···
Log in / Register

What causes the abnormal noise after braking?

6Answers
Hector
07/29/2025, 01:40:23 AM

The reasons for abnormal noise after braking are: 1. Metal hard spots on brake pads: Small metal particles on the brake pads can produce a sharp noise when braking. Try slamming the brakes a few times or sanding/replacing the brake pads; 2. Severely worn brake discs: After prolonged use, deep grooves may form on the brake discs where the pads make contact, causing noise during braking; 3. Small stones or water film between the brake disc and pad: If driving on gravel roads, in sandy conditions, or right after washing the car, check for and remove any small stones or press the brakes several times to eliminate the water film.

Was this review help?
105
Share
Lewis
08/12/2025, 03:57:24 PM

When I hear strange noises after braking, I usually wonder if the brake pads are worn out. At this point, the sound is like a sharp squeak, reminding you that it's time to replace the parts. On rainy days with lots of water, the brake discs may rust and temporarily make noise, but it usually disappears after driving for a few minutes. Dust getting stuck in the gaps can also cause noise. Newly replaced brake pads might produce sounds for a few days during the break-in period, which isn’t a major issue. However, ignoring it for a long time can worsen braking performance. For example, once my car made noise for half a month, and the disc surface got scratched, making repairs much more expensive. Safety is the top priority—whenever you hear unusual noises, it’s best to take your car to a professional shop for inspection without delay. Regular maintenance of the brake system, such as checking pad thickness and cleaning the wheel hub area every six months, can significantly reduce the chances of such problems occurring.

Was this review help?
19
Share
Expand All
DiKennedy
10/03/2025, 03:18:05 AM

After braking, there is a noise issue. I learned from car enthusiast discussions to first perform a simple self-test to identify whether the noise is coming from the front or rear wheels, then press the brake pedal a few more times to check for patterns. If the noise occurs right after washing the car, driving a few more times might help as the dust could clear away. However, if the noise persists, it should be taken seriously as it might indicate worn-out brake pads or signs of wear. I’ve also encountered cases where uneven brake rotors caused noise, and addressing it promptly can prevent further damage to parts, saving a lot of money. Safety comes first—don’t wait for major issues to arise. Unusual noises often signal potential risks. It’s recommended to regularly inspect brake components to detect abnormalities early, as every drive involves our safety.

Was this review help?
1
Share
Expand All
ZacharyMarie
11/16/2025, 09:09:42 PM

Don't ignore strange noises after braking. This often indicates system issues, such as excessively worn brake pads or loose components. If not addressed immediately, the brakes may fail during critical moments, potentially causing accidents. I once experienced a near rear-end collision. Visit a reliable repair shop for inspection without delay. Safety warnings should never be overlooked. Regular inspection habits can prevent problems before they occur.

Was this review help?
13
Share
Expand All
JakeRose
01/06/2026, 10:46:18 PM

To prevent brake noise, I have developed a habit of regularly washing the wheels and rims to remove dust buildup during daily maintenance. I also check the thickness of the brake pads frequently and replace them if they are too thin. I avoid sudden braking or heavy pressure on long downhill slopes to reduce heat deformation issues. During each maintenance session, I have the technician perform a simple inspection to ensure proper operation. This not only extends the lifespan of the parts but also enhances driving safety, giving me much more peace of mind.

Was this review help?
15
Share
Expand All
JuniperLynn
04/03/2026, 04:46:20 AM

There are many reasons for strange noises after braking. It's normal for new cars or newly replaced brake pads to make brief noises during the break-in period. However, if the noise persists for more than a few weeks, it should be addressed. Common issues include dust, rust, or water accumulation. In my case, the brake discs got wet and rusted, causing noise that disappeared after short-distance driving. But persistent noise may indicate minor problems like incorrect installation or disc deformation. It's better to spend a little money on timely repairs than risk major issues. First, try simple cleaning; if that doesn't work, seek professional diagnosis to ensure worry-free driving.

Was this review help?
3
Share
Expand All
More Q&A

How to Wash Tires to Make Them Black and Shiny?

Tires can be washed to make them black and shiny by following these steps: 1. Rinse the dirt off the tires with clean water; 2. Spray cleaning agent onto stubborn stains; 3. Wait a few minutes and then wipe them clean with a towel. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. Precautions for tire use include: 1. Avoid abrupt starts; instead, accelerate smoothly at low speeds; 2. Maintain straight-line driving on good roads without swerving or making sharp turns; 3. Control speed appropriately when descending long slopes based on the slope's gradient, length, and road conditions.
102
Share

Does prolonged engine idling affect the car?

Prolonged engine idling does affect the car, with the following impacts: 1. Shortens the engine's service life; 2. Increases the risk of damaging the catalytic converter; 3. Leads to more engine carbon buildup; 4. Damages the vehicle's electronic systems; 5. Causes fuel injector malfunctions; 6. Heightens the risk of freeze blockage. An engine is a machine capable of converting other forms of energy into mechanical energy. The maintenance methods for an engine include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Periodically removing carbon deposits from the car; 5. Timely replacement of the car's three filters; 6. Maintaining a reasonable engine speed.
109
Share

Which Audi A5 model is a convertible?

The Audi A5 Cabriolet model is a convertible. Taking the 2021 Audi A5 Cabriolet as an example, it is a 2-door, 4-seater soft-top convertible with body dimensions of: length 4705 mm, width 1846 mm, height 1359 mm, a wheelbase of 2766 mm, and a fuel tank capacity of 58 liters. The 2021 Audi A5 Cabriolet is equipped with a 2.0T turbocharged engine, delivering a maximum power of 185 kW at 5000 to 6000 rpm and a maximum torque of 370 Nm at 1600 to 4500 rpm.
102
Share

What does 260turbo mean?

260 refers to a 1.5-liter displacement engine, and turbo stands for turbocharging, abbreviated as 't'. Combined, it means a 1.5t displacement turbocharged engine. The Accord is a mid-size 4-door, 5-seater sedan under GAC Honda, with body dimensions of: length 4893 mm, width 1862 mm, height 1449 mm, a wheelbase of 2830 mm, and a fuel tank capacity of 56 liters. The Accord is equipped with a 1.5t turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 143 kW and a maximum torque of 260 Nm. It features front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
113
Share

How to set the dashboard to display total mileage on Inspire?

To set the dashboard to display total mileage on Inspire, press the upper right button on the left side of the multifunction steering wheel. Taking the 2019 Inspire as an example, its body dimensions are: length 4910mm, width 1862mm, height 1450mm, wheelbase 2830mm, and fuel tank capacity 56L. The 2019 Inspire is equipped with a 1.5T turbocharged engine, with a maximum power of 143kW, maximum torque of 260Nm, and maximum torque speed ranging from 1600 to 5000 rpm. It is paired with a CVT continuously variable transmission.
112
Share

How to Defog a Car on Rainy Days?

Methods to defog a car on rainy days include: 1. Using air conditioning for defogging—turn on the AC and direct cold air toward the windshield to utilize the dehumidification function and remove fog; 2. Using detergent-based anti-fog solutions; 3. Applying anti-fog spray—spray it on the fogged windshield and wipe dry with a cloth for immediate clarity; 4. Installing rain deflectors—these use aerodynamic channels to reduce wind resistance and direct airflow toward the side mirrors, speeding up evaporation; 5. Using the external air circulation mode; 6. Activating the rear window defroster; 7. Slightly opening the window to allow air convection and reduce temperature differences.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.