···
Log in / Register

What is the fuel consumption of the Wuling Journey?

3 Answers
MacGabriella
07/29/25 1:16pm
The average fuel consumption of the Wuling Journey is 9.6 liters per 100 kilometers. Below are some related introductions about fuel consumption: 1. Driving habits and road conditions: Fuel consumption is greatly influenced by driving habits and road conditions. Avoid heavy acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator heavily when starting, as heavy acceleration can increase fuel consumption by 2 to 3 times compared to normal starting speeds. 2. Braking: Maintaining a safe distance and avoiding frequent braking saves even more fuel. If you don't keep a safe distance, you may often need to brake on the road. When braking, an automatic transmission vehicle will downshift, requiring the vehicle to accelerate again from a lower gear. Starting from a stop or a low gear forces the engine to consume more fuel.
Was this review help?
17
5
Share
Joyce
08/14/25 3:24am
I've been driving the Wuling ZhengTu for hauling goods on long trips for several years, so I know all about its fuel consumption. The official data claims 6 to 7 liters per 100 kilometers, but in my actual driving experience, it averages around 7.5 liters. When running empty on the highway, the fuel consumption can drop to just over 6 liters, which is quite economical. However, in city traffic with congestion or uphill driving, it can spike to 8 liters or more. Driving habits make a big difference—I've found that smooth starts and less braking save a lot of fuel. Heavy loads significantly increase consumption, so I recommend regular tire pressure checks and air filter cleaning to keep the engine efficient. In the long run, driving about a thousand kilometers a month costs just a few hundred yuan in fuel, which is very cost-effective for small businesses. With diligent maintenance, fuel consumption stays stable, and the Wuling ZhengTu's practicality and economy are truly impressive.
Was this review help?
8
4
Share
Expand All
OEdward
10/10/25 2:08am
My family uses the small Wuling ZhengTu for vegetable delivery business, and fuel consumption directly affects our household expenses. The advertised fuel consumption at purchase was around 6.5L/100km, but my actual recorded average is slightly over 7L, exceeding 8L when carrying cargo. At current fuel prices, it costs about 50 yuan per 100km - meaning I only spend 250 yuan for 500km, much more economical than large trucks. Road conditions significantly impact fuel efficiency: on flat roads without cargo, I can maintain 7L/100km, but bumpy roads or frequent sharp turns immediately increase consumption. I've learned to accelerate gently, check tire pressure regularly, and avoid overloading - saving nearly a thousand yuan annually on fuel. It's a reliable family vehicle that balances fuel efficiency with low maintenance costs.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Deal with Intake Camshaft Position Fluctuation in Roewe 350?

Install a dial indicator in the thrust direction at the front end of the camshaft to measure whether the axial end clearance indicated by the dial when the camshaft moves forward and backward (axially) is normal. The limit value for camshaft end clearance is 0.1~0.2mm. If it exceeds this value, you can reduce the thickness of the spacer ring or replace the thrust collar. For fluctuations caused by a faulty camshaft position sensor, simply replace it with a new one. Check if the timing chain is loose, as a loose chain can cause gear misalignment, leading to camshaft fluctuation.
12
4
Share

How to Turn on the High Beam on a CRV?

Carry the key close to the car (within two meters) to unlock the door. After entering the driver's seat, gently press the one-touch start button to power on the vehicle and initiate self-check. On the lower left side of the steering wheel, there is a turn signal lever. The outer part is the headlight and position light switch. Turn the knob to the bottom position to turn on the headlights. The headlights turned on at this time are low beams. In this state, push the lever downward to activate the high beams. After turning on the low beams, pull the light control lever backward to momentarily activate the high beams, also known as flashing the high beams or alternating between high and low beams.
18
0
Share

How to Remove the Door Panel of an Old Jetta?

First, prepare the tools: one flat-head screwdriver, one Phillips-head screwdriver, and one T30 wrench. Unscrew the door handle counterclockwise, remove the inner door handle, pry open the plastic cover from below using the flat-head screwdriver, then loosen the two screws inside with the T30 wrench. Remove the three Phillips-head screws on the door edge; forcefully push open the locking clip of the handle frame (push outward toward the door), then push along the arrow direction to complete the removal. Forcefully remove the rearview mirror adjustment knob, unplug the control button wiring harness connector inside the Jetta door panel. Lift the door panel off the bracket. Forcefully pull open the clips to remove the door panel.
16
0
Share

What is the solution for oil burning in a 2015 Peugeot 408?

For a 2015 Peugeot 408 experiencing oil burning, you can increase the sealing between the engine pistons and cylinder walls by switching to a higher viscosity oil or regularly inspecting and replacing relevant oil system components. Symptoms of oil burning: Blue smoke during cold starts indicates minor oil burning. If you observe large amounts of blue smoke from the exhaust pipe, this signals significant engine oil burning. A very black exhaust pipe interior wall is another indicator. Preventive measures for oil burning: Use high-quality engine oil. Oil tends to corrode and degrade under prolonged high temperatures, thinning the oil film and making it easier to enter the combustion chamber. Using premium quality oil can significantly delay this phenomenon.
15
4
Share

How to route wires from outside to inside the car for Magotan B7?

Open the hood of the Magotan B7, locate the firewall on the partition between the hood and the driver's seat, and make a hole in the rubber plug, which serves as the passage for the wire harness. Open the glove box, find the fuse box of the Magotan B7 inside, where there will be spare fuse positions. Connect the external wire harness's fuse circuit to the spare fuse. After connecting the wires, organize the wire harness properly, cover it with protective caps, ensure waterproofing, and secure the wire harness in the appropriate position on the car using fastening clips. After debugging and confirming normal operation, seal the rubber plug wire harness hole with silicone sealant, remove any excess sealant, and finish with aesthetic treatment.
17
4
Share

What to Do If the Geely Vision Car Key Is Lost?

When taking delivery of the car, the 4S dealership will provide the owner with two keys, one of which is a spare key. If a key is lost, the first step is to locate and use the spare key. Call a professional locksmith company and request them to send a technician to assist with unlocking the car. You will need to provide identification documents such as an ID card and driver's license. Most 4S dealerships now offer emergency rescue services. Contacting the dealership will help get the car door opened and arrange for a new key to be made. The Geely Vision car key consists of a remote control and a mechanical key. Identical models are available for purchase online. After purchasing, the owner can follow the instructions to self-match the key.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.