···
Log in / Register

What is the fuel consumption of the imported Edge 2.0t?

6Answers
VonEliana
08/28/2025, 10:44:15 PM

Imported 2.0t Edge has a fuel consumption of 10.5 liters. Introduction: The Edge is a mid-size SUV under Ford. The domestic version of the model uses two engines in total, one is a 2.0-liter turbocharged engine, and the other is a 2.7-liter twin-turbocharged engine. Additional information: The 2.0-liter turbocharged engine has a maximum power of 245 horsepower and a maximum torque of 390 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed is 2500 to 3500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block.

Was this review help?
110
Share
LeRowan
09/10/2025, 03:28:26 AM

I've driven the imported Edge 2.0T, and its fuel consumption is typically around 10-13 liters per 100 km in the city and 7-9 liters per 100 km on the highway, with significant fluctuations in real-world driving. The turbocharged engine delivers strong performance but is quite thirsty, especially in traffic jams where consumption can spike above 12 liters. Low tire pressure or a dirty air filter can increase fuel consumption by 1-2 liters, and using the AC, particularly in summer, adds another liter or more. I recommend regular maintenance checks on the fuel system and keeping tire pressure at the standard value to maintain reasonable fuel consumption. If you do a lot of city driving, budget accordingly—a full tank might only last around 400 km, which can be costly, but the driving experience is quite enjoyable.

Was this review help?
17
Share
Expand All
OJuniper
10/24/2025, 04:20:22 AM

As a car owner, I've been driving an imported Edge 2.0T for several years. My daily urban commuting fuel consumption is 11-13 liters per 100 km, while highway driving is quite economical at around 8 liters. A full 60-liter tank can cover 450-500 km, but consumption increases quickly in traffic jams. Winter heating doesn't affect it much. When the fuel light comes on, refuel immediately to avoid engine wear and increased consumption. Poor driving habits like sudden braking or driving with windows open at high speeds can increase fuel consumption by 10%. I've tried driving more gently and saved quite a bit. Worn tires need replacement, as the original tires have better fuel efficiency. Overall, it's not the most economical but offers ample space and strong power, making it suitable for families.

Was this review help?
9
Share
Expand All
LaCarlos
12/07/2025, 03:42:13 AM

The imported Edge 2.0T has a fuel consumption of 10-12 liters per 100 kilometers, costing 0.8 to 1 yuan per kilometer at current fuel prices. Driving 20,000 kilometers a year results in fuel expenses of 16,000 to 24,000 yuan, which is slightly higher than similarly priced vehicles like the Highlander. More highway driving can save some costs, but using air conditioning increases expenses by 15%, which shouldn't be overlooked. The higher fuel consumption is offset by stronger power and a more enjoyable driving experience.

Was this review help?
20
Share
Expand All
VanGia
01/27/2026, 10:05:16 PM

Compared to SUVs in the same class, the imported Edge 2.0T has similar fuel consumption to the Crown Road or Tiguan, averaging 10-12 liters per 100 kilometers. However, the Edge has stronger power and slightly higher fuel consumption by 1-2 liters, with 8 liters on highways being acceptable. The newer domestically produced models are more fuel-efficient, while the imported version is heavier but more stable at high speeds. Driving in suburban areas saves fuel, while congested areas consume more. Dirty tires or air filters can quickly increase fuel consumption, so regular checks are necessary.

Was this review help?
10
Share
Expand All
VonAllie
04/23/2026, 02:57:01 AM

From my experience driving the Edge 2.0T, I've learned that checking tire pressure and keeping it properly inflated saves fuel when consumption is high; regular oil changes and air filter maintenance protect the engine; avoid blasting the AC and keep the temperature moderate; drive smoothly without sudden acceleration or braking, maintaining a steady speed on highways. In city driving, it typically consumes 10-12 liters, but after optimization, it drops to 8-9 liters with more stable performance on highways. A full tank can cover an extra 50 kilometers, and using fuel additives effectively cleans carbon deposits. Rainy conditions increase fuel consumption slightly, so it's good to have anti-slip tires ready.

Was this review help?
8
Share
Expand All
More Q&A

How early can a motor vehicle undergo its annual inspection?

Motor vehicles can undergo their annual inspection up to 3 months in advance. For example, if a vehicle's inspection validity expires in September of this year, then the annual inspection period would be from July 1st to September 30th of this year. There are several ways to check the annual inspection time. The most straightforward method is to check the vehicle registration certificate and the electronic policy for compulsory traffic insurance, which contain the motor vehicle's registration date. The registration month is the month when the motor vehicle's annual inspection is due. Additionally, you can directly observe the annual inspection sticker, which displays the validity period of the inspection. Points to note about annual inspections: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit them from continuing to operate. Vehicles that do not undergo the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.
102
Share

What is the oil specification for the Excelle?

The most commonly used original equipment manufacturer (OEM) oil specification for the Excelle is 5W-30, specifically Mobil 1 full synthetic oil. If you wish to change the oil during later maintenance, you can choose from brands like Mobil, SRS, Shell, and Castrol. The official Excelle manual recommends oil specifications of 5W-20, 5W-30, or 5W-40. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in an Excelle is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply a small amount of new oil to the gasket of the new oil filter and hand-tighten it clockwise. Add the new oil through the oil filler cap on the engine's valve cover. Typically, fill up to three-quarters of the oil bottle. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After turning off the engine, pull out the oil dipstick to check that the oil level is within the standard range.
102
Share

How long after the voice announcement in Subject 3 must the operation be completed?

After the voice announcement, the action must be completed within five seconds. Below is relevant information about driving test Subject 3: 1. Introduction: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Specific test content of Subject 3: The road driving skills test generally includes: preparation before getting on the car, simulated light test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, turning around, and driving at night. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of handling after traffic accidents.
104
Share

Why is the vehicle inspection label yellow?

The yellow label for vehicle inspection is only used to distinguish the year of inspection expiration. Currently, there are three colors for vehicle inspection stickers, with a three-year cycle that is standardized nationwide, making it convenient for traffic police to check. Non-commercial vehicles are exempt from on-site inspection within the first 6 years, only requiring an inspection mark application every two years. For vehicles older than 6 years but less than 10 years, inspection is required every two years, meaning private cars only need on-site inspections twice within 10 years, specifically in the 6th and 8th years. Private cars aged 10-15 years require annual inspections, while those over 15 years old require inspections every six months. Commercial passenger vehicles within 5 years require annual inspections; those over 5 years require inspections every six months. Trucks and large/medium non-commercial passenger vehicles within 10 years require annual inspections; those over 10 years require inspections every six months. Motorcycles within 4 years require inspections every two years; those over 4 years require annual inspections. Vehicle inspection mainly includes the following items: Appearance inspection: Mainly checks vehicle lights, body appearance, suspension, sunroof, and tires, ensuring lights function properly, no unlit lights, no unauthorized body color changes, and no modifications to the suspension. Emission test: Checks whether the vehicle's tailpipe emissions meet national standards during high-speed operation. On-site inspection: Primarily examines the vehicle's braking system, headlights, horn, and chassis. Violation check: Before the inspection, all traffic violations must be cleared to pass. Vehicle inspection can be done up to 90 days in advance but must not be overdue. Consequences of overdue inspection include: Vehicles not inspected on time are not allowed on the road; driving an uninspected vehicle results in a 3-point penalty and a 200 RMB fine. If an uninspected vehicle is involved in a traffic accident, the driver bears full or primary responsibility, and insurance will not cover it. Driving an uninspected vehicle is considered illegal driving and may result in vehicle impoundment.
107
Share

Is a Physical Examination Required for a Driver's License?

"A physical examination is required when applying for a driver's license. The examination mainly includes vision tests, height and color recognition ability, hearing, as well as checks for abnormalities in the upper limbs, lower limbs, torso, and feet. Before taking the driver's license test, a physical examination is mandatory to determine whether the applicant meets the physical requirements for driving. Driver's license physical examination process: First, go to the local People's Hospital for the examination. If the driving school has a designated hospital for physical examinations, follow the school's instructions. Bring your ID card and personal belongings, as hospitals can be crowded, so keep your items secure. The hospital will have a designated area for the examination, which you can inquire about at the front desk or volunteer service counter. After completing the examination, the staff will provide a printed report. This report needs to be stamped at the service counter, and once stamped, the physical examination form is complete. Keep the examination invoice safe, as you will need to submit it to the driving school along with other required documents. Each subject can be taken once, with one retake allowed if failed. If you do not take the retake or fail the retake, the current test session ends, and you must reschedule the test. Within the 3-year validity period of the driving skill test permit, the number of test appointments for Subject 2 (road driving skills) and Subject 3 (road driving skills) cannot exceed 5 times each, meaning there are a total of 10 test opportunities for both subjects."
109
Share

Why Doesn't Volvo Use Longitudinal Engines?

Volvo does not use longitudinal engines because they are considered unsafe. Volvo is a Swedish brand, and Swedish laws stipulate that domestically produced cars must prioritize safety on icy and snowy roads, where front-wheel drive is deemed safer than rear-wheel drive. Since transverse engines are primarily used in front-wheel-drive vehicles, Volvo insists on using transverse engines. Transverse Engine: A transverse engine refers to an engine that is parallel to the front axle of the car. Simply put, if you stand in front of the car facing the engine and the engine is placed horizontally in front of you, it is a transverse engine. In a transverse engine, the crankshaft, transmission input/output shafts, and axle are all parallel. Therefore, for front-wheel-drive vehicles, a front transverse engine is the most suitable, as it offers a short power transmission distance and consistent direction, resulting in higher transmission efficiency. Longitudinal Engine: A longitudinal engine refers to an engine that is perpendicular to the front axle of the car. Simply put, if you stand in front of the car facing the engine and the engine is placed vertically in front of you, it is a longitudinal engine. Rear-wheel-drive vehicles generally use longitudinal engines because the power needs to be transmitted to the rear axle. When the transmission distance cannot be shortened, minimizing directional changes in power transmission becomes essential.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.