···
Log in / Register

What is the failure rate of the Chery Tiggo 8 Plus?

2Answers
DeMargaret
09/06/2025, 10:34:06 PM

Chery Tiggo 8 Plus has numerous quality issues, such as dashboard noise and interior noise. Below is an introduction to the Chery Tiggo 8 Plus: 1. Model: The Tiggo 8 PLUS is a mid-size SUV under Chery Automobile. 2. Design: The Tiggo 8 PLUS features a dual-screen design and offers 1.5T/1.6T engine options. The 1.5T engine + 48V mild hybrid system is one of the highlights of this model, with a maximum horsepower of 156. 3. Transmission: It is paired with a CVT continuously variable transmission, with a combined fuel consumption of 6.4L per 100 km. The 1.6T engine is matched with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 197 and a combined fuel consumption of 6.87L per 100 km.

Was this review help?
114
Share
MacJames
05/09/2026, 07:30:23 AM

According to the complaint data from Chezhiwang: the average number of faults per 100 vehicles for the Tiggo 8 Plus is around 28, similar to that of the Haval H6. Last year, there was a concentrated batch of complaints about lagging infotainment systems, which were resolved after system upgrades. Engine noise issues were mainly reported in early models of the 1.6T version, but the newer models have improved bracket structures. If you're considering purchasing, it's advisable to choose a vehicle within five years, and pay attention to checking whether the wiring harness connectors are rusty. Also, test the sunroof for any unusual noises during rainy days.

Was this review help?
14
Share
Expand All
More Q&A

What are the methods to eliminate formaldehyde in car interiors?

Methods to remove formaldehyde in the car include: 1. Develop the habit of driving with windows slightly open to maintain fresh air circulation and accelerate the release of formaldehyde. 2. Use activated carbon to absorb formaldehyde. 3. Use an air compressor to atomize and spray solvents inside the car. 4. Use water-based disinfectants in the car. 5. Visit a car maintenance center for negative ion deodorization services. Methods to detect formaldehyde include: 1. Using a formaldehyde detector to accurately measure formaldehyde levels. 2. Using a formaldehyde self-test kit for an economical and convenient option. 3. If you detect a pungent odor in the car, harmful gases including formaldehyde may be present.
108
Share

Why is the paint surface not smooth like matte?

If the car paint is not smooth and has a matte surface, it may be due to an oxidation layer on the car body. Polishing and glaze sealing can be performed. Relevant information is introduced as follows: If an oxidation layer appears on the car paint, polishing is required, and the effect will be better after polishing followed by glaze sealing. However, if it is a new car, polishing is not recommended, and coating is better than glaze sealing. Polishing is a method to remove scratches and rough areas on the car paint surface using polishing wax and a polishing machine. Polishing can grind off the aging paint film, allowing a new paint film to form and restore the paint's brilliance. Waxing or glaze sealing after polishing can achieve more ideal results.
115
Share

Where Should a Fire Extinguisher Be Placed in a Car?

Fire extinguishers in a car can be placed in the following locations: 1. Inside the glove compartment. 2. Next to the seat. 3. In the trunk. The storage environment temperature for car fire extinguishers should be within the range of -10 to 45 degrees Celsius, and the placement location should be kept dry and ventilated to prevent the extinguisher from getting damp and corroding. Precautions for using a fire extinguisher include: 1. Do not cover the extinguisher with objects; it should be easily accessible for quick retrieval. 2. Fire extinguishers are only suitable for putting out initial fires. 3. Use the extinguisher correctly. 4. Check the extinguisher's pressure once a month. 5. Fire extinguishers have an expiration date; they should be configured and replaced as required.
117
Share

How to Read Tire Specification Parameters?

Tire specifications are labeled on the sidewall in the order of "tire width, aspect ratio, rim diameter, load index, and speed rating." For example, if the tire specification is 195/55/R15 85V, it means the tire width is 195mm, the aspect ratio (section height to width ratio) is 55%, it is a radial tire (R) suitable for a 15-inch rim diameter, the load index is 85 (indicating a maximum load capacity of 515 kg), and the speed rating is 240 km/h. Relevant information is introduced as follows: 1. Tire width is one of the factors affecting the vehicle's fuel consumption. The wider the tread, the larger the contact area with the ground and the greater the friction. Wide tires tend to consume more fuel but offer stronger grip and better handling. Conversely, narrow tires have lower fuel consumption and a lighter driving feel, but the smaller contact area with the ground results in weaker grip. 2. Most cars on the market today use tires with small widths, small inner diameters, and high aspect ratios. Tires with high aspect ratios have longer sidewalls, which generally provide better comfort. The rim, commonly known as the wheel, consists of the rim and the spokes, which can be one-piece, permanently connected, or detachable. The nominal width and diameter of the rim are measured in inches. 3. The load index indicates the maximum load a tire can bear. The higher the value, the greater the load capacity. The speed rating refers to the maximum speed the tire can achieve. By checking the speed symbol and the corresponding speed table, you can determine the tire's maximum speed.
109
Share

Does a Leaking Shock Absorber Need to Be Replaced?

A leaking shock absorber needs to be replaced. The shock absorber and spring together form the suspension system. Oil leakage indicates that the shock absorber is malfunctioning or failing. Failure not only affects ride comfort and vehicle handling but can also cause the car to pull to one side, posing a safety hazard, especially at high speeds. Relevant information is as follows: The main function of a shock absorber is to suppress the rebound of the suspension spring after absorbing shocks and to mitigate impacts from the road surface. When a car travels over uneven roads, the suspension spring filters out road vibrations, but the spring itself continues to oscillate. The shock absorber is designed to control this spring oscillation.
120
Share

What to Do When an Automatic Transmission Car Runs Out of Battery?

If an automatic transmission car runs out of battery, you can use jumper cables to start it. The method for connecting car battery jumper cables is as follows: Bring the fronts of the two cars close together, connect one end of the red cable to the positive terminal of the dead car's battery, and the other end to the positive terminal of the rescue car. Then, connect the black cable to the negative terminal of the rescue car and the other end to the negative terminal of the dead car. Once the cables are connected, start the rescue car first, then start the dead car. Relevant information is as follows: When performing operations on the battery, both the dead car and the rescue car must remain turned off. The order for connecting the jumper cables is to first connect the positive terminal of the dead car to the positive terminal of the rescue car, and then connect the negative terminal of the dead car to the negative terminal of the rescue car.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.