···
Log in / Register

What is the fuel consumption per 100 kilometers for the Tianlong Flagship?

6Answers
McGia
09/07/2025, 04:13:55 AM

30L per 100 kilometers is the norm, while 28L/27L/26L can also be easily achieved. The specific fuel consumption may vary depending on the vehicle condition and the driver's habits. How to calculate fuel consumption: By resetting the mileage data on the vehicle dashboard, the onboard computer automatically calculates the fuel consumption based on the recorded mileage and fuel consumption data. Definition of constant-speed fuel consumption: Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. During road tests, it is necessary to follow the standards for test conditions, test methods, and test road selection as specified in the national standards. Test conditions include: the load of the test vehicle, the accuracy of the test instruments, fuel, tire selection, ambient temperature, humidity, air pressure, wind speed, etc.

Was this review help?
103
Share
AlainaRose
09/19/2025, 03:17:08 AM

I've been driving the Dongfeng Tianlong Flagship for long-haul trips, with a fuel consumption typically ranging between 30 to 35 liters per 100 kilometers. As an experienced driver, load significantly impacts consumption: when lightly loaded or empty, I can keep it around 28 liters, but a full load on the highway can push it up to 38 liters. Maintaining a steady speed on flat roads is fuel-efficient, with the most economical speed being under 80 km/h. Poor road conditions like steep mountain roads can unexpectedly increase consumption to 40 liters. Driving habits are crucial; I always ease on the throttle and brakes, and regularly change the engine oil and air filters, which saves a lot on fuel. Once, I hauled goods to another province and averaged 32 liters, which was quite satisfactory. Remember to check tire pressure, as insufficient pressure leads to higher fuel consumption.

Was this review help?
5
Share
Expand All
Chase
11/02/2025, 02:40:37 AM

I was thinking about fuel consumption from an energy-saving perspective. The Tianlong flagship consumes around 32 liters per 100 kilometers, but I've found many ways to reduce it. Starting with maintenance, cleaning the air filter and changing the oil monthly can improve efficiency. While driving, maintaining a steady speed of 70-90 km/h and avoiding aggressive acceleration helps. Load cargo evenly without overloading, and don't overuse the AC in summer—this can save a few liters. I've talked with other drivers, and small tricks like warming up the engine for a few minutes can stabilize fuel consumption at around 30 liters. Overall, there are many influencing factors, but developing good habits makes a noticeable difference—safer and more cost-effective.

Was this review help?
6
Share
Expand All
VanEthan
12/16/2025, 02:44:25 AM

Technically, the fuel consumption is approximately 32 liters per 100 kilometers, primarily related to the powertrain. The efficiency of the Dongfeng Tianlong flagship's diesel engine ranges between 20-40%, with fuel consumption increasing by over 1 liter for every additional ton of load. Factors such as speed, wind resistance, and tire pressure all have an impact: maintaining a steady speed of 80 km/h on highways is most fuel-efficient, while stop-and-go city driving can surge consumption to 35 liters. Regular maintenance of the radiator and exhaust system ensures unobstructed operation, preventing debris buildup that could reduce efficiency. Simply put, combining daily driving habits with data analysis, reasonable control can maintain an average of 30 liters.

Was this review help?
3
Share
Expand All
DiMaverick
02/05/2026, 03:33:10 AM

Last time my friend used the Tianlong flagship for hauling, he said the average fuel consumption was 34 liters per 100 km, but it was only 28 liters when running empty. On one trip, he overloaded a bit and took mountain roads, and the fuel consumption shot up to 40 liters, which was a huge loss. Cases like his remind us not to cut corners by overloading; follow the rules for cargo and maintain steady speeds, and fuel consumption will generally stay under 30 liters. It's recommended to check the vehicle regularly—for example, replace dirty filters promptly to avoid extra fuel consumption, ensuring long-term peace of mind and savings.

Was this review help?
7
Share
Expand All
McGenevieve
05/01/2026, 12:37:11 PM

As an expert in regular vehicle maintenance, the typical fuel consumption for the Tianlong flagship is around 32 liters per 100 kilometers. To maintain this, upkeep is key: change the oil and filters every six months, check tire pressure monthly to ensure it's optimal, and keep the air filter clean to boost efficiency by 2-3%. Driving habits also play a crucial role—maintain a steady speed and avoid sudden braking. Don’t overlook minor issues like slight oil leaks, as over time, fuel consumption can rise to over 35 liters. My experience shows that with comprehensive control, it’s easy to maintain a steady 30-32 liters, ensuring both safety and environmental friendliness.

Was this review help?
10
Share
Expand All
More Q&A

What are the consequences of poor-quality gasoline?

Poor-quality gasoline can lead to a loss of vehicle power in mild cases, while in severe cases, it may cause engine knocking, cylinder scoring, and ultimately engine failure. Gasoline is produced by refining various components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline derived from petroleum refining, which are then blended with high-octane components. It is primarily used as fuel for spark-ignition internal combustion engines in automobiles. At room temperature, gasoline is a colorless to light-yellow, highly mobile liquid that is difficult to dissolve in water and highly flammable. The octane rating of gasoline measures its resistance to knocking in specific gasoline mixtures. Based on different octane ratings, gasoline is classified into several grades. Chemical additives are often mixed into gasoline to enhance chemical stability and other performance characteristics, control corrosiveness, and maintain the cleanliness of the fuel system.
104
Share

What does it mean when a wrench light comes on in the car?

A wrench light appearing on the car dashboard is a maintenance reminder indicator. This small wrench warning light is set by the car manufacturer to alert the owner that the vehicle requires scheduled maintenance based on mileage. After completing the maintenance, the reminder light needs to be reset following a specific procedure to turn it off. The steps to reset the wrench maintenance light are: 1. With the engine off, press the trip meter reset button located below the tachometer; 2. Turn the ignition to the ON position while holding the trip meter reset button until "SERVICE" appears on the display; 3. Pull out the minute button on the clock and turn it clockwise to show the mileage on the display; 4. Turn off the engine and switch the ignition back to the ON position to complete the reset.
108
Share

How to Adjust the Clutch for Subject 2?

Subject 2 clutch adjustment method: The key is to reach the critical value between semi-engagement and neutral coasting with one foot. Different vehicles have different critical points for adjustment. To find this critical value, first engage the gear, then press the clutch until it just enters the gear position, which is the critical point of power engagement. Therefore, slightly lifting the clutch already puts it in semi-engagement. By controlling the position near the limit of semi-engagement, the vehicle speed will naturally reach idle speed. Since the road surface is not absolutely flat—some have pits, bumps, and uneven friction with the ground—it is necessary to place the foot near the critical value between semi-engagement and neutral coasting and make slight adjustments back and forth to maintain a constant speed throughout the entire test process.
102
Share

What does the National VI environmental standard mean?

National VI environmental standard refers to the National 4 emission standard, which regulates the content of harmful gases emitted from vehicle exhaust, such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. To curb the generation of harmful vehicle emissions and encourage manufacturers to improve their product technologies, many countries have established relevant automotive environmental emission standards. The widely adopted European standard is also a reference for China's vehicle emission standards, and based on this, China has introduced national standards that are more suitable for its own conditions. The European emission standards are implemented through the emission regulations of the United Nations Economic Commission for Europe (UNECE) and the emission directives of the European Community (EC), which is now the European Union (EU). The emission regulations are voluntarily recognized by the participating countries of the UNECE, while the emission directives are mandatory for the participating countries of the EC or EU.
102
Share

What engine is used in the Dongfeng Fengshen AX5?

Dongfeng Fengshen AX5 is equipped with two engines, one is a 1.4-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. Here are the detailed specifications: 1.4-liter turbocharged engine: The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 196 Nm, with the maximum torque available between 1800 to 4500 rpm. The maximum power is achieved at 5500 rpm. It features an aluminum alloy cylinder head and block, paired with a 6-speed dual-clutch transmission. 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine produces 150 horsepower and a maximum torque of 230 Nm, with the maximum torque available between 1800 to 4000 rpm. The maximum power is achieved at 5500 rpm. The dual-clutch transmission offers fast gear shifts and high transmission efficiency, making it suitable for pairing with small-displacement turbocharged engines.
116
Share

Where to Find Used Car Parts?

Used car parts can be found in the used car market. Here is some relevant information about used cars: 1. Introduction to used car residual value rate: When buying or selling used cars, it is important to understand a very important indicator, the residual value rate of used cars. The so-called residual value rate of used cars, in layman's terms, refers to the vehicle's value retention. How much a car is worth in the market after several years of use depends on its residual value rate. The higher the residual value rate, the more valuable the used car is. To understand a car's residual value rate, several indicators must be clarified, such as whether the car has a large market presence, whether its color is mainstream, the brand of the vehicle, and the convenience of later maintenance. 2. Precautions for selling used cars: Be sure to sell the vehicle before its insurance expires, otherwise, when trading the used car, an additional insurance cost will be incurred. Secondly, pay attention to the replacement cycle of spare parts.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.