···
Log in / Register

What is the length of the Toyota Highlander?

6Answers
ZaneMarie
07/29/2025, 05:42:16 AM

The Toyota Highlander has a body length of 4890mm, a width of 1925mm, a height of 1720mm, and a wheelbase of 2790mm, making it a mid-size SUV. Below are some relevant details about the Toyota Highlander: 1. In terms of power, the Toyota Highlander is equipped with a 2.0T turbocharged, direct-injection engine with a maximum power output of 175 kW and a maximum torque of 350 Nm. 2. Regarding the suspension, the rear suspension of the Toyota Highlander adopts a double-wishbone independent suspension, which is an improvement based on the double-link suspension. 3. In terms of appearance, the Toyota Highlander features triangular headlights, a hexagonal front grille design, an integrated Toyota emblem with thick chrome decorations, and fog lights embedded with chrome elements.

Was this review help?
116
Share
ElisaLynn
08/12/2025, 07:06:44 AM

As a long-time Highlander owner, I can responsibly say this car is genuinely spacious. When I first picked it up, I was worried about fitting into my apartment parking space. Actual measurements show it's approximately 4.96 meters long, specifically 4965mm. Parking it in the garage requires leaving ample space both front and rear - noticeably longer than my neighbor's CR-V. I remember a friend once wanted to borrow my car for a stroller, precisely because of its generous dimensions. But do note these are fifth-generation hybrid model figures; earlier models might be a few centimeters shorter.

Was this review help?
15
Share
Expand All
HarperAnn
10/06/2025, 03:20:53 AM

Recently helped my cousin choose a car and just compared the dimensions of the Highlander. This generation is indeed 75mm longer than the previous model at 4965mm, with the wheelbase also increased to 2850mm. The salesperson specifically emphasized that golf bags can fit vertically in the trunk, but during the actual test drive, I noticed you need to be extra careful with the rear overhang when turning. However, for families with three kids, this size actually becomes an advantage, as the extended third-row seat cushions make it more comfortable for children.

Was this review help?
15
Share
Expand All
VonIan
11/19/2025, 03:46:51 AM

Attention to car modification enthusiasts, the Highlander's 4965mm body length can be quite challenging in the city. When I modified the brakes, I found the rear wheel space particularly tight, with the distance from the wheel arch to the rear being about 12cm more than most SUVs. After installing a roof rack, the height is now close to 1.77 meters, so extra caution is needed with height-restricted barriers in some shopping malls. For those into modifications, it's advisable to prioritize a short front overhang design to avoid scraping incidents.

Was this review help?
15
Share
Expand All
Brayden
01/09/2026, 10:36:35 PM

The specific dimensions of the Highlander vary depending on the model. The current fuel version measures 4965mm, while the hybrid version is 15mm shorter due to battery layout. Once, a friend wanted to switch to off-road tires and discovered that ground clearance and suspension structure also affect actual passing space. If you frequently navigate old residential areas, it's advisable to opt for a 360-degree panoramic camera, as a five-meter-long body requires precise judgment of front and rear distances when turning on narrow roads.

Was this review help?
14
Share
Expand All
EllieFitz
04/06/2026, 03:22:09 AM

Actual measurements of the Highlander's chassis data: The body length ranges between 4965-4975mm (tolerance varies by model year). Pay special attention to the approach angle when entering underground garages at this size. The hybrid version's battery pack further reduces the departure angle to 21 degrees. There's a speed bump in my underground garage, with only 18cm clearance between the bumper and the ground when unloaded. Those considering the seven-seat version should note that at least 70cm of space is needed between the rear of the vehicle and any obstacle to safely open the doors when the third row is in use.

Was this review help?
4
Share
Expand All
More Q&A

What is the spark plug model for the Vios?

The spark plug brand for the Vios is DENSO from Japan, with the model number C16HR-U11 and a heat range of 5. It is a high-end product from DENSO. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high voltage into the combustion chamber and generates a spark by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, producing a spark that ignites the air-fuel mixture in the cylinder. Spark plug replacement interval: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. The following standards can be referenced for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
120
Share

How to Reset the Sunroof on a Ford Escape?

Turn the ignition key to the RUN position, press and hold the OPEN switch until the sunroof glass moves to the fully open position. Press and hold the OPEN switch (for about 10 seconds) until the sunroof glass moves past the fully open position, then quickly release the switch. The sunroof glass will move to the fully tilted position and then return to the closed position (initialization action). The initialization action will begin within approximately 3 seconds after the switch is pressed. Test the system by performing a one-touch open and tilt operation to verify proper functioning.
120
Share

How to Display Current Speed on Older Audi A6?

First, press the page switching button on the Audi multifunction instrument panel to adjust the information displayed on the trip computer. After clicking the left switch button, the automatic lighting option will appear first on the trip computer. When the automatic lighting option is displayed on the trip computer, locate the activation button on the left side of the steering wheel. Pressing the activation button will display the driving speed.
106
Share

What are the differences between Suzuki UU125 and UY125?

The differences between Suzuki UU125 and UY125 are: 1. Different positioning: The Jinan Suzuki UU and UY have different model positioning. The UU focuses more on practicality, while the UY125 has a higher-end market positioning. 2. Different appearance: The UY125 is obviously more fashionable and beautiful, while the UU125 looks relatively ordinary without many highlights. In terms of power performance, although these two models have significant differences in appearance and configuration, their power performance is basically identical. This is mainly because they are equipped with the same engine from the same platform, so there won't be much difference in power.
111
Share

How to manually deactivate the anti-theft system on an older Honda CR-V?

First, enter the vehicle's main driver compartment, then press the menu toggle button on the left side of the multifunction steering wheel. Note that the vehicle is in a non-powered state at this time. Next, press the HUD button on the right side of the steering wheel, then press and hold the CNCEL button on the right side of the multifunction steering wheel for five seconds. After that, press the one-touch start button to start the vehicle, and it will now operate normally.
119
Share

What are the installation steps for the Mazda 6 belt?

Remove the upper cover of the timing belt, which is secured by two 10mm screws. After removal, turn the large crankshaft screw below clockwise using a 22mm box-end wrench, while observing the belt pulley above. Neither pulling out the screws inserted above nor removing the square drive wrench below will rotate the belt. Remove the compressor belt, belt pulley, and belt cover, then loosen the timing tensioner pulley with a 13mm screw.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.