···
Log in / Register

what is the fastest car on csr2

5Answers
DiReed
12/20/2025, 11:01:27 AM

Based on the current Tier 5 car roster and community-driven time trials, the Koenigsegg Jesko Absolut is widely considered the fastest car in CSR2 for beating the final boss, Tempe5t 3 Tier 5, and setting record times on the 1/2 mile drag strip. Its dominance comes from an unparalleled combination of extreme top speed and rapid acceleration, allowing it to complete the race in under 6.8 seconds when fully upgraded and tuned correctly.

The key to its performance is achieving a perfect start, followed by very early and perfect shifts to get into the car's highest gear quickly, maximizing its speed potential. It's important to note that "fastest" can be subjective based on the specific race or update, but the Jesko Absolut consistently tops the leaderboards for the game's most challenging events.

Here’s a comparison of some top-tier Tier 5 cars to illustrate the performance gap. The time represents an optimal 1/2 mile run.

Car ModelApproximate 1/2 Mile Time (Fully Upgraded)Key Strength
Koenigsegg Jesko Absolut6.708 secondsUnmatched top speed
Koenigsegg Gemera6.730 secondsExcellent acceleration
Bugatti Bolide6.740 secondsHigh downforce, great handling
SSC Tuatara6.750 secondsStrong all-around performer
Hennessey Venom F56.760 secondsCompetitive acceleration

While the Jesko Absolut is the peak, cars like the Gemera and Bolide are incredibly close and can be easier to obtain or upgrade. Your choice might also depend on your shifting style; some cars are more forgiving than others. Ultimately, securing and maxing out the Jesko Absolut is the goal for any player seeking the absolute fastest time.

Was this review help?
113
Share
McLorenzo
12/27/2025, 08:34:18 PM

Honestly, for just grinding through the daily races and winning most stuff, you don't need the absolute fastest. My fully upgraded Hennessey Venom F5 gets the job done every time. It's way easier to drive than the Jesko—less fussy with the shifts. I can nail a perfect start and not worry too much about the next gear changes. It's plenty fast enough to win and a lot more fun because you're not restarting a race ten times to get the shift pattern perfect.

Was this review help?
12
Share
Expand All
VonKira
01/04/2026, 05:28:02 AM

From a resource perspective, the "fastest" car is the one you can actually max out. I saved up my Elite Customs tokens for months to fully upgrade my Bugatti Bolide. A car isn't fast if it's sitting in your garage with only stage 3 upgrades. The Bolide is a monster when elite maxed and is consistently a top-3 car. It’s a smarter investment than chasing a car you might not be able to build properly for a long time.

Was this review help?
9
Share
Expand All
McPeyton
01/11/2026, 05:22:14 PM

It's all about the shift pattern. The Koenigsegg Gemera can actually beat the Jesko Absolut if you master its specific sequence. You need a perfect start, then immediately shift to 2nd gear, and hit nitrous in 3rd. It’s tricky, but when you get it right, the acceleration is explosive. So the fastest car can be the one you're best at driving, not just the one with the highest stats on paper. Practice is everything.

Was this review help?
1
Share
Expand All
StSophie
01/18/2026, 05:52:12 PM

Check the leaderboards for the Elite License. The cars people use to set those insane times are your answer. Right now, it's overwhelmingly the Jesko Absolut. But the game updates constantly. A new car could dethrone it next season. The real trick is staying active in a good crew that shares info, so you know what to pull for when it appears in a event or rare imports. The meta is always changing.

Was this review help?
14
Share
Expand All
More Q&A

What is the difference between horsepower and torque?

The differences between horsepower and torque are: 1. Different meanings: Horsepower is used to measure how much work an engine can do per unit of time; torque is used to measure how much moment force an engine can output in a single work cycle. 2. Different units: The unit of horsepower is Newton-meter; the unit of torque is Newton-meter. Both horsepower and torque are parameters of an engine. Other parameters of an engine include: 1. Power: Refers to the amount of work an object can do per unit of time; 2. Number of cylinders: Refers to the number of cylinders in an engine; 3. Displacement: Refers to the volume of fluid inhaled or expelled per stroke or cycle; 4. Piston stroke: Refers to the distance a piston travels between the top and bottom dead centers in one movement.
109
Share

Can a Flooded Car with an Undamaged Engine Still Be Driven?

A flooded car with an undamaged engine can still be driven, but if the vehicle stalls during water crossing, do not attempt to restart it to avoid engine damage, as insurance companies may deny claims. Causes Component Rust: Water-soaked vehicles are highly prone to rusting of body components, shortening their lifespan and reducing safety performance. Causes Short Circuit and Stalling: Flood-damaged vehicles may experience wire corrosion and rust, leading to sudden stalling or even spontaneous combustion due to short circuits while driving, with potentially disastrous consequences. Expensive Repair Costs: Repairing flood-damaged vehicles can be extremely costly. In cases of severe water ingress, repair expenses may exceed 50% of the vehicle's original value.
117
Share

Reasons for Squeaking Noise When Pulling the Handbrake?

Due to the high frequency of brake usage, related components are constantly in a state of consumption and wear, with the rate of consumption and degree of wear closely related to the driver's habits. Sometimes, abnormal noises may occur when using the handbrake. Below is relevant information about the brakes: 1. Causes of abnormal noise: Issues with the brake shoes of the rear drum brakes; gaps at the handbrake cable fixing points causing friction; the material of the brake shoes, where the added metal components are too hard; poor assembly of the handbrake shoes and related accessories; possible abnormal noise when the ratchet is not fully engaged and operated again; caused by the handbrake return mechanism sticking; deterioration of the handbrake cable's elasticity. 2. Summary: The sounds from the brake system can be divided into two situations: one is caused by the handbrake return mechanism sticking, and the other is due to uneven friction surfaces between the brake shoes and the disc. The latter situation generally can only be addressed by grinding the brake shoes.
111
Share

What Causes Steering Column Noise?

Steering column noise can be caused by aging steering tie rods, steering gear failure, aging power steering belts, etc. Aging Steering Tie Rods: Worn steering tie rod ball joints can create play in the tie rods, leading to steering wheel noise. The steering tie rod ball joints need to be replaced, but remember to perform a wheel alignment after replacement. Steering Gear Failure: If you hear noise when turning the steering wheel and the steering feels noticeably uneven, it may be due to excessive gear wear in the steering mechanism causing excessive play. Replacing the steering gear should resolve the issue. Aging Power Steering Belt: Improper tension or aging of the power steering belt can cause noise. For mechanically hydraulic power steering systems, improper belt tension or aging belts can lead to noise. Adjusting or replacing the belt should fix the problem.
116
Share

How many kilometers per day is appropriate for a new car during the break-in period?

There is no strict rule; you can drive as much as you want. The break-in period for a new car is generally 1,000-1,500 kilometers. Initial recommendations: During the early stage of the break-in period, when the mileage is below 500 kilometers, it's best not to drive too fast. Maintain a speed of 40-60 km/h, and keep the engine RPM below 2,200 for optimal performance. Mid-term recommendations: When the mileage reaches around 500-1,000 kilometers, which is the mid-term of the break-in period, increase the speed to 60-60 km/h, with the engine RPM below 2,500 for the best results. This helps promote the break-in process. Later-stage recommendations: When the mileage reaches around 1,000-1,500 kilometers, marking the later stage of the break-in period, you can increase the speed to below 80-60 km/h. The break-in process should develop gradually, and the engine RPM should not exceed 3,000.
102
Share

Is a car inspected twice a year after 15 years?

After 15 years, a car is inspected twice a year. Here is additional information: 1. Vehicle inspection regulations: Commercial passenger vehicles are inspected once a year within 5 years, and once every 6 months after 5 years. Trucks and large or medium-sized non-commercial passenger vehicles are inspected once a year within 10 years, and once every 6 months after 10 years. Small and micro non-commercial passenger vehicles are inspected once every 2 years within 6 years, once a year after 6 years, and once every 6 months after 15 years. 2. Consequences of failing to undergo annual inspection on time: Vehicles that do not undergo annual inspection on time are not allowed on the road, and if driven, the owner will be penalized with 3 points and a fine. In the event of a traffic accident involving a vehicle that has not undergone annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.