What is the fuel consumption of the 2013 508?

1 Answers
DeEleanor
07/30/25 7:41am
The fuel consumption of the 2013 508 is 10.99L/100KM. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The car consumes the most fuel during low-speed starts, so gently pressing the accelerator when starting can prevent excessively high RPMs and effectively reduce fuel consumption. 2. Avoid high RPMs: Try to avoid unnecessary high RPMs, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid sudden braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to glide.
Was this review help?
9
4
Share
More Forum Discussions

What Causes a Car Fan Not to Spin?

Reasons why a car fan does not spin: 1. The water temperature has not reached the required level: Most car radiator fans nowadays operate using electronic temperature control, so the fan will only start spinning normally when the water temperature inside the car reaches the required level. If the temperature is too low, the radiator fan will not spin. Therefore, if the car radiator fan is not spinning, the first thing to check is whether the water temperature has reached the required level. 2. Relay failure: If the water temperature meets the requirements but the car radiator fan still does not work, the issue might be with the fan relay. If the relay is faulty, the car's radiator fan will not operate. 3. Temperature control switch problem: If there are no issues with the above two aspects, then the temperature control switch should be checked. Sometimes, faults can occur here, which can also affect the operation of the car radiator fan, so it is important to inspect this as well.
10
2
Share

What is the function of a thermostat?

The function of a thermostat is to automatically regulate the amount of water entering the radiator based on changes in coolant temperature, while also altering the circulation range of the water. This achieves the adjustment of the cooling system's heat dissipation capacity, thereby ensuring the engine operates within an appropriate temperature range. A thermostat is a valve that controls the flow path of the coolant, serving as an automatic temperature-regulating device. It typically contains a temperature-sensitive component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The thermostat must maintain good technical condition; otherwise, it can severely affect the normal operation of the engine. For instance, if the main valve of the thermostat opens too late, it can cause the engine to overheat. Conversely, if the main valve opens too early, it prolongs the engine's warm-up time, resulting in the engine temperature being too low.
3
4
Share

What are the three main components of a mechanical steering system?

Automotive steering systems generally consist of three main components: the steering control mechanism, the steering gear, and the steering linkage. When the steering wheel is turned, the steering shaft and worm gear rotate, causing the steering arm to swing and push the drag link back and forth. Since the steering knuckle pivots around the steering axis, it turns one of the front wheels to achieve vehicle steering control. Below is relevant information about steering systems: 1. There are two types of steering systems: mechanical steering systems, where the steering power comes from the driver's physical effort; and power steering systems, where the steering power includes both the driver's effort and the engine's power, typically used in vehicles weighing over 50 tons. 2. The requirements for steering systems include: the ability to self-center, light and responsive operation, consistency between steering direction and vehicle movement, minimized kickback to the steering wheel, and no self-oscillation during driving.
15
1
Share

Where to Adjust for Insufficient Supercharger Pressure?

For insufficient supercharger pressure, you can adjust the screw on the supercharger. First, open the outer cover of the supercharger to reveal a small screw. At the end of this screw, there is a nut. Loosen the nut, shorten the screw, and then tighten the nut securely. Vehicle superchargers are mainly divided into two types: mechanical superchargers and exhaust turbochargers. Mechanical superchargers are commonly found in European cars. While driving the supercharger consumes some of the engine's output power, the effect on power enhancement is not significant, and fuel economy is not high. However, the smoothness is better than that of exhaust turbochargers. Exhaust turbochargers utilize exhaust energy to drive the turbocharger. Their characteristic is that there is no mechanical connection between the turbocharger and the engine, mainly an air path connection. For power improvement and fuel saving, the effect is more pronounced.
2
3
Share

What is the reason for the flashing anti-theft light and failure to start in the classic Focus?

This is due to the activation of the engine anti-theft function and loss of computer system data. Reprogramming the PCM for the engine computer can restore functionality. If the issue persists, it is necessary to check the circuit, and it is recommended to seek professional inspection at a 4S shop. The engine electronic anti-theft system includes a transponder embedded in each key. Relevant information about the Focus is as follows: 1. Body dimensions: length is 4534mm, width is 1823mm, height is 1483mm, and wheelbase is 2648mm. 2. Exterior design: The model is designed with a sporty style, featuring more streamlined body lines. The interior also fully embodies a fashionable and sporty style, with an 8-inch navigation touchscreen and button layout that enhances driver convenience. 3. Configuration system: The Focus adopts intelligent automotive technology, equipped with an automatic parking system and vertical parking assist system, providing drivers with a more comfortable and convenient driving experience.
19
1
Share

What Causes a Motorcycle to Stall After Running for a While?

No fuel, abnormal fuel supply, excessively high engine temperature, circuit failure, etc. Below are detailed explanations of the related causes: No fuel: Before stalling due to fuel exhaustion, the engine speed will suddenly increase automatically (without the throttle being opened). This phenomenon is easily noticeable when driving at low speeds. At this point, stopping to check whether there is fuel in the tank can confirm the issue. Abnormal fuel supply: In this case, you will feel a lack of power before stopping, which gradually decreases, followed by a slow automatic stop. Excessively high engine temperature: Overheating and poor lubrication can cause the piston and cylinder to seize, leading to stalling. Circuit failure: An automatic stop caused by a sudden circuit interruption will occur without any prior abnormalities in the engine.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.