···
Log in / Register

What is the fault when the entire Roewe RX5 has no power?

6Answers
JeremiahRose
09/02/2025, 02:57:56 AM

The reasons for the Roewe RX5 having no power: 1. It may be due to oxidation of the battery's positive terminal causing poor contact; 2. It could also be an issue with the negative grounding. After encountering this situation, it is recommended to go to a professional institution to have the circuit inspected by professionals, and then proceed with repairs. Relevant information about the Roewe RX5 is as follows: 1. Dimensions: The Roewe RX5 is a compact SUV under the Roewe brand, with a length of 4556 mm, width of 1855 mm, height of 1719 mm, and a wheelbase of 2700 mm. 2. Power: The Roewe RX5 is equipped with a 1.5-liter turbocharged engine across the entire lineup, with the model code 15e4e, delivering a maximum power of 124 kW, maximum torque of 250 Nm, maximum torque speed range of 1700 to 4300 rpm, and maximum power speed of 5500 rpm.

Was this review help?
109
Share
DiMason
09/14/2025, 10:13:19 PM

I also encountered a complete power loss in my Roewe RX5 before, probably due to a completely drained battery or a generator failure causing charging interruption. That time in an open parking lot, there was no response after inserting the key, not even the dashboard lit up, which caused me a lot of trouble. The main reasons include battery lifespan expiration (usually needs replacement every 3-5 years), generator belt loosening or damage (the battery drains quickly when parked), fuse blowout (especially the main power fuse), or short circuits and poor contact. Don’t overlook small details, like leaving the car lights on and draining the battery. It’s advisable to first measure the battery voltage yourself; if it’s below 12 volts, that might be the issue. If that doesn’t help, call for towing assistance immediately—don’t force-start the car to avoid burning the circuits. Regular maintenance should include checking for battery corrosion and generator output, with voltage tests at least once a year to avoid last-minute failures.

Was this review help?
9
Share
Expand All
DiMarcus
10/28/2025, 10:52:36 PM

Having repaired numerous Roewe RX5 models, total vehicle power loss is often caused by blown fuses or alternator failure. When owners complain about failure to start, I first check the fuse box for any melted main power fuses or loose battery terminals. Next, I verify if the alternator is malfunctioning, leading to battery discharge. The Roewe's complex electronic systems make wiring susceptible to short circuits from aging, particularly during rainy seasons when moisture accelerates corrosion. In such cases, don't panic—use a multimeter to check voltage for diagnosis, but avoid DIY disassembly to prevent accidentally triggering alarm systems. Regular maintenance is crucial: keep battery terminals clean and ensure all electronics are off before parking.

Was this review help?
10
Share
Expand All
MorganDella
12/11/2025, 10:04:30 PM

I had just started driving the Roewe RX5 when it suddenly lost all power, which really scared me and made my heart race. The usual causes are either a dead battery or wiring issues, such as the battery being completely drained and unable to supply power, or a blown fuse during startup. That time, I tried starting it multiple times with no response, so I had to call a friend to help test the voltage, and we found the battery was old and over-discharged. The lesson is not to leave the car parked for too long without use, as it accelerates battery wear. Also, learn to use simple tools to check for signs of battery corrosion. Remember, safety first—don’t delay seeking help.

Was this review help?
16
Share
Expand All
SanWalter
01/31/2026, 11:10:00 PM

A complete loss of power in the vehicle is commonly caused by battery failure or alternator malfunction. As an intelligent SUV, the Roewe RX5 has sensitive electronic components. If the key won't turn or the lights don't come on, it may indicate a main circuit break; the fuse box or loose connectors should be checked. This model features a relatively new system, but its design includes a protection mechanism that can trigger system shutdown due to voltage instability. Regular maintenance of the alternator is advised to avoid sudden stalling after long-distance driving, which can lead to cascading issues. It's recommended that owners develop the habit of periodically testing the charging system.

Was this review help?
4
Share
Expand All
VanEmilio
04/26/2026, 04:30:34 PM

It was really annoying when my Roewe RX5 suddenly lost all power while I was out for fun, probably due to a battery failure or the generator stopping. That time was particularly risky as I had my child with me. First, check the cause: if the battery terminals are dirty and have poor contact, they can discharge quickly; or if the generator belt is broken, it interrupts the charging process. As a simple emergency measure, try cleaning the battery terminals, but avoid repeatedly forcing ignition to prevent further damage. I learned my lesson and now check the vehicle's electrical shutdown status every week.

Was this review help?
11
Share
Expand All
More Q&A

How to Charge a 12V Battery?

12V battery charging method: Attach the red clamp of the charger to the battery's positive terminal marked with a plus sign, and the black clamp to the negative terminal marked with a minus sign. Starting batteries sometimes become discharged due to heavy usage or prolonged storage, so they should be periodically removed from the equipment and recharged in a charging area. Supplementary charging is generally performed once a month to enhance reliability and extend service life. It is advisable to perform a supplementary charge before winter. Battery charging precautions: Initial charging: The first charge of a battery is called the initial charge, which significantly impacts the battery's lifespan and charge capacity. Insufficient charging results in lower charge capacity and shorter lifespan, while overcharging improves electrical performance but also shortens lifespan. Therefore, new batteries should undergo initial charging carefully. Dry-charged lead-acid batteries: For dry-charged lead-acid batteries, as per the user manual, if used within two years of storage, simply add the specified density of electrolyte and let it stand for 15 minutes before use without charging. However, if stored for more than two years, partial oxidation may occur on the plates. To improve charge capacity, a supplementary charge of 5-8 hours is recommended before use. Scheduled charging: When not in use for extended periods, aim to perform a health charge once a month or discharge to 50% after full charge. The optimal ambient temperature for battery charging is 25°C, which is difficult to achieve in cold winters, so indoor charging is preferable. If conditions don't permit, choose to charge during sunny daytime hours to enhance battery activity and reduce range loss.
110
Share

How to Remove a Car Washer Nozzle?

Introduction to the method of removing a car washer nozzle: Generally, washer nozzles come with reverse clips. You can press the reverse clips on both sides with a flat tool to remove the nozzle. Wipers, also known as windshield wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. Due to legal requirements, almost all cars are equipped with wipers. Solutions for a clogged washer nozzle: 1. Check if your car's washer fluid reservoir has water. Ensure there is water before wiping the windshield; otherwise, it may burn out the wiper motor. 2. If the washer fluid reservoir has water and the motor is working, but the wipers are not spraying water, the nozzle may be clogged. 3. Take a paperclip, straighten it, and gently insert it into the nozzle, stirring back and forth. 4. Choose a paperclip with a diameter suitable for the nozzle's outlet hole size. Avoid using excessive force, as it may damage the outlet hole. 5. Avoid dry wiping the windshield. Always spray water while wiping to prevent scratches on the glass.
101
Share

How Many Liters of Antifreeze Are Generally Needed?

Generally, antifreeze requires about 5-7 liters. The amount of antifreeze to be added varies for each vehicle. After adding antifreeze, you can check the scale on the auxiliary water tank. Typically, there are two marks on the auxiliary water tank: one for the maximum level and one for the minimum level. The antifreeze must be between these two marks—neither too much nor too little. Below is more detailed information: 1. The engine's antifreeze must have characteristics such as freeze protection, boil-over prevention, corrosion resistance, scale prevention, and no foam formation, and it should not be affected by seasons or regions. Among these, the freezing point and boiling point are the basic indicators of antifreeze. 2. The coolant is prepared by mixing antifreeze with water in a certain ratio. Automobile manufacturers usually specify the mixing ratio for different low-temperature antifreeze grades in the user manual and also designate the type of antifreeze, which should not be mixed. The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze functionality. Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking.
116
Share

What does the P in automatic transmission mean?

P stands for Parking—the parking gear, where P is the abbreviation. After parking, it is necessary to engage the P gear to prevent the vehicle from rolling, especially when parking on a slope. The general method to engage P gear is to press the brake pedal and wait until the vehicle comes to a complete stop before shifting or using the electronic button for models equipped with one. Automatic transmissions have the following gears: 1. P gear: Represents the parking gear. When parking the vehicle, shift into P gear, including when shutting off the engine or during prolonged idling. 2. R gear: Represents the reverse gear. Shift into R gear when reversing the vehicle. 3. N gear: Represents the neutral gear, which is the same as the neutral gear in manual transmissions. It can be used for short-term parking. 4. D gear: Represents the drive gear. When shifted into this gear, the vehicle moves forward. In this gear, the transmission automatically shifts between 1st and the highest gear based on the vehicle's speed and throttle conditions. 5. S gear: Represents the sport mode. When shifted into this gear, the transmission delays shifting, keeping the gear at higher RPMs for longer to increase vehicle power, though this naturally consumes more fuel.
116
Share

What is the correct method to check car engine oil?

Correct methods to check car engine oil include the smell test, the rub test, the color test, and the light test. The engine needs sufficient oil for lubrication, but more is not always better. Insufficient oil can cause serious damage to engine components due to poor lubrication. Correct methods to check car engine oil: Smell test: Pull out the dipstick and bring it close to your nose. If there is a strong acidic or foul smell, it indicates the oil has deteriorated and should be changed. Rub test: Take some old oil and rub it between your thumb and forefinger repeatedly. Good-quality oil will feel smooth, produce little residue, and have no gritty feeling. If you feel impurities, poor viscosity, or even a rough texture, it's time to change the oil. Color test: Place a few drops of old oil on a clean white filter paper. After the oil spreads, good-quality oil will leave no powder, feel dry and smooth to the touch, and show a clear yellow diffusion ring. If the oil appears dark brown with visible impurities, it should be replaced. Light test: Hold the dipstick at a 45-degree angle under light and observe the oil droplets. If you can clearly see no metal particles, the oil is still good. If there are many particles, the oil should be changed.
109
Share

Can an automatic car be shifted into neutral while driving?

Automatic cars should not be shifted into neutral while driving. Here are the reasons: 1. Shifting an automatic car into neutral while driving will reduce the vehicle's braking force, which can easily lead to rear-end collisions. When the car is coasting in neutral, the connection between the engine and the drive wheels is lost, and the car moves forward solely by inertia. In emergency situations requiring braking, all braking force must be provided by the brakes alone. When coasting in gear, the engine itself provides some braking effect, which, combined with the brakes, shortens the braking distance. Additionally, coasting in neutral can easily cause the engine to stall, leading to failure of the brake booster and reduced braking performance. 2. Shifting into neutral does not save fuel and can sometimes even consume more fuel, which is related to the working principle of electronic fuel injection engines. Electronic fuel injection engines can determine the amount of fuel injection based on the computer program. When coasting in gear, if the driver releases the accelerator, the computer will put the car into coasting mode, during which the engine does not inject fuel for a long period. However, if coasting in neutral, the computer will put the car into idle mode, and the engine continues to inject fuel. This is why coasting in neutral sometimes consumes more fuel.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.