···
Log in / Register

What is the fuel consumption of the WEY VV7?

1Answers
MargaretRose
09/08/2025, 01:20:29 AM

Here is the relevant information about the fuel consumption of the WEY VV7: Introduction 1: The official MIIT comprehensive fuel consumption provided for the WEY VV7 is 7.7L/100km, but this is for reference only and not an absolute parameter. Introduction 2: Fuel consumption can be affected by various factors, such as road conditions, driving habits, and oil quality. Below is more information about the WEY VV7: Introduction 1: The WEY VV7 is the mass-produced version of the SUV model. The new car retains the exterior design of the W01 model, officially referred to as the 'leopard-style' front face, featuring a honeycomb grille paired with full LED headlights. In terms of dimensions, the new car measures 4749mm × 1931mm × 1655mm in length, width, and height, with a wheelbase of 2950mm, positioning it as a mid-size SUV. Introduction 2: The WEY VV7 series will also include a sportier VV7s version and a standard VV7c version. The VV7s features a more exaggerated front face design, with a wavy air intake grille and a new front bumper design. At the rear, it adopts a more striking quad-exhaust layout. Introduction 3: The intelligent matrix LED headlights with ALS system, panoramic sunroof automatically closes when the speed exceeds 120KM/h or during rain. The smart-sensing tailgate comes with position memory and anti-pinch design, supporting foot-sensing opening. It also features 21-inch polished alloy wheels and 255/45R21 low-profile tires.

Was this review help?
120
Share
More Q&A

Is a Lighter Car Accelerator Pedal a Good or Bad Thing?

Throttle becoming lighter is a good thing. Below are the functions of the throttle and reasons for abnormal noises: Functions of the throttle: The car engine throttle is controlled by the pedal, also known as the accelerator pedal, which is the fuel supply control device for the vehicle engine. The function of the throttle is to control the engine throttle valve opening by adjusting the pedal pressure, thereby regulating the air intake and controlling the engine speed. Reasons for throttle abnormal noises: Carbon buildup in the throttle valve causing sticking—clean the throttle valve; wear of the throttle pedal support pin—apply grease or replace the support pin; poor installation of the throttle cable—for electronic throttles, inspect the throttle pedal mechanism and the throttle pedal sensor.
114
Share

What are the effects of a faulty left rear wheel sensor on the car?

Once the wheel speed sensor is indeed damaged, it not only causes a certain deviation in the speed display on the dashboard but also leads to unstable engine idle and reduced acceleration performance. Secondly, when the vehicle starts or decelerates to stop while driving, it is easy to experience a momentary pause phenomenon. Relevant information about the intake pressure sensor is as follows: 1. Introduction: The intake pressure sensor (Manifold-Absolute-Pressure-Sensor), abbreviated as MAP. It connects to the intake manifold via a vacuum tube, sensing the vacuum changes inside the intake manifold as the engine operates at different speeds and loads. These changes are then converted into voltage signals through internal resistance changes in the sensor, which the ECU uses to adjust fuel injection and ignition timing. 2. Working principle: The intake pressure sensor detects the absolute pressure in the intake manifold behind the throttle. Based on the engine speed and load, it detects changes in the absolute pressure within the manifold, converts these into signal voltage, and sends it to the engine control unit (ECU). The ECU then uses this signal voltage to control the basic fuel injection amount.
118
Share

What are the symptoms of a faulty wastegate valve?

Here are the symptoms of a faulty turbocharger wastegate valve: 1. When the boost pressure in the compressor exceeds the predetermined value: The air pressure pushes the diaphragm to compress the spring, causing the push rod to extend outward and open the wastegate valve. This diverts part of the exhaust gas away from the turbine, allowing it to enter the exhaust pipe directly through the bypass valve installed before the turbine. This reduces the amount and pressure of exhaust gas driving the turbine, thereby lowering the turbine speed and boost pressure, preventing engine overspeeding due to "over-boosting". 2. When the compressor pressure drops to a certain level: The pressure above the diaphragm is insufficient to overcome the spring force, causing the spring to rebound and move the linkage to close the wastegate valve. All exhaust gas then drives the turbine again, increasing the boost pressure until the next time the wastegate valve opens. This cycle continues, keeping the engine's boost pressure controlled at a fixed value.
111
Share

Is It Normal for the Car's Fan to Keep Running When the Air Conditioner Is On?

Yes, it is normal. When the air conditioner is turned on, the air conditioning compressor starts working and requires the fan to dissipate heat. Here is some related information: 1. Introduction: Car air conditioning refers to the air conditioning device installed in a car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Structure: It generally includes a cooling device, a heating device, and a ventilation device. This combined system makes full use of the limited space inside the car, has a simple structure, and is easy to operate, making it a popular modern car air conditioning system internationally.
101
Share

Is the Impact of Bent Connecting Rod in Water-Fording Vehicles Significant?

There is an impact, and it is recommended to repair it as soon as possible. The consequences of slight bending deformation of the engine piston connecting rod include: unstable idle speed accompanied by shaking and vibration after the engine starts; piston offset, as long as the connecting rod is deformed, the piston will generally experience offset wear, causing abnormal noise after the engine starts; the cylinder will leak air, leading to insufficient cylinder pressure, resulting in engine misfire and severe shaking. Extended information about the piston connecting rod is as follows: 1. The function of the connecting rod: The connecting rod connects the piston and the crankshaft, converting the reciprocating motion of the piston into the rotational motion of the crankshaft, and transmitting the force received by the piston to the crankshaft. 2. The composition of the connecting rod: The connecting rod generally consists of three parts: the small end, the rod body, and the big end.
113
Share

How much fuel can a 48V mild hybrid save?

After multiple tests, it has been concluded that 48V mild hybrid technology has no significant impact on vehicle emissions, but it does have a considerable effect on fuel consumption. Under ideal conditions, it can achieve approximately 15% fuel savings. The principle of 48V mild hybrid technology involves adding a 48V auxiliary motor between the engine and transmission without altering the engine compartment layout. Its main functions are twofold: first, to save fuel and improve the smoothness of the engine during low-torque phases; and second, to reduce the electrical load on the vehicle. Below is a detailed introduction to new energy vehicles: 1. Definition: New energy vehicles refer to vehicles that use unconventional vehicle fuels as their power source, integrating advanced technologies in vehicle power control and drive systems to form vehicles with advanced technical principles, new technologies, and new structures. 2. Types: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.