3 audio system, adjusting the front and rear loudness to front 10 and weakening the two rear mixers will make the high tones immediately noticeable. Speaker: A speaker is the audio signal device of a car. During driving, the driver can emit necessary audio signals as needed and according to regulations to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. It is also used to urge movement and transmit signals. How the speaker works: An automotive electric horn produces sound through the vibration of a metal diaphragm. The automotive electric horn consists of an iron core, magnetic coil, contacts, armature, diaphragm, etc. When the driver presses the horn switch, current flows through the contacts to the coil, generating magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature disconnects the contacts, interrupting the current and causing the coil's magnetic force to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the spring's force, closing the contacts and reconnecting the circuit. Current then flows through the contacts to the coil again, generating magnetic force and repeating the above process. This cycle continues, causing the diaphragm to vibrate continuously and produce sound.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.