···
Log in / Register

What is the fuel consumption of the GL8 2.0T?

4Answers
LeStephen
09/06/2025, 10:56:22 PM

There are 16 available models of the GL8 2.0T, including the 2022 Land Business Class 652T Comfort, 2022 Land Business Class 652T Luxury, and 2022 Land Business Class 652T Smart Luxury, all equipped with a 237-horsepower engine. The NEDC fuel consumption is 7.94L per 100 kilometers. The fuel tank capacity varies among different GL8 2.0T models. The driving distance on a full tank is as follows: Models with the 237-horsepower engine have a fuel tank capacity of 66L, allowing a driving distance of 66/7.94*100=831.2KM on a full tank. Automobile fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, will increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to vaporize during a cold start, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.

Was this review help?
116
Share
KennedyLee
05/09/2026, 07:30:44 AM

I drove the Buick GL8 652T model for two years, with an actual combined fuel consumption of around 9.5L. In city traffic with frequent stops, it could go up to 12L, but on national highways maintaining a steady 70 km/h, it could drop to 7.9L. Here are some fuel-saving tips: don't turn off the start-stop function, as this car comes with a 48V mild hybrid system; use eco mode during cruising, which can lower the engine RPM by 500; maintaining tire pressure at 2.6 saves half a liter of fuel compared to 2.3. Once, I borrowed a friend's older 25S model for a long trip, and the 2.0T engine saved 1.8L per 100 km compared to its 2.5L engine. The new technology has clearly made significant progress.

Was this review help?
6
Share
Expand All
CharlieAnn
05/11/2026, 12:19:04 AM

Having worked as a chauffeur for five years, I've upgraded through three generations of GL8. The current 2.0T model saves nearly 20% fuel compared to the previous 2.4L. During morning rush hour airport transfers, it averages 9.8L/100km, while evening peak traffic can push consumption up to 13L/100km. Personal tips: Replacing the air filter every 10,000km shows the most noticeable fuel savings; Using 0W20 oil instead of 5W30 saves 0.5L/100km; AC usage in summer has minimal impact, but avoid warming up the car for more than three minutes in winter. Once I borrowed the Avenir 4-seater version - the added weight from aviation seats increased consumption by 0.8L. Remember: ECO mode is gimmicky, manual shifting delivers precise fuel control.

Was this review help?
5
Share
Expand All
DelKyle
05/11/2026, 04:26:59 AM

Tested the cylinder deactivation technology on the GL8: When cruising at 80 km/h with two cylinders operating, the instantaneous fuel consumption was 5.8L, but it instantly rose to 7.9L when switching to four cylinders. It is recommended to turn off the auto-hold function in urban driving, as this feature increases fuel injection by 10% at each start. Actual measured factory data: With a 66L fuel tank, the low fuel light comes on after 700 km in city driving, and it can run up to 830 km on the highway. Pay attention to the fuel trim value; I once refueled at a small gas station, which caused a long-term fuel trim of +15%, directly increasing fuel consumption by 1.2L. When the rear seats are frequently occupied by three people, the suspension compression leads to increased rolling resistance, resulting in approximately 0.5L more fuel consumption.

Was this review help?
19
Share
Expand All
More Q&A

What is the reason for rapid consumption of antifreeze without leakage?

Rapid consumption of antifreeze without leakage is caused by a damaged cylinder head gasket. High-temperature and high-pressure gases from the cylinders enter the cooling system, leading to excessive antifreeze consumption. To prevent this situation, regular inspections of all seals and connections should be conducted to ensure their tightness. Below are specific details about antifreeze: 1. Function: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent properties such as preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. 2. Main types: There are many types of automotive antifreeze, including inorganic substances like calcium chloride (CaCl2), organic substances like methanol (CH3OH), ethanol (C2H5OH, commonly known as alcohol), ethylene glycol (C2H4(OH)2, commonly known as sweet alcohol), glycerol (C3H5(OH)3, commonly known as glycerin), lubricating oils, and everyday substances like sugar and honey, all of which can serve as the base liquid for antifreeze. By adding an appropriate amount of pure soft water (water with little or no calcium or magnesium ions, such as distilled water, uncontaminated rainwater, or snow water, with a total hardness concentration between 0-30ppm), it can be turned into antifreeze.
109
Share

What is the actual lifespan of the Toyota Levin CVT transmission?

Toyota CVT transmissions can last for 300,000 to 500,000 kilometers, with the specific lifespan depending on individual usage conditions. Here is more information about CVT transmissions: 1. The CVT continuously variable transmission does not use gear transmission but connects the input and output shafts through a steel belt to achieve the conversion between transmission ratios. Due to this, the smoothness of CVT transmissions is arguably the best among all transmission types, and their simple structure makes them easy to repair. 2. The disadvantages of CVT transmissions include: lower transmission efficiency and an inability to withstand excessive loads, which can easily lead to slipping phenomena.
101
Share

Can I Buy a Car and Hire Someone to Drive It Without a Driver's License?

You can buy a car and hire someone to drive it without a driver's license. According to the vehicle registration regulations, individuals applying for vehicle registration do not need to provide a driver's license. Therefore, you can legally purchase a vehicle and register it. However, the vehicle owner is not allowed to drive on the road and can only have someone with a valid driver's license operate the vehicle. The penalties for driving without a license are as follows: 1. A fine ranging from 200 to 2000 yuan and detention for up to 15 days. 2. If unlicensed driving causes a traffic accident where the driver bears primary responsibility and results in serious injury to one person, criminal liability may apply. 3. Insurance companies may refuse to cover accidents caused by unlicensed driving. 4. If a licensed vehicle owner allows an unlicensed person to drive the vehicle, the owner's driver's license will be revoked.
102
Share

Can You Sit Cross-Legged in the Front Passenger Seat?

You cannot sit cross-legged in the front passenger seat. Sitting cross-legged on the seat without wearing a seatbelt can turn the passenger into a "projectile" that is rapidly ejected in the event of a collision. Even if the seatbelt is fastened, keeping the person fixed to the seat, the abdomen and ribs may suffer injuries due to the impact force that cannot be transferred through the legs and lower body, potentially causing damage to the abdominal cavity and ribs. Here are some precautions for car passengers: 1. Placing legs on the dashboard: When riding in the front passenger seat, placing your feet on the dashboard can lead to severe injuries in a frontal collision. Due to inertia, the upper body will lean forward, while the legs, placed too high, will press toward the body, folding the entire body into a V-shape. In a high-speed collision, this can result in a broken waist. 2. Extending the head, hands, or feet out of the window: Such behavior not only increases the risk of injury but also obstructs the driver's view, leading to unnecessary harm.
101
Share

Air Conditioning Compressor Inspection Methods?

Automotive air conditioning compressor inspection methods are as follows: 1. For issues with the compressor motor, improper closing of the compressor suction and discharge valves, and thermal protector faults, replacement is the recommended solution. 2. For compressor shaft seizure or cylinder jamming faults, repair attempts can be made first. Specific methods include the following: 1. Tapping method. After starting, use a wooden hammer to tap the lower half of the compressor to vibrate the stuck internal components into operation. 2. Capacitor start method. A capacitor with a larger capacity than the original can be connected to the circuit for starting. 3. High-voltage start method. The power supply voltage can be increased using a voltage regulator for starting. 4. Pressure relief method. Start the compressor after completely releasing the system's refrigerant.
105
Share

How to Use the Left Turn Signal?

Here are the methods for using car turn signals: 1. Generally, turning the signal upwards (clockwise) indicates a right turn, while turning it downwards (counterclockwise) indicates a left turn. 2. When overtaking, first activate the left turn signal, then the right turn signal. Use the left signal when entering a highway and the right signal when exiting. 3. No signal is needed when entering a roundabout, but use the right signal when exiting. 4. Activate the right turn signal when pulling over to park and the left signal when starting from a parked position. 5. Use the left turn signal when making a U-turn. 6. When changing lanes, signal in advance to give following drivers enough time to react. The timing for signaling should be based on road conditions, traffic, and speed, but generally, it should not be less than 10 seconds.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.