···
Log in / Register

What is the engine speed of the Mistra at 120 km/h?

6Answers
AllisonAnn
09/01/2025, 12:24:33 AM

When the Mistra is running at 120 km/h, its engine speed is 2200 rpm. Introduction to Engine Speed: The engine speed is related to the number of work cycles per unit time or the effective power output of the engine, meaning the effective power of the engine varies with different speeds. Automobile Speed Range: Different vehicle models have different idle speeds due to variations in engines. Generally, the idle speed ranges between 500 and 850 rpm, while the idle speed during a cold start can be around 1500 to 2000 rpm. Once the engine coolant temperature returns to 90 degrees, the idle speed will stabilize within the specified range.

Was this review help?
112
Share
DallasMarie
09/13/2025, 03:10:02 AM

I've been driving the Mistra 1.8L automatic model for several years, often cruising at 120 km/h on the highway. At this speed, the engine RPM typically fluctuates between 2000 and 2200 rpm, with smooth gear shifts and minimal noticeable vibration. When the car is lightly loaded or on flat roads, the RPM tends to be on the lower side; however, when going uphill or fully loaded, it may rise to around 2300 rpm, accompanied by a slightly louder engine noise, though still within acceptable levels. Maintaining this driving habit is beneficial for fuel economy, achieving approximately 6 liters per 100 km, which is significantly more efficient than city driving. It's advisable to regularly check the vehicle's condition to ensure stable RPM. Variations may exist between different models, such as turbocharged versions offering more efficient RPM control, so owners should adjust their driving habits based on their actual experience.

Was this review help?
15
Share
Expand All
DelGia
10/27/2025, 03:57:12 AM

As someone who has used many Hyundai models, I've noticed that the Mistra's engine speed typically ranges between 2000-2300 RPM at 120 km/h, depending on whether it's a naturally aspirated or turbocharged engine. For example, the 1.8L naturally aspirated engine paired with a six-speed automatic transmission maintains around 2100 RPM during steady cruising, though this varies with road gradient - lower on flat roads but rising to approximately 2400 RPM when climbing, which affects efficiency. Excessively high RPM increases noise and fuel consumption, while too low may cause gear shifting issues, so it's important to monitor the dashboard closely. Significant RPM fluctuations should prompt checks of tire pressure or transmission fluid levels. Maintaining proper RPM over time can extend engine life, and I've found performance improves after the new car break-in period.

Was this review help?
15
Share
Expand All
June
12/10/2025, 03:13:37 AM

I usually drive my Mistra to work on the highway at 120 km/h, with the RPM generally between 2000-2200. In the city, the RPM is higher when driving slowly, but it drops on the highway, making the engine feel more relaxed and saving some fuel, averaging around 5.5 liters per 100 km. If it's windy or the car is fully loaded, the RPM occasionally reaches 2500, with noticeable noise but minimal impact. Driving habits are crucial; smooth acceleration and avoiding sudden throttle inputs help maintain a stable RPM range. Over time, I've noticed that keeping the engine well-maintained results in more stable RPMs.

Was this review help?
13
Share
Expand All
Gael
01/30/2026, 09:32:12 PM

When driving the Mistra at a highway speed of 120km/h, the engine speed is approximately 2100 RPM, which is an empirical value based on the 1.8L engine paired with an automatic transmission. The actual engine speed may be affected by external factors, such as slightly increasing in low temperatures or varying with undulating road conditions. I've noticed that maintaining this speed steadily on the highway results in a quieter ride, reducing driver fatigue. It is recommended that owners pay attention to changes in the tachometer during routine maintenance to detect abnormalities early, such as fuel quality issues or carbon buildup effects. Safe driving principles include controlling engine speed to avoid overloading the engine.

Was this review help?
20
Share
Expand All
CadenLee
04/25/2026, 03:21:55 PM

After driving the Mistra for years, I've noticed that at 120 km/h, the RPM usually fluctuates between 2000-2400, depending on the engine type; the 1.6T turbocharged version may even drop to around 1900 RPM for better efficiency. Lower RPM during highway cruising helps save fuel—approximately 0.5 liters per 100 km—but expect more fluctuations in rainy conditions or uphill driving. Developing a habit of gentle throttle input can optimize RPM balance, reduce noise levels, and enhance driving comfort. Transmission maintenance intervals directly impact this performance, so timely fluid changes are recommended.

Was this review help?
4
Share
Expand All
More Q&A

How to Determine Insufficient Car Coolant?

Methods to determine insufficient car coolant are: 1. Start the vehicle, the system will begin self-check; 2. Check the vehicle dashboard, the low fluid indicator light will illuminate. Functions of coolant include: 1. Preventing radiator cracking and engine cylinder block freezing due to coolant solidification during cold weather parking; 2. Preventing metal component corrosion and rubber part aging; 3. Reducing scale formation to avoid clogging circulation pipes and affecting cooling system performance; 4. Preventing overheating to maintain proper engine operating temperature; 5. Lubricating water pumps, thermostats and other components. Coolant, formally called antifreeze coolant, consists of water, antifreeze agents and additives, and can be classified into alcohol-based, glycerin-based and ethylene glycol-based types according to different antifreeze components.
118
Share

Is the engine of the Bestune B70 domestically produced?

The engine of the Bestune B70 is domestically produced. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW at 5,500 rpm and a maximum torque of 258Nm. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. The vehicle features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. The Bestune B70 is classified as a mid-size sedan, with body dimensions of 4,810mm in length, 1,840mm in width, and 1,455mm in height, along with a wheelbase of 2,800mm. It has a fuel tank capacity of 50 liters and comes with 225/50R18 tires.
103
Share

What does the first and second maintenance mean?

The first and second maintenance refers to secondary maintenance or secondary servicing, which includes the following items: 1. Replace engine oil and oil filter; 2. Replace air filter; 3. Inspect spark plugs; 4. Replace fuel filter; 5. Top up brake fluid; 6. Replace transmission oil; 7. Clean throttle body; 8. Clean fuel injectors; 9. Inspect tires and braking system; 10. Replace cabin air filter; 11. Replace engine belt. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing.
112
Share

What is the method for replacing spark plugs?

The method for replacing spark plugs is: 1. Remove the engine cover and unscrew the fixing screws of the high-voltage line terminals; 2. Remove the high-voltage line terminals, loosen the spark plugs, then insert the soft tube from the high-voltage line terminal into the combustion chamber and pull out the spark plugs; 3. Align the new spark plugs with the screw holes and tighten them with tools. Symptoms of spark plug failure include: 1. Causing the engine to produce a large amount of carbon deposits; 2. Difficulty in starting the car; 3. Excessive exhaust emissions; 4. Insufficient power; 5. Black smoke from the exhaust pipe; 6. Idling vibration; 7. Electrode melting with the insulator turning white; 8. Electrode rounding with scars forming on the insulator.
106
Share

Is the tire pressure the same for front and rear tires of a car?

Is the tire pressure the same for front and rear tires of a car? The normal tire pressure is usually between 2.2 and 2.5 bar. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. The functions of tires are: 1. To prevent severe vibration and early damage to automobile parts, adapt to the high-speed performance of the vehicle and reduce noise during driving; 2. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 3. To transmit traction and braking torque, ensuring good adhesion between the wheel and the road surface, thereby improving the car's power, braking, and passability.
107
Share

Can I still drive if the car dashboard shows 'change oil immediately'?

If the car dashboard displays 'change oil immediately', you should not continue driving. The method for changing the oil is as follows: 1. Use a jack to lift the vehicle, locate the oil drain bolt, and unscrew it to drain the oil; 2. After removing the oil filter, place a container underneath it; 3. Install a new oil filter and add new oil. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To cool and lower temperatures; 3. To clean and remove contaminants; 4. To cushion and absorb shocks; 5. To prevent rust and corrosion. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve any deficiencies in the base oil's performance.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.