What is the instruction for starting the GS8 with the key?

[McKathryn]

To start the GS8 with the remote key, first press the lock button, then press and hold the button with the arrow mark on the key. The GS8 key button instructions are as follows: Lock button: Press this button once within the effective range to lock all doors; if you keep pressing the button for 2 seconds after pressing it, the four-door windows will automatically close; if you keep pressing the button for 3 seconds after pressing it, the sunroof will automatically close. During the automatic closing of the windows or sunroof, releasing the button will stop the closing process. Unlock button: Press this button once within the effective range to unlock all doors; if you keep pressing the button for 2 seconds after pressing it, the four-door windows will automatically open; if you keep pressing the button for 3 seconds after pressing it, the sunroof will automatically open (applicable to certain models). During the automatic opening of the windows or sunroof, releasing the button will stop the opening process. Anti-theft alarm button: Press this button for more than 3 seconds to sound the anti-theft alarm, and the turn signals will flash for 30 seconds. Press the unlock button or anti-theft alarm button briefly to stop the anti-theft alarm. Trunk button: Within the effective range, press and hold ( ≥ 2 seconds) this button to unlock the hatchback door. For models equipped with an electric hatchback door, briefly press this button during the electric opening process to pause the hatchback door opening.

[AliviaFitz]

I've been driving the GS8 for several years, and the key start is actually quite handy—it's a keyless entry and start system. Every day when I approach the car door with the key, it automatically senses and unlocks. Once inside, just press the start button next to the dashboard while firmly pressing the brake pedal, and the engine starts. If you don't press the brake, pressing the button only activates the power mode, allowing you to listen to the radio without the car moving. In case the key battery is low or the sensor fails, remember that the spare key can unlock the car mechanically; to start the engine, just hold the key near the button or insert it temporarily. It's advisable to regularly check the key battery life to avoid awkward situations when out. Additionally, the remote start feature after locking the car is very practical—it allows you to preheat the car or turn on the air conditioning without even entering the vehicle.

[DePeter]

As a new driver, I was a bit confused when I first started using the GS8 key, but found it quite simple once I got the hang of it. You need to keep the smart key on your person or in your bag, and the car door will automatically unlock as you approach; after sitting down, make sure to firmly press the brake pedal and hold it, then press the round button on the center console to start the car. Pressing the brake is crucial—otherwise, pressing the button will only power the dashboard without starting the engine. If the key responds slowly, check if it's near electronic devices that might cause interference; if the battery is dead, simply replace it, and the dashboard will display a reminder. For daily maintenance, avoid getting the key wet or exposing it to direct sunlight to protect the battery.

[EmilioDella]

I prefer high-tech cars, and the GS8's smart key system is a highlight. It operates via radio frequency identification: when the key is near, the sensor unlocks the vehicle; stepping on the brake and pressing the start button inside the car ignites the engine. The operation requires just two steps: braking and pressing the button, eliminating the hassle of inserting a key. The design also includes an energy-saving mode where the key goes into sleep mode when not in use to extend its lifespan; after starting, the dashboard displays the key's status. If issues like failure to start occur, it might be due to the key being too far away or signal interference, which can be resolved by adjusting the key's position closer to the button.

[VanAlan]

Using the GS8 key to start the vehicle, safety comes first. Ensure the key is on your person, and the vehicle senses it before boarding; sit firmly, press the brake pedal completely, then press the start button for a smooth start. Ignoring the brake will only power the electronics without starting the engine, increasing battery load. The key battery should be checked and replaced approximately every two years to prevent unexpected issues; the start button automatically locks after leaving the vehicle to prevent accidental presses. Also, ensure the vehicle is parked on level ground and in neutral to avoid the risk of rolling when starting.

[LaDaniel]

I've experienced common issues with the GS8 key start and would like to share some tips. Keep the key in your pocket and approach the door for easy unlocking. Once inside, press the brake pedal and lightly tap the start button to ignite the engine. If you accidentally only power on the electronics, don't worry—just press the brake and start again. When the key battery is running low, the dashboard will display a warning light; replace the battery promptly or use the mechanical backup. Always confirm the engine is off after locking the car to avoid accidents.