What is the function of the triangular windows in a car?

How to use the air conditioning cold air in Geely Vision X3?

Here is how to use the air conditioning cold air in Geely Vision X3: 1. Enter the driver's cabin to see the vehicle's air conditioning control area. 2. The left knob adjusts the air volume of the air conditioning. 3. The right knob adjusts the temperature of the air conditioning. 4. "A/C" is the air conditioning cooling switch, and "OFF" turns off the air conditioning. 5. "MODE" adjusts the direction of the air conditioning vents. 6. The car's internal circulation is controlled by the button shown in the image below. 7. If the front windshield fogs up, you can use the defogging function, and in rainy weather, turn on the rear windshield and mirror heating. Additional information: There are other buttons in the air conditioning control area, including: front defrost button, power-off button, air conditioning vent mode button MODE, internal and external circulation buttons, etc.

111

Share

How to Apply Undercoating?

Here are the steps for applying undercoating: 1. Lift the vehicle and rinse the undercarriage with a high-pressure water gun. 2. Use an air blower to remove water from crevices and wipe dry with a towel. 3. Cover the tires and exhaust pipe surroundings with masking paper and tape. 4. Spray each component of the undercoating material onto the undercarriage in sequence. 5. Perform localized touch-ups on the coating to ensure maximum coverage. 6. Clean non-sprayed areas with a specialized cleaning agent. Additional notes: 1. During operation, ensure proper masking of non-target areas to prevent spray from affecting vehicle performance. After reinstalling the tires, carefully inspect the body paint for any residual undercoating and clean promptly if found. 2. Avoid excessive or overly thick application that may cause dripping. The undercoating should be evenly distributed with a black granular appearance.

112

Share

Can the original vehicle identification number be stamped on a replacement frame?

It is possible to stamp the original vehicle identification number on a replacement frame, but you must bring the invoice for the purchased frame to the vehicle management office for processing. The vehicle management office will re-stamp the number; you cannot do it privately. The vehicle frame has an imprint of the vehicle identification number left at the vehicle management office during registration, which is imprinted annually during inspections for comparison. Therefore, when replacing the frame, you must register the change at the vehicle management office in the original registration location, adhering to the principle of using the original brand and model. Below is additional information: 1. The vehicle frame, commonly known as the chassis: The vehicle frame is supported by the front and rear axles of the suspension system on the wheels and bears almost all the weight of the vehicle and its cargo. 2. The vehicle frame mainly consists of longitudinal beams and cross beams: Specifically, it is divided into side rail type and longitudinal rail type. The material of the vehicle frame is generally high-strength steel plates, mainly connected by riveting the cross beams and longitudinal beams to form a rigid structure, ensuring sufficient strength and stiffness to bear the vehicle's load and impacts from the wheels.

111

Share

What are the reasons for the non-display of the reversing image on the JAC Refine S3?

The reason why the reversing image on the JAC Refine S3 does not display is generally due to damage to the reversing camera. The following is an introduction about the Refine: 1. Exterior Design: The exterior design of the Refine is inspired by Mitsubishi, but it is much wider and larger, with a more rugged and masculine appearance. In addition to the front design, the hard-edged body lines and high ground clearance all reflect this style. The two-tone body enhances the overall grade of the vehicle, and although the body is wide, it does not appear monotonous. 2. Cabin Space: The high floor is a 'byproduct' of the independent chassis and large ground clearance, making entry and exit somewhat difficult. Fortunately, the cabin comfort is reassuring. The 1820 mm width and 1880 mm height create an amazing amount of space, especially for the third-row seats. Due to the Refine's high chassis, unlike other MPVs, the height of the third-row seat surface in the Refine exceeds the wheel arches, avoiding the limitations imposed by the width of the wheel arches.

120

Share

What Causes Transmission Failure in Peugeot 508?

Difficulty in shifting gears, automatic transmission jerking, and abnormal noises from the transmission, etc. Here are the detailed explanations: 1. Difficulty in shifting gears: Symptoms include jerking sensations, difficulty or resistance when engaging, disengaging, or changing gears during startup or driving, as if something is obstructing the movement, accompanied by jolts, vibrations, and jerking. Sometimes, shifting gears is easier when the car is cold but harder when it's warm, leading to significant discomfort. Cause: Insufficient lubrication of related gears and components inside the transmission, failing to form a lasting lubricating film, hindering smooth operation. 2. Automatic transmission jerking: Symptoms of impact sensation (valve body failure) include lack of power during startup, noticeable jolts and jerking at low or medium speeds, with the tachometer needle fluctuating on the dashboard; during high-speed driving, sudden acceleration causes the car to slip, the tachometer needle to rise rapidly, and a distinct impact sensation; shifting from P to R or D gear results in noticeable impact and jerking. Cause: Contaminants inside the transmission clog the valve body, impeding its movement and disrupting the sequential adjustment of oil pressure, leading to jerking and shifting impact faults. 3. Abnormal transmission noises: Symptoms include loud noises during idling, driving, or under high load, with the transmission producing abnormal or even very loud noises, and irregular, dull sounds during gear shifting. Cause: Dirt inside the transmission, wear or severe wear of bearings, gears, or other components, or damage to the gear sides.

114

Share

Where is the fuel pump fuse located in a Volkswagen Golf?

Golf fuel pump fuse is located in the engine compartment, inside the black fuse box next to the battery. The fuse box cover has a diagram indicating the position of the fuel pump fuse. Introduction to automotive fuses: 1. Generally, automotive fuses are installed in two locations - one under the engine hood and another under the instrument panel. Both fuse box covers have stickers inside indicating fuse positions and their current ratings. Locate the position corresponding to the fuel pump icon to find the fuel pump fuse. 2. The function of a fuse: When current abnormally rises to a certain level, the fuse will melt and cut off the current, thereby protecting the circuit's safe operation.

109

Share