···
Log in / Register

What is the fuel consumption of Changan Oushang?

6Answers
GiaMarie
08/27/2025, 10:28:13 PM

8-9 liters per 100 kilometers. Additional information is as follows: 1. Features of the Changan Oushang X7 model: The Changan Oushang X7 is a compact SUV developed by Changan Oushang Auto, positioned as a premium urban SUV. The new vehicle is based on Changan's global R&D center's new modular MPA-2 platform, which supports the development of products with three energy forms: EV, hybrid, and traditional fuel vehicles. 2. Basic information about Changan Oushang: The Oushang X7 is equipped with a 1.5TGDI engine, delivering a maximum power of 178 horsepower (131kW) at 5500rpm and a maximum torque of 265N.m at 1450-4500rpm. It is paired with a wet 7DCT automatic transmission, which was independently developed by Changan and its UK R&D center.

Was this review help?
109
Share
Kaleb
09/09/2025, 03:52:49 AM

As an ordinary owner who has been driving the Changan Oshan X5 for over a year, I find the fuel consumption quite decent overall, averaging around 7 liters per 100 kilometers. In congested urban areas, it might spike to over 8 liters, especially during peak-hour traffic jams, but on the highway, it easily drops to just over 6 liters. The key factor affecting fuel consumption is driving habits—I always try to maintain a steady speed and avoid sudden acceleration or braking. Regular maintenance, like changing air filters and keeping tires properly inflated, also helps save a lot on fuel costs. Fuel consumption varies significantly between models. For example, the Oshan X7 has a slightly larger engine displacement and might consume close to 9 liters in city driving. I recommend checking actual test data rather than just relying on official claims when buying a car. Overall, this car's fuel efficiency is quite economical among domestic SUVs, making it cost-effective for daily commuting and suitable for budget-conscious families.

Was this review help?
19
Share
Expand All
DeIker
10/23/2025, 04:44:48 AM

I drive my Changan Oushan to work every day, covering dozens of kilometers, with an actual fuel consumption of around 8 liters on average. The difference in fuel consumption is significant under different road conditions. In urban areas with frequent traffic lights, it can easily rise to 9 liters, while on smooth suburban roads, it can drop below 7 liters. To save fuel, I've tried reducing load, avoiding sudden acceleration, and maintaining a steady speed of 60 km/h, which is the most fuel-efficient. Another tip: using air conditioning in summer increases fuel consumption by about half a liter, but heating in winter has little impact. Regular maintenance, such as engine cleaning and oil changes, also helps stabilize fuel consumption over time. Overall, the Oushan's fuel consumption isn't alarming, capping at around 500 yuan per month, making it suitable for budget-conscious commuters like me.

Was this review help?
17
Share
Expand All
DeColin
12/06/2025, 09:20:38 PM

From the perspective of engine performance, the fuel consumption of Changan Oshan models is quite reasonable. Take my Oshan Z6 for example, equipped with a 1.5T engine paired with a CVT transmission, it averages 7.5 liters per 100 kilometers. The smooth transmission design is key to reducing power loss, coupled with the vehicle weight being controlled under 1.5 tons, making it naturally more fuel-efficient. Driving style also has a significant impact: stop-and-go city driving consumes more fuel, while highway cruising can reduce consumption to 6 liters. Regularly checking tire pressure is important, as a 0.5 bar decrease in pressure can increase fuel consumption by about 1%, a detail often overlooked. Compared to vehicles in the same price range, Oshan performs moderately in fuel consumption control but stands out for its low practical costs.

Was this review help?
20
Share
Expand All
LaBrynlee
01/26/2026, 10:33:48 PM

Fuel consumption directly affects the wallet. I've been driving a Changan Oushang for three years, with an average monthly fuel cost of around 400 yuan, equivalent to a per-kilometer cost of approximately 0.6 yuan. In the city, fuel consumption is relatively high, about 8 liters or more, mainly due to traffic congestion and air conditioning usage. However, it becomes more economical during long-distance trips, dropping to 6.5 liters, as highway driving has less wind resistance and is easier to control. To save money, I recommend choosing a smaller displacement model like the Oushang X5, which has lower fuel consumption compared to the larger X7. Additionally, pay attention to driving habits: avoid driving during peak traffic hours and use navigation to bypass congested routes. Regular maintenance is essential, such as checking the air filter, as a dirty one can affect air intake and increase fuel consumption. Periodic inspections can save a lot. Overall, the Oushang performs well in fuel economy and is worth considering for salaried workers.

Was this review help?
12
Share
Expand All
MacMarcus
04/22/2026, 03:45:30 AM

From an environmental perspective, the fuel consumption performance of Changan Oushang is quite decent. Its mainstream models have an urban fuel consumption of around 8 liters, which is significantly more economical than older-generation vehicles, helping to reduce carbon emissions. When driving the Oushang X7, paying attention to driving habits such as smooth acceleration and avoiding sudden braking can lower fuel consumption to 7.5 liters. Additionally, opting for intelligent driving modes or choosing hybrid versions can further enhance energy efficiency. New models like the Oushang Z6 hybrid reportedly consume less than 5 liters of fuel. Vehicle weight and engine efficiency are crucial factors, with lightweight designs aiding in controlling fuel consumption. Weather also plays a significant role; driving at high speeds on windy days increases resistance, adding about 0.2 liters to fuel consumption. In summary, with proper maintenance and a green travel mindset, the Oushang serves as a viable daily commuter vehicle in terms of fuel sustainability, offering long-term cost savings and environmental benefits.

Was this review help?
11
Share
Expand All
More Q&A

How to solve ESP problem in car?

An ESP (Electronic Stability Program) warning light indicates a fault in the vehicle's stability control system. The most reliable first step is to use an OBD-II scanner to read the specific diagnostic trouble codes (DTCs), which will pinpoint the failing component and prevent unnecessary part replacements. This systematic approach addresses the majority of faults, which commonly stem from wheel speed sensors, the steering angle sensor, or the brake light switch. Persistently driving with the ESP light on significantly reduces the vehicle's active safety during cornering or on slippery surfaces. A weak or aging battery is a frequent, overlooked culprit. Automotive electrical systems require stable voltage. According to industry data, a battery voltage drop below 12.4 volts can cause modules like the ESP control unit to malfunction and log errors. Batteries older than three years should be load-tested. Physical inspection of the wheel speed sensors is critical. These sensors, located at each wheel, are exposed to road grime, salt, and metal debris. Contamination or damage can send erratic signals to the ESP computer. Cleaning the sensor tips and checking for damaged wiring harnesses often resolves intermittent issues. A faulty brake light switch, a simple and inexpensive part, is another prevalent cause. If the switch fails, the ESP system may interpret it as a braking error and disable itself. For vehicles like Audi or Volkswagen, specialized tools like VCDS (VAG-COM) provide deeper access than generic OBD-II scanners. They can read live data from the ABS/ESP module, such as individual wheel speeds and steering angle sensor readings in degrees, allowing for precise diagnosis. Sensor calibration, especially for the steering angle sensor, often requires this level of diagnostic capability after a battery disconnection or component replacement. Common Fault & Symptom Diagnostic Check Typical Fix Intermittent ESP/BAS/ABS lights Check battery voltage and age; scan for low-voltage codes. Clean battery terminals, charge, or replace battery if over 3 years old or failing load test. ESP light on with possible ABS activation Use scanner to read wheel speed sensor codes; visually inspect sensors for debris/damage. Clean sensor and reluctor ring; replace damaged sensor. ESP light on after battery work Scan for steering angle sensor fault codes (e.g., "implausible signal"). Perform steering angle sensor calibration via diagnostic tool. ESP/ABS lights on together Check brake light operation; scan for brake switch circuit codes. Replace faulty brake light switch. If basic troubleshooting does not clear the fault, professional diagnosis is recommended. A technician can perform advanced tests on the hydraulic control unit, yaw rate, and lateral acceleration sensors. Attempting complex repairs without proper tools and knowledge may lead to increased costs or compromise system safety.
154
Share

How do you trade in a car that is not paid off?

Yes, you can trade in a car with an outstanding loan, a common practice where the dealership pays off your old loan using the trade-in value. The process hinges on your equity position —the difference between your car's market value and the loan payoff amount. Positive equity acts as a down payment, while negative equity (being "upside down") is often rolled into the new loan, increasing its total cost and monthly payments. To execute this successfully, you must first obtain two precise figures: your payoff amount and your car's trade-in value . Contact your lender for the exact 10-day payoff quote, as it includes any accrued interest. For valuation, reference authoritative sources like Kelley Blue Book (KBB) or Edmunds for a baseline, but understand that a dealer's final offer will typically be 5-15% lower, reflecting their reconditioning and profit margin. Market data indicates that as of recent years, the average new car loan term exceeds 67 months, increasing the risk of negative equity in the early years of ownership. Calculate Your Equity Accurately This critical step determines your financial outcome. Use this simple framework: Scenario Condition Financial Implication Positive Equity Trade-in Value > Payoff Amount The surplus is applied as credit toward your new vehicle purchase. Negative Equity (Upside Down) Trade-in Value < Payoff Amount The shortfall is added to your new loan amount, financing the old debt. For example, if your payoff is $18,000 and the dealer offers $20,000, you have $2,000 in positive equity. Conversely, a $15,000 offer on the same loan creates a $3,000 deficit to be rolled over. Navigating Negative Equity Rolling over negative equity is feasible but costly. It immediately puts you in a deeper financial hole on the new loan. For instance, rolling $3,000 into a 60-month loan at 5% APR adds approximately $57 to your monthly payment and over $400 in additional interest. Lenders have limits on how much negative equity they will finance, often capping the combined loan-to-value (LTV) ratio at 125% for well-qualified buyers. You may need a larger down payment to offset the deficit and secure loan approval. The Dealership Payoff Process Once you agree on terms, the dealership handles the transaction. They will pay your lender directly, usually via a dealer draft within 7-21 days. Ensure you receive written confirmation of the payoff and verify with your old lender that the account is closed. Continue making payments until the payoff clears to avoid late fees. Any existing Gap insurance on the traded vehicle should be canceled for a potential prorated refund; note it does not transfer or cover carried-over negative equity. Strategic Timing and Alternatives The optimal time to trade in is when you have positive equity, often after the loan's midpoint. If you have negative equity, consider alternatives: making extra payments to reduce the principal before trading, selling the car privately (which typically fetches 10-20% more than a trade-in) to cover the loan, or keeping the vehicle longer to build equity. Always secure financing pre-approval from a bank or credit union before visiting the dealership to strengthen your negotiating position.
197
Share

How to wire a car amp?

Wiring a car amplifier correctly hinges on three core steps: running a fused power wire from the battery, establishing a solid ground connection to the chassis, and connecting remote and signal cables from the stereo. Using the correct wire gauge for your amplifier's power draw is critical to prevent voltage drop, overheating, and potential fire hazards. The installation revolves around several key connections. The power wire is the most crucial. It must be connected directly to the vehicle’s battery positive terminal and include an inline fuse placed within 18 inches of the battery. This fuse is a non-negotiable safety component that protects your vehicle's electrical system in case of a short circuit. Conversely, the ground wire must be attached to a clean, bare metal point on the vehicle’s chassis, ideally less than 3 feet from the amplifier. A poor ground is the most common cause of amplifier noise or failure. For control and audio signal, you’ll need a remote turn-on wire (typically a thin blue wire) from the head unit to switch the amp on/off with the stereo, and RCA cables to carry the audio signal from the head unit to the amplifier's inputs. If your factory stereo lacks RCA outputs, you must use a line output converter (LOC) to tap into the speaker wires and create a compatible signal. Choosing the proper wire gauge is not a suggestion but an electrical necessity, based on the amplifier's RMS power rating and the wire's length. Industry standards, such as those from the Consumer Technology Association, provide clear guidelines to ensure safe current capacity. The table below outlines the general consensus for typical amplifier installations in cars under 17 feet in wire length: Total Amplifier RMS Power Recommended Wire Gauge (AWG) Up to 250 Watts 10-gauge 250 - 500 Watts 8-gauge 500 - 1000 Watts 4-gauge 1000 - 1500 Watts 2-gauge 1500+ Watts 1/0-gauge Beyond the core wiring, managing noise and interference is paramount. Always route the power cable down one side of the vehicle (e.g., along the driver's side sill) and the RCA signal cables down the opposite side. This physical separation minimizes the chance of engine whine or alternator noise being induced into the audio signal. Secure all wires firmly with zip ties or loom, keeping them clear of moving parts, sharp edges, and excessive heat sources like exhaust components. Before starting any work, the single most important safety step is to disconnect the negative terminal of your car battery to eliminate the risk of electrical shorts or shocks.
204
Share

How to break a car finance contract?

Exiting a car finance contract is feasible through selling the vehicle, refinancing the loan, or voluntary termination, but each carries financial implications. The best path depends on your equity position—whether you have positive or negative equity—and your credit standing. If your car's current market value exceeds your loan payoff amount (positive equity), selling it is often the optimal solution. You can sell privately for a higher return or trade it in at a dealership for convenience, using the proceeds to clear the loan and potentially pocket the difference. Refinancing is a strategic move if your credit score has improved significantly or market interest rates have dropped since you secured the original loan. A new loan with a lower Annual Percentage Rate (APR) can reduce your monthly payment, while extending the loan term can also lower payments but typically increases total interest paid over time. For those struggling, a voluntary termination is a legal right under agreements like a Personal Contract Purchase (PCP) in many regions, including the UK. You can return the car if you've paid more than 50% of the total finance agreement amount, including interest and any balloon payment. However, the lender may charge for excess wear and mileage, and your credit score will be marked, showing the account settled but not fully as agreed. The most common hurdle is negative equity —owing more than the car's worth. Industry data suggests this affects 20-30% of trade-ins. To sell, you must cover this shortfall with cash, a personal loan, or by rolling it into a new car loan (increasing the debt on the next vehicle). Simply stopping payments leads to repossession, causing severe credit damage (your score could drop 50-100 points or more) and potential legal action for any remaining deficiency balance. Other options include requesting a payment deferral or loan modification from your lender, though these may extend the term and cost. For leased vehicles, lease transfer marketplaces facilitate taking over payments, subject to lender approval. The financial and credit consequences vary drastically by method. A clean sale or refinance has minimal credit impact. Voluntary termination or repossession causes significant, lasting harm to your credit profile. Always calculate your exact payoff amount and obtain a current vehicle valuation before deciding. Method Best For Key Action Primary Risk / Consideration Sell the Car Those with positive equity. Secure payoff quote, get car appraised, sell privately or to dealer. Must cover negative equity if present; private sale takes more effort. Refinance the Loan Borrowers with improved credit. Shop for new loan offers from banks/credit unions. Longer terms increase total interest; may have refinancing fees. Voluntary Termination PCP/HP customers past 50% paid. Notify lender in writing, arrange vehicle return. Major credit score impact; charged for excess wear/mileage. Lender Negotiation Temporary financial hardship. Contact lender early to request deferral or modification. May increase total loan cost; not a long-term solution.
241
Share

How do you unlatch a Graco car seat?

To unlatch a Graco car seat, you primarily press the red release buttons on the LATCH connectors and squeeze the handle on infant carriers. The exact method depends on your seat type (infant carrier, convertible) and installation mode (LATCH or seat belt). Always consult your specific model’s manual first, as mechanisms can vary. For Graco Infant Carrier Bases (LATCH System): Locate the red release buttons on the LATCH hooks, typically found between the car seat cushion and vehicle seat. Press one button fully to detach that hook, then repeat on the other side. If the strap is too tight, press the gray button on the front of the base to create slack. Finally, unhook the top tether from its anchor behind the vehicle seat. For Graco Infant Carriers (from the base): Find the release handle on the carrier's back, often near the child's head area. It's frequently colored red or orange. Firmly squeeze this handle while lifting the carrier straight up and out of the base. If the handle is obstructed by the canopy, gently pull the canopy forward for better access. For Convertible/All-in-One Seats Installed with LATCH: The process is similar to the base. Push the red buttons on the LATCH connectors to release them from the vehicle's lower anchors. Then, disconnect the top tether strap by pressing the release mechanism on the hook attached to the vehicle's tether anchor. For Bases or Seats Installed with a Seat Belt: Simply unbuckle the vehicle's seat belt. If the seat uses built-in lock-offs (common on Graco bases), you must open the lock-off mechanism to release the seat belt's tension before pulling the belt out. Troubleshooting Stubborn Connectors: If a LATCH hook is stuck, push down on the car seat itself to relieve pressure on the strap and hook. For J-hook style connectors, try twisting the hook sideways rather than pulling straight out. If the hook's release is stuck, press the gray slack-adjustment button while also flipping up any metal tab on the connector. Consistent issues may indicate the strap is overly tightened; loosening it slightly during future installations can help. The red release button is the universal standard for disengaging Graco's LATCH connectors. Market data and user manuals consistently show this design across nearly all Graco models from the past decade, emphasizing its role as the primary safety release. Forgetting to disengage the top tether is a common oversight that can hinder removal.
131
Share

How do I lower my car lease payment?

Lowering your car lease payment hinges on targeting three key negotiable parts: the vehicle's selling price, its projected future value, and the finance rate. By focusing on the capitalized cost , residual value , and money factor , you can systematically reduce your monthly obligation. The common mistake of negotiating only the monthly payment often leads to less favorable overall terms. Negotiate the Capitalized Cost First The capitalized cost is the vehicle's effective selling price. This is your primary leverage point. Dealers may focus on monthly payments, but you must negotiate the car's price as if you were buying it. Use online tools to determine the invoice price and average transaction price. A reduction of $1,000 in the cap cost typically lowers your monthly payment by roughly $28-$30 on a 36-month lease. Target Models with High Residual Values The residual value is the car's projected worth at lease-end, set by the leasing company. You pay for the depreciation—the difference between the cap cost and residual. A higher residual percentage means lower depreciation cost. For example, a vehicle with a 60% residual after three years is fundamentally cheaper to lease than one with a 50% residual, all else being equal. Industry data from sources like ALG and Kelley Blue Book can identify models known for strong retained value. Secure a Competitive Money Factor The money factor is the lease's interest rate. It's a decimal figure (e.g., 0.00125) that can be converted to an approximate APR by multiplying by 2400 (0.00125 = 3% APR). Always ask the dealer for the "buy rate," which is the base rate from the manufacturer. Dealers can mark this up for extra profit. Coming in with knowledge of current manufacturer subvented rates, often advertised as special lease deals, prevents this markup. Key Negotiation Target What It Is Direct Impact on Payment How to Improve It Capitalized Cost Negotiated selling price of the vehicle. Most direct impact . Lowering this reduces the amount financed. Research invoice price, get multiple dealer quotes, and negotiate this price first. Residual Value Projected value at lease-end (set by lessor). Critical . A higher % means you pay for less depreciation. Choose a make/model with historically strong resale value. Money Factor The interest rate for the lease. Significant. A lower rate reduces finance charges. Ask for the "buy rate"; leverage manufacturer incentive rates. Utilize Incentives and Structure Payment Wisely Manufacturers frequently offer lease cash or subsidized rates, especially on models with high inventory. These incentives directly reduce the capitalized cost. Avoid making a large down payment, often called a "capitalized cost reduction." While it lowers monthly payments, that money is unrecoverable if the car is stolen or totaled early in the lease. A smarter approach is to roll taxes and fees into the lease and keep your upfront cash. Final Tactics for an Optimal Deal Secure competitive bids from at least three different dealerships via email to create leverage. Choose a mileage limit that matches your actual driving; overestimating adds unnecessary cost. Forums like Leasehackr provide community-sourced data on recent deal structures, giving you a benchmark for what is achievable in the current market. This research turns you from a price-taker into an informed negotiator.
204
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.