What is the difference between tire 100V and 100W?

Do I Need to Wait for the Red Light When Making a U-Turn?

Yes, according to the Road Traffic Safety Law, you can make a U-turn when there is no traffic light or no sign prohibiting U-turns, provided that it is safe to do so. However, when there is a traffic light, you must follow the traffic light signal. Forcing a U-turn will result in penalties. You can make a U-turn under the following circumstances: 1. When the vehicle has not crossed the stop line, you can make a U-turn on the side with a dashed line. 2. If the vehicle has crossed the stop line, you must wait for the green light to make a U-turn. 3. When the road sign indicates that left turns are allowed on red, you can make a U-turn. 4. If there is a dedicated U-turn signal light, you can make a U-turn according to the U-turn light.

105

Share

Why Does Fog Form on the Car Windows When It Rains?

Fogging on car windows during rain is primarily caused by the atomization of air inside the vehicle. This phenomenon occurs when the glass is cold while the air inside the car is warm, leading to the release of heat and the formation of tiny water droplets. Solutions: 1. Open the windows for ventilation: Fogging inside the car is due to high humidity in the cabin. One method is to open the windows for ventilation, while another is to turn on the air conditioning with cold air directed towards the windshield, which quickly eliminates the fog. 2. Wipe and clean: Turn on the air conditioning to adjust the interior temperature, removing the fog inside the car and causing the frost on the windows to melt quickly. Applying a thin layer of glycerin or alcohol on the windshield can prevent frost formation on the glass surface for a short period. Dissolving dishwashing detergent in water and applying it with a clean cloth to the inside of the windshield will produce many bubbles. Wait a moment, and the bubbles will disappear on their own, leaving a detergent film on the glass that effectively prevents frost for up to 2 hours. Once the interior temperature rises, use a clean, damp cloth to wipe off the liquid film from the glass.

110

Share

Is the Roewe RX5 equipped with a dry or wet dual-clutch transmission?

The Roewe RX5 1.5T automatic model is equipped with a 7-speed dry dual-clutch transmission, which is a result of joint development between SAIC and General Motors. The Roewe RX5 2.0T is paired with a 6-speed wet dual-clutch transmission. Below are the relevant details: 1. A dry clutch transmits power through direct contact of metal plates, providing more direct power delivery. When the metal plates are pressed together, the transmission ratio increases, resulting in immediate and noticeable effects. In contrast, a wet clutch uses oil as an intermediary, requiring the driving disc to accelerate, increasing the centrifugal force of the oil, and then accelerating the driven disc. This additional step makes the response time slightly slower. 2. The clutch is installed between the engine and the transmission and is the component in the vehicle's drivetrain that directly connects to the engine. Typically, the clutch is mounted with the engine's crankshaft flywheel assembly and serves as the component that disengages and transmits power between the engine and the drivetrain. The vehicle's clutch functions similarly to a switch, engaging or disengaging power transmission. The active and passive parts of the clutch mechanism can temporarily separate or gradually engage, and during transmission, they may also rotate relative to each other.

103

Share

What are the causes of spontaneous combustion in moving vehicles?

The causes of spontaneous combustion in moving vehicles are as follows: 1. Issues with the vehicle's fuel system: Severe collisions or damage to the chassis can compromise the fuel lines, leading to loose connections, fuel leaks, and a significantly high risk of spontaneous combustion. Alternatively, if the vehicle is too old, the fuel lines may have deteriorated, with sludge buildup making heat dissipation difficult. 2. Aging of vehicle wiring: During modifications, both the electrical and fuel systems of the vehicle may be altered. If the technician's skill level is inadequate, it can leave behind safety hazards. 3. High temperatures causing combustion: Placing flammable or explosive items inside the vehicle, such as perfumes, hair sprays, or lighters. 4. Vehicle impact: After a car accident, sparks generated from the impact can trigger spontaneous combustion. 5. Excessive buildup of engine sludge: High temperatures in summer combined with the engine's heat can cause sludge to spontaneously combust due to the elevated temperatures.

115

Share

What does the engine fault indicator light mean?

The illumination of the engine fault indicator light indicates a performance issue with electronic components. Below are explanations regarding engine faults: 1. Sensor malfunction: The sensors mentioned here include those for coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot function accurately. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. 3. Fuel and oil quality problems: Manufacturers typically recommend specific fuel grades and types of engine oil for use. If these recommendations are not followed over time, it can lead to engine wear.

112

Share

What are the consequences of not changing manual transmission fluid?

The impacts of not changing manual transmission fluid are as follows: 1. Reduced oil pressure: This causes the transmission fluid to thicken, lowering oil pressure and hindering internal heat dissipation, leading to excessively high oil temperatures. Consequently, the lifespan of both the transmission and drivetrain components will be shortened. 2. Slippage phenomenon: Failure to change transmission fluid may result in weak acceleration during startup and frequent slippage while driving. 3. Accelerated wear: Prolonged neglect of transmission fluid changes leads to deterioration and evaporation under high-speed and high-temperature conditions, causing rapid component wear and internal transmission damage. Additional impacts include: 1. Impaired vehicle performance: Unchanged transmission fluid affects car performance. During transmission operation, friction between metal components generates debris and impurities. Over time, the fluid becomes contaminated, affecting gear shifts, clogging oil passages, resulting in rough shifting, reduced transmission efficiency, sluggish acceleration, and increased fuel consumption to some extent. Degraded transmission fluid can cause inadequate lubrication, accelerated part wear, and component corrosion, thereby shortening the transmission's service life. 2. Regular inspection required: Transmission fluid should be inspected periodically, typically replaced every approximately 80,000 kilometers. Different transmission designs and performance characteristics require specific viscosity indexes and lubrication properties in transmission fluids. Using incorrect transmission fluid may cause jerky or rough transmission operation during driving.

118

Share