What is the license plate code for Weifang?

Does Wheel Repair Affect the Wheel?

Generally speaking, wheel repair has almost no impact on the wheel, but the severity of the wheel's deformation should be considered. Below is an introduction to wheel damage: 1. Surface scratches on the wheel: Surface scratches are probably the most common type of damage. If the surface scratches are not severe, they can be ignored. However, if the scratches are deep, it is recommended to repair them promptly. This is because wheels are coated with a protective clear lacquer when manufactured to prevent oxidation of the aluminum alloy material. If the surface scratches are severe, this protective layer will likely be worn off, allowing oxygen in the air to react with the aluminum in the alloy, leading to oxidation. 2. Edge scratches or chips on the wheel: The causes of edge scratches or chips are similar to those of surface scratches. If there are chips or severe scratches, prompt repair is advised. Severe edge scratches without the protection of clear lacquer can lead to corrosion of the wheel edge, resulting in a loose fit between the wheel and tire, which may cause slow air leakage. Similarly, edge chips can also lead to a loose fit and slow air leakage. 3. Surface corrosion of the wheel: Corrosion on the wheel is also related to the surface treatment process. Generally, wheels with a water electroplating finish are most prone to corrosion, often starting from the inside. If not severe, this corrosion may not be visible on the surface initially. Over time, however, the corrosion will become visible from the inside out, and in severe cases, the electroplated layer may peel off.

113

Share

What is the Tire Code?

The tire code is a set of numbers or letters marked on the sidewall of a tire, indicating its type and specifications, primarily displaying the tire's basic performance. Here is an introduction to the meanings of the tire specification numbers: 1. Tire Width: The wider the tire, the larger the contact area with the ground. This increases the friction between the tire and the road during driving, which can negatively impact fuel consumption. However, increased friction also enhances wet grip performance and improves water drainage, thereby boosting driving safety in rainy conditions. 2. Aspect Ratio: The aspect ratio is the percentage of the tire's cross-section height divided by its width. A higher value means a thicker tire, resulting in lower maneuverability but increased comfort. Generally, standard passenger cars should not use tires with an aspect ratio greater than 75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio below 60%. 3. Letters R and H: In tire specifications, you may notice two letters alongside the numbers. The letter R stands for the tire type, indicating a radial tire, while H represents the speed rating. The speed rating denotes the maximum speed the tire can handle under specified conditions with a given load.

115

Share

What is required for the replacement of a vehicle license?

The documents required for replacing a vehicle license include: Application Form for Replacement of Motor Vehicle License Plates/Certificates, original and photocopy of the vehicle owner's ID, original and duplicate of the motor vehicle driving license, three one-inch digital color photos of the driver with white background, and the driver's physical condition certificate. The timeframe for replacing a vehicle license: It must be done within three months in advance, i.e., within 90 days before the motor vehicle inspection. For vehicles not exempt from inspection, the owner needs to bring a letter of authorization, the vehicle license, and the compulsory traffic insurance policy to the local motor vehicle inspection station for inspection. Upon passing the inspection, it is no longer necessary to apply for an inspection compliance mark; it can be directly noted on the supplementary page of the vehicle license. For vehicles exempt from inspection within six years, the traffic management department does not need to inspect the vehicle but only needs to review the inspection application form, vehicle license, compulsory traffic insurance certificate, and vehicle and vessel tax certificate. The regulatory authorities will also check the vehicle's violation records. Upon passing the inspection, an inspection mark will be issued and noted on the supplementary page of the vehicle license.

114

Share

How to Replace the Air Conditioning Filter in a Reiz?

The steps to replace the air conditioning filter in a Reiz are: 1. Open the glove compartment on the passenger side; 2. Remove the clips next to the glove compartment; 3. Use both hands to squeeze the sides of the glove compartment inward and then remove it; 4. After removing the glove compartment, you will see the cover of the air conditioning filter; 5. Take off the cover and remove the old air conditioning filter; 6. Install the new air conditioning filter in the original position and manner; 7. Press the new air conditioning filter firmly into place; 8. Reinstall the cover of the air conditioning filter. The Reiz is the domestic name for the Japanese Toyota MARKX model. Its body surface is glossy, vibrant, and full, breaking through the traditional concept of vehicles in its class and creating a futuristic and captivating exterior design.

111

Share

What to Do About Fuel Tank Noise in Geely Xingrui?

If this situation occurs, it is necessary to visit a 4S shop for inspection by professional technicians. If the fuel tank is damaged within the warranty period, it can be replaced with a new one free of charge. More information about Xingrui is as follows: 1. Body Dimensions: The Xingrui is a compact sedan under Geely, with a length, width, and height of 4785 mm, 1869 mm, and 1469 mm respectively, and a wheelbase of 2800 mm. 2. Engine: The Xingrui is equipped with a 2.0-liter turbocharged four-cylinder engine, with a maximum power of 140 kW at 4700 rpm and a maximum torque of 300 Nm between 1400 and 4000 rpm. This engine is paired with a 7-speed dual-clutch transmission. 3. Configuration: The Xingrui features a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link independent suspension enhances the car's handling and ride comfort. This type of suspension is an improvement over the double-wishbone suspension, where the two wishbones are replaced with separate links.

105

Share

Which transmission is matched with the Volkswagen Lavida?

Volkswagen Lavida is equipped with the following transmissions: 1. The 1.6 and 2.0 models are matched with a 5-speed manual and a 6-speed automatic manual transmission; 2. The 1.4T model is matched with a TSI dual-clutch transmission. The body dimensions of the Volkswagen Lavida are 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. The Volkswagen Lavida is a sedan produced by Shanghai Volkswagen, featuring a sharp waistline design while retaining a side profile similar to the Octavia. This design facilitates easy access for rear passengers, and the 2610mm wheelbase ensures comfortable rear seating space.

113

Share