How to Replace the Rear Brake Pads of Honda XR-V?

How to Remove the Undercarriage Spare Tire on a Prado?

Open the driver's side door of the FAW Toyota Prado; Engage the handbrake of the FAW Toyota Prado to prevent the vehicle from rolling; Pull the trunk switch located on the left side of the driver's leg area in the FAW Toyota Prado, then lift the trunk open; Lift up the bottom cover panel of the FAW Toyota Prado's trunk; After lifting the bottom cover panel of the FAW Toyota Prado's trunk, the spare tire will be visible and can be directly removed.

104

Share

How to use the dash cam in Mercedes-Benz A200?

Long press the power button to turn it on while the vehicle is powered. The DVR will automatically power on, and it will shut down with a 5-second delay when the charger is disconnected. In recording mode, the DVR will automatically enter the recording state upon startup, with the recording indicator symbol flashing. Press the OK button to stop during recording.

114

Share

What is the difference between the Lamando and the Lamando GTS?

The differences between the Lamando and the Lamando GTS lie in their appearance and configurations. Below is a detailed introduction to the differences between the Lamando and the Lamando GTS: 1. Different Appearance: The dimensions of the Volkswagen Lamando are 4615×1826×1425mm (L×W×H). The Lamando GTS measures 4610×1816×1425mm. The tire specification for the Volkswagen Lamando is 205/60R16, while the Lamando GTS uses 225/45R18 tires. The wheelbase of the Volkswagen Lamando is 2656mm, whereas the Lamando GTS has a wheelbase of 2646mm. 2. Different Configurations: The Lamando GTS is equipped with the EA888 third-generation 2.0TSI engine, delivering a maximum power of 162kW and a maximum torque of 350Nm, providing stronger performance. Additionally, the Lamando GTS comes with DCC adaptive chassis, XDS electronic differential lock, and a new ESP body dynamic electronic stability system, among other features. The Lamando GTS surpasses the Lamando in terms of configurations.

116

Share

What does China VI mean?

China VI refers to the China 6 emission standard. Below are the relevant details: 1. It mainly pertains to the emission standards for vehicle exhaust. China began implementing the China 6 emission standard on July 1, 2019. The China 6 emission standard increases the exhaust emission requirements by 50% compared to the China 5 standard. 2. The China 6 emission standard is divided into China 6a and China 6b. According to national regulations, starting from July 1, 2020, all light-duty vehicles sold and registered must meet the China 6a emission limits. From July 1, 2023, all light-duty vehicles sold and registered must comply with the China 6b emission limits. 3. The China 6 emission standard is more aligned with China's actual national conditions. The China 6b standard reduces carbon monoxide emissions by half compared to the China 5 standard, and the standard for carbon oxides is also reduced by approximately half. The early implementation of the China 6 standard is also very beneficial for improving China's environment.

107

Share

Why is the fuel gauge needle not moving?

Fuel gauge needle not moving is a minor issue, and the likely causes of the fault are the fuel float (fuel level sensor) or the fuel gauge circuit. Since these components are mostly located inside the car, professional repair shops are required for maintenance. Below are the detailed explanations: 1. Fuel float failure: The fuel float is also known as the fuel level sensor. Check whether the fuel level sensor plug on the fuel tank is loose, oxidized, or burnt, and observe if there is any sticking during the sliding process of the fuel level sensor. 2. Fuel gauge circuit failure: If there is a problem with the fuel gauge circuit on the dashboard, it is necessary to remove the dashboard and use a multimeter and a pin to locate and test the corresponding fuel gauge circuit on the dashboard.

113

Share

What are the differences between Subject 1 and Subject 4 in the driver's license test?

The main differences between Subject 1 and Subject 4 are: number of questions, question types, content distribution, and examination focus. The basis comes from the "Regulations on the Application and Use of Motor Vehicle Driving Licenses". Number of questions: The most obvious difference between Subject 1 and Subject 4 is the number of test questions. Subject 1 has 100 questions, while Subject 4 only has 50 questions; Subject 1 automatically submits the test when more than 10 questions are answered incorrectly, while Subject 4 automatically submits when more than 6 questions are answered incorrectly. Question types: Subject 1 consists of 100 questions, each worth 1 point, with a total test time of 45 minutes. The question types are true/false and single-choice questions, with a full score of 100 points. Subject 4 consists of 50 questions, each worth 2 points, with a test time of 45 minutes. The questions are mainly in the form of cases, pictures, animations, etc., and the question types are true/false, single-choice, and multiple-choice questions, with a full score of 100 points. Examination focus: Subject 1 mainly tests basic knowledge of road driving, while Subject 4 mainly tests safe and civilized driving knowledge. It can be understood this way: Subject 1 tests how to drive, while Subject 4 tests how to drive safely. Although the difference is only two words (safety), the focus is completely different. Content distribution: Subject 1 test content composition: driving license and motor vehicle management regulations account for 20%; road traffic conditions and regulations account for 25%; road traffic safety violations and penalties account for 25%; road traffic accident handling regulations account for 10%; basic knowledge of motor vehicles accounts for 10%; local regulations account for 10%. Subject 4 test content composition: safe driving knowledge accounts for 20%; civilized driving knowledge accounts for 18%; comprehensive application of road traffic signals in traffic scenarios accounts for 8%; safe driving knowledge under adverse weather and complex road conditions accounts for 16%; emergency avoidance knowledge accounts for 12%; typical accident case analysis accounts for 6%; traffic accident rescue and common hazardous chemical handling knowledge accounts for 10%; local test questions account for 10%. There is no limit to the number of attempts for Subject 1 and Subject 4 in the driver's license test. If the test is failed, it can be rescheduled. Each scheduled test has two attempts. If both attempts are failed, only a retake is required until the test is passed. Both Subject 1 and Subject 4 are theoretical tests and are part of the motor vehicle driver's license assessment. The driver's license test consists of 3 subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. In the official terminology (i.e., the Ministry of Public Security Order No. 123), there is no such thing as Subject 4.

120

Share