···
Log in / Register

What is the fuel consumption of the 2011 Subaru Forester?

6Answers
DiTalia
08/27/2025, 12:48:22 AM

2011 Subaru Forester has four models: 2.5XT Automatic Luxury Edition, 2.5XT Automatic Luxury Navigation Edition, Manual Comfort Edition, and 2.0XS Automatic Comfort Edition. The two models equipped with a 150-horsepower engine have an NEDC fuel consumption of 8.2L per 100km. The two models equipped with a 230-horsepower engine have an NEDC fuel consumption of 10.5L per 100km. All 2011 Subaru Forester models have a fuel tank capacity of 60L. The distance that can be covered on a full tank of fuel is as follows: For the two models with a 150-horsepower engine, the distance on a full tank is 60/8.2100=732km. For the two models with a 230-horsepower engine, the distance on a full tank is 60/10.5100=571km. Vehicle fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The vehicle itself: Vehicles with larger engine displacement generally consume more fuel because higher displacement usually means higher power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel as greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine computer controls higher RPMs to warm up the engine, which also increases fuel consumption.

Was this review help?
119
Share
VanEli
09/08/2025, 11:49:13 PM

I've driven quite a few Subarus, and the 2011 Forester's official fuel consumption is around 11 liters per 100 kilometers in city driving and about 8 liters on the highway, with a combined average of 9.5 to 10 liters. In real-world driving, it can reach 12-13 liters in heavy city traffic, especially if you frequently accelerate hard or use the air conditioning too much. The car comes with all-wheel drive, which makes it very safe, but the slightly higher fuel consumption is reasonable. I remember the fuel tank is about 50 liters, so you can easily get 400 kilometers in pure city driving and over 500 kilometers on the highway. Maintaining good habits is crucial, like not carrying too much luggage and keeping the tire pressure optimal, which can help save fuel. Regular maintenance, such as changing the air filter, can also prevent a sudden spike in fuel consumption. Although the numbers aren't as low as smaller cars, this Forester is durable and practical, performing steadily on mountain roads, making it highly recommended.

Was this review help?
7
Share
Expand All
ElliottMarie
10/23/2025, 12:37:58 AM

As a long-time owner, my 2011 Forester typically gets around 400 kilometers per tank during city commuting, with fuel consumption of about 12 liters per 100 kilometers. On the highway at around 90 km/h, it drops to 7-8 liters, which feels quite economical. Many factors affect actual fuel consumption, such as road conditions, AC usage intensity, and even engine oil type; I usually use synthetic oil for more stable performance. Chatting with friends, we all agree this model's fuel efficiency isn't the absolute best but offers good balance, with smooth and reliable power delivery. If you buy one, I'd suggest avoiding aggressive starts, checking tire pressure weekly, and being mindful that prolonged AC use increases consumption – save where you can. Drive attentively, and overall this car proves worry-free and durable.

Was this review help?
7
Share
Expand All
CarterDella
12/06/2025, 12:01:56 AM

When working at the auto repair shop, we often encounter 2011 Foresters. Customers generally report fuel consumption between 10 to 13 liters, with higher figures in urban areas and lower on highways. The key factor is the vehicle's condition: if the engine has significant carbon buildup or a clogged air filter, fuel consumption will spike; conversely, using high-quality engine oil can help stabilize it. With an overall fuel tank capacity of 50 liters, a city range of over 400 kilometers is normal. Regular maintenance is crucial—don't neglect it.

Was this review help?
12
Share
Expand All
DelaneyAnn
01/26/2026, 01:21:04 AM

Compared to other SUVs, the 2011 Forester has slightly higher fuel consumption than the CRV of the same year but offers stronger handling. It averages around 11 liters in the city, 8 liters on the highway, and about 10 liters combined. Technological advancements have improved its fuel efficiency, making it generally acceptable.

Was this review help?
20
Share
Expand All
OClaire
04/21/2026, 11:49:33 PM

Driving a 2011 Forester and aiming to save fuel? The official combined fuel consumption is around 10 liters, but in reality, it can reach 12. Key optimization tips: start gently, avoid sudden braking, and maintain proper tire pressure. Regular oil changes can prevent additional consumption.

Was this review help?
10
Share
Expand All
More Q&A

Can Only the Rubber Bushing Be Replaced When the Control Arm Bushing Ages?

The rubber bushing of the control arm can be replaced separately when it ages. Below are the functions of the automotive control arm: 1. Support Function: The control arm serves as the guide and support for the suspension. Its deformation affects wheel alignment and reduces driving stability. If there is an issue with the front control arm, symptoms may include steering wheel wobbling, the vehicle pulling to one side when the steering wheel is released, and difficulty maintaining control at high speeds. If these symptoms are not significant, realigning the wheels may suffice without needing a replacement. 2. Connection Function: The control arm acts as the linkage between the vehicle frame and the wheels. Unlike bicycles, which have a rigid connection between the frame and wheels, leading to discomfort on rough roads, automotive control arms use a flexible connection with added shock absorption, significantly improving ride comfort and handling stability.
103
Share

Will stepping hard on the accelerator in N gear cause problems?

Stepping hard on the accelerator in N gear can cause problems and certain damage to the vehicle. Aggressively pressing the accelerator will subject some components in the engine to significant inertial forces, thereby shortening the engine's lifespan. If the engine has just started, revving it hard in neutral can also accelerate engine wear. Relevant details are as follows: Impact on engine reliability and lifespan: When the car is in neutral, the engine has no power output. At this time, stepping hard on the accelerator causes the engine speed to rise sharply, and the rapid acceleration of moving parts such as pistons and connecting rods generates substantial acceleration forces, subjecting them to significant alternating loads. The stress on the piston, piston pin, connecting rod, connecting rod bolts, and crankshaft may exceed that during normal operation. Hazards of stepping hard on the accelerator: When the accelerator is pressed aggressively, the speed increases sharply, and the lubrication of each friction pair cannot keep up, easily leading to faults such as cylinder scoring or valve damage. Therefore, neutral acceleration should be avoided. If the accelerator is pressed hard when the engine is cold, the damage to the car's engine will be even greater and non-negotiable, as the oil film covering the internal parts may not be fully formed. Aggressively pressing the accelerator can cause excessive wear on the engine's metal mechanical components. If the cooling system is not circulating properly, it can easily lead to engine overheating. Excessive wear of piston rings and cylinders can weaken airtightness, posing risks such as oil burning or even dry friction, potentially leading to cylinder explosion.
106
Share

What are the differences between the Mercedes-Benz GLC300 and 260?

The key differences between the GLC260 and GLC300 lie in their power and configurations. The GLC300 offers better configurations, enhanced comfort, and higher resale value. Apart from the vehicle configurations, there are also differences in engine tuning and power output. The GLC300 can reach a top speed of 235 km/h, while the GLC260 can only reach 222 km/h. Below are additional details: 1. Power: Both the GLC300 and GLC260 have a 2.0L turbocharged engine, but the former delivers more power. The GLC300 has a maximum horsepower of 245 HP and a maximum torque of 370 Nm, with a 0-100 km/h acceleration time of 6.9 seconds and a top speed of 235 km/h. The GLC260 has a maximum horsepower of 211 HP and a maximum torque of 350 Nm, with a 0-100 km/h acceleration time of 7.8 seconds and a top speed of 222 km/h. 2. Configurations: (1) Changes in the lighting system mainly include: The GLC300 features automatic steering headlights, automatic switching between high and low beams, and increased lighting width on rural roads. (2) Air conditioning: The GLC300 can automatically adjust the interior temperature and air conditioning fan speed based on sunlight intensity, offering a higher level of intelligence. (3) Interior and exterior air circulation: The GLC300's interior air pollution sensor can change the air circulation mode automatically based on the interior air quality. (4) Other aspects: The GLC300 has larger tires, a driver's seat and rearview mirror memory function, a keyless entry system, a hands-free trunk opening feature, LED ambient lighting, and more.
106
Share

What is the minimum ground clearance of the Touran L?

The minimum ground clearance of the Touran L is 120mm. The minimum ground clearance of a vehicle refers to the distance between the lowest point of the car's chassis and the ground when the vehicle is fully loaded. This measurement directly reflects the vehicle's ability to pass through complex road surfaces without obstruction and indicates its capability to traverse obstacles such as rocks and tree stumps without collision. A smaller ground clearance means a weaker ability to overcome obstacles. The Touran L is an MPV series model under SAIC Volkswagen, with dimensions of 4527mm in length, 1829mm in width, and 1659mm in height, and a wheelbase of 2791mm. In terms of configuration, this vehicle offers six major value-added optional packages, including features such as a panoramic sunroof, a seven-seat layout, and an integrated child safety seat, which are highly sought-after configurations.
107
Share

Geely Vision X3 Maintenance: Using Full Synthetic vs. Conventional Lubricants?

Geely Vision X3 maintenance requires changing the engine oil according to the viscosity recommended by the manufacturer. Use genuine engine oil with a viscosity that matches the engine's requirements. The grade must not be incorrect, as excessively high viscosity increases engine resistance and fuel consumption, while excessively low viscosity reduces sealing performance and results in insufficient power. Here is additional information: Automotive maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. The "SERVICE" indicator on the dashboard serves as a maintenance cycle reminder. When the ignition switch is in the ON position, the "SERVICE" indicator flashes, and it disappears after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the service reminder light should be reset.
107
Share

What is the fuel tank capacity of a sedan?

The fuel tank capacity varies depending on the vehicle model. Small cars typically have a fuel tank capacity of 35-45 liters, while mid-sized cars have a capacity of around 55-75 liters. Some large full-size SUVs may even exceed 100 liters. How to check the fuel tank capacity: Generally, you can observe the reading on the fuel gauge inside the car. Normally, the fuel gauge has 5-6 segments, with each segment representing the remaining fuel capacity in the tank. It is recommended to refuel when there are only two segments left to avoid running out of fuel while driving. Here is some related information about fuel tank capacity: The standard fuel tank capacity listed in the vehicle specifications is not the maximum capacity. According to international standards, liters (L) are used as the unit of measurement for fuel tank capacity, and different countries and regions have their own standards. In China, national regulations specify that the nominal fuel tank capacity must not exceed 95% of the actual capacity. This means the labeled capacity can be smaller but not larger than the actual capacity. Therefore, the actual fuel tank capacity is usually larger than the nominal capacity. With a full tank, the maximum driving range is typically 400-600 kilometers. The fuel tank size is generally proportional to the vehicle's fuel consumption, with larger tanks for more fuel-consuming vehicles and smaller tanks for more fuel-efficient ones, except for some off-road vehicles.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.