How to remove the maintenance light of JAC S2?

[DelElaina]

Method to remove the maintenance light of JAC S2: First, turn on the ignition switch of the JAC S2, and you will see the maintenance light on the center console after ignition; then turn off the ignition switch and hold down the reset or setting button; at this time, turn on the ignition switch of the JAC S2 again, and after about 5 seconds, the maintenance indicator light will go out, then release the reset or setting button. In terms of appearance, the JAC S2 has redesigned the fog light area and adopted chrome trim for wrapping, while the front and rear light clusters remain unchanged in design. In terms of configuration, the JAC S2 Zhiqu series is equipped with the JCONNET car networking system, supporting four major functions: cloud upgrade, cloud query, cloud control, and cloud diagnosis.

[Olga]

Last time I drove the Jianghuai S2, I also encountered this issue and fixed it quickly myself. After turning off the engine, hold down the TRIP button on the dashboard without releasing it, then turn the key to the ON position (the state where it doesn’t self-start). Watch the maintenance light blink a few times, and it will turn off—then you can release the button. The whole process takes just about 10 seconds. Why reset it? Because after servicing the car, you need to clear this reminder to stop it from beeping constantly, which can be quite annoying. Just remember to check if the light is actually off—if not, you might have pressed the button too quickly, so just repeat the process. Regularly resetting it helps remind you of the next service time, ensuring you don’t miss an oil change and protecting the heart of your car.

[EmeryRose]

Clearing this maintenance light is actually a built-in service reminder. First, turn off and lock the vehicle to ensure a quiet environment; then press and hold the TRIP button on the dashboard while turning the key to the ON position; wait patiently until the light stops flashing, then release the button and the light will disappear. The reset is to restart the maintenance interval timer, reminding you to change filters or oil on time. Once I forgot to do it, the light kept blinking, which affected my driving mood. It's recommended to regularly check tire pressure and oil level after resetting, combined with professional maintenance to extend the vehicle's lifespan. If the button doesn't work, try restarting the car or checking the fuse to ensure the system is functioning properly.

[EmmanuelLynn]

Here are multiple ways to resolve it: You can do it yourself by pressing the TRIP button combination, turning off the car, then pressing the buttons while turning on the ignition until the light goes off. For a hassle-free option, plug in an OBD-II scanner to the diagnostic port and select the reset option to clear it. If you're not familiar with these methods, just visit a repair shop and pay a small fee to have it done. After resetting, the maintenance light won't bother you anymore, but don't neglect the actual maintenance tasks, such as checking the oil and filter every 5,000 kilometers. Remember to operate carefully to avoid accidentally changing other settings, ensuring your car stays in top condition for a worry-free drive.