···
Log in / Register

What is the difference between green license plates AD and AF?

6Answers
McDominic
08/30/2025, 10:05:46 PM

Green license plates AD and AF differ as follows: Green plate AD indicates that the vehicle is purely electric and needs to be fully charged to operate. Green plate AF indicates that the vehicle is a hybrid, which can be charged or powered by gasoline. Here are more details about new energy vehicle license plates: Color: New energy license plates primarily feature a green color scheme. Small new energy vehicles use a gradient green background, while large new energy vehicles use a yellow-green dual-color background. Number selection system: The new license plates are issued using a nationwide unified number selection system. All license plate numbers are uniformly regulated and issued to ensure transparency and fairness. Pure numeric number segments are released first according to the new energy license plate numbering rules. Once these resources are exhausted, number segments containing letters are released according to the rules.

Was this review help?
114
Share
Anne
09/12/2025, 01:41:38 AM

I've been driving new energy vehicles for several years, and the difference between green license plates AD and AF is quite significant. AD stands for plug-in hybrid electric vehicles (PHEVs), which have both an electric motor and a gasoline engine. You can charge them at home or at charging stations to run in pure electric mode, saving fuel and being quiet; for long trips or when charging is inconvenient, you can simply refuel and keep driving without worrying about running out of power midway, making it especially suitable for people like me who often drive to suburban areas. AF, on the other hand, represents pure fuel cell vehicles (FCVs), which rely entirely on hydrogen to generate electricity for propulsion, eliminating the traditional engine altogether, and are so environmentally friendly that they only emit water with zero emissions. However, hydrogen refueling is difficult, with very few stations available. Even though it only takes a few minutes to refuel with hydrogen, you often have to take detours, which affects travel efficiency. Overall, AD is more cost-effective and practical, while AF, although greener, has low popularity. Choosing a vehicle depends on your daily needs.

Was this review help?
8
Share
Expand All
IkerMarie
10/26/2025, 02:29:57 AM

As an environmental enthusiast, I focus on the core differences between green-plate AD and AF in terms of environmental impact and energy utilization. AD uses a hybrid system, which can reduce emissions through charging but still relies on fuel combustion, producing carbon emissions. AF directly generates electricity through hydrogen reactions, achieving zero pollution throughout the entire process, making it truly sustainable. Additionally, in terms of charging, AD can utilize existing gas stations and charging piles, making it convenient during my test drive. AF requires specialized hydrogen refueling stations, which are scarce nationwide, significantly reducing convenience. The price difference is also substantial—AD's entry-level models are more affordable, while AF's high-end models are expensive and lack subsidies. In the long run, AF can drive a clean energy revolution, but AD serves as a more practical transitional option. I recommend trying hybrid vehicles first.

Was this review help?
18
Share
Expand All
DonovanRose
12/09/2025, 01:49:36 AM

I've studied automotive technology, and the green license plate AD stands for plug-in hybrid, which is a combination of an internal combustion engine and an electric motor; AF, on the other hand, is a pure fuel cell vehicle, entirely powered by hydrogen-generated electricity to drive the electric motor. AD allows switching between fuel and electric driving, avoiding the range anxiety of pure electric vehicles; AF can only refuel with hydrogen, offering fast speeds but with scarce refueling stations. In terms of performance, AD provides smooth acceleration with the added power of fuel driving; AF is quieter and more environmentally friendly. Regarding price and maintenance costs, AD can be serviced at regular repair shops, while AF requires specialized maintenance with fewer service options and higher fees. Simply put, choosing AD is practical and hassle-free, while AF is ahead of its time and requires patience.

Was this review help?
18
Share
Expand All
McErin
01/29/2026, 03:01:08 AM

For daily commuting, the experience between green-plate AD and AF models is worlds apart. With AD hybrid models, regular charging suffices for city driving, and occasional refueling eliminates range anxiety. AF models require dedicated hydrogen stations, which are time-consuming and often unreliable. In terms of comfort, AD's fuel-electric transition is smooth, while AF offers superior pure-electric driving feel but lacks engine noise, making it feel monotonous. Battery lifespan also differs - AD's lithium batteries are easier to maintain, whereas AF's precision hydrogen systems require costly, complicated upkeep. Safety-wise, AD poses lower risks, while AF's hydrogen storage tanks demand extra caution. Ultimately, AD better suits office workers like me, while AF only appeals to early adopters.

Was this review help?
12
Share
Expand All
BrandonLee
04/24/2026, 02:26:23 PM

From the perspective of the automotive market, the differences between green license plate AD and AF lie in their popularity and future potential. AD, as a hybrid vehicle, is currently the main focus with numerous policy subsidies and widespread charging stations, making it easier for consumers like me to find discounts when purchasing. AF is a pioneer in hydrogen energy, an environmental frontrunner, but suffers from underdeveloped hydrogen refueling infrastructure and doubled prices. In terms of range, AD can achieve over a thousand kilometers comprehensively, while AF relies on new technologies for improvement but faces more limitations. Consumer acceptance is a clear win for AD, with AF only being tested in specific regions. Technologically, AD is mature and improving rapidly, whereas AF has greater innovation potential but requires breakthroughs for widespread adoption. It is recommended that average users opt for AD first.

Was this review help?
6
Share
Expand All
More Q&A

What is the difference between BBS RIA and RID wheels?

Different materials. Below are the specific details: 1. BBS RI-A: This competition-grade wheel is developed based on the exact same design philosophy used in Japan's top-tier SUPER GT racing series. It features an anti-slip coating that helps prevent wheel and tire spin, reducing slippage during high-power vehicle launches. Additionally, it comes with a steel hub sleeve to protect the lug nut holes from damage during frequent wheel installations and removals, fully inheriting the functionality and reliability pursued in extreme performance scenarios. 2. BBS RI-D: An ultra-hard aluminum (Duralumin) forged monoblock wheel, the RI-D utilizes JIS A7000 series alloy—often referred to as aircraft metal—which is notoriously difficult to machine. Among high-strength aluminum alloys, duralumin offers the highest levels of strength and durability.
115
Share

Is there a penalty for being less than 30 cm from the ramp edge?

Starting on a slope with the vehicle body less than thirty centimeters from the edge line, but without crossing the lane line, does not incur a penalty. The evaluation criteria for slope parking and starting are as follows: Failing to park at the designated spot on the slope results in a deduction of 100 points. If the car's front bumper does not reach the control line after stopping, 100 points are deducted. Rolling back more than 30 cm after parking results in a 100-point deduction, while rolling back less than 30 cm incurs a 10-point deduction. The penalty criteria for starting on a slope are as follows: 1. After the vehicle stops, if the car's front bumper or the motorcycle's front axle is fixed on the pole line, and the deviation does not exceed 50 cm, 10 points are deducted; 2. After the vehicle stops, if the distance between the vehicle body and the roadside edge line is more than 30 cm, 10 points are deducted; if the distance exceeds 50 cm, the test is failed.
107
Share

Why Does the Car Keep Making Noise When Driving Over Bumpy Roads?

Due to displacement or deformation in the suspension components, damaged buffer rubber sleeves or blocks, or deformation, oil leakage, internal component wear, or damaged rubber sleeves in the shock absorber. Here is additional information about car noises: 1. In the suspension system, vibrations are generated when elastic components are impacted. To improve driving comfort, shock absorbers are installed in parallel with the elastic components to dampen vibrations. 2. When the piston inside the shock absorber moves up and down, the oil in the shock absorber chamber repeatedly flows from one chamber to another through different pores. The friction between the pore walls and the oil, as well as the internal friction among oil molecules, creates a damping force, converting the car's vibration energy into heat energy, which is then absorbed and dissipated into the atmosphere by the shock absorber. 3. When factors such as the cross-sectional area of the oil passage remain unchanged, the damping force increases or decreases with the relative speed between the frame and the axle (or wheels), and it is related to the viscosity of the oil.
108
Share

Can a C5 driver's license be upgraded to a C2 driver's license?

C5 driver's license cannot be upgraded to a C2 driver's license. Only by successfully passing the relevant driving test subjects can one obtain a C2 driver's license. Here are the relevant details: 1. Content of the driver's license test: The driver's license test is an examination to obtain a motor vehicle driver's license. The content of the test subjects and the passing standards are uniformly set nationwide. The test is divided into three subjects and four tests: theoretical knowledge, field driving skills, road driving skills, and civilized driving-related knowledge. 2. Basic process: The basic process of the driver's license test includes filling out forms, physical examination, acceptance, payment, examination, and certificate issuance.
111
Share

What are the reasons for CarPlay connection failure?

CarPlay connection failure may be caused by a faulty data cable or car USB port. The specific details are as follows: 1. Check the phone: First, confirm whether the phone's data cable has any damage or breakage, and check if there are any foreign objects attached to the metal contacts of the USB plug and phone plug or if the surface is oxidized. 2. Check the car head unit: Check whether the external USB port of the car head unit is damaged internally and whether the contact metal pieces can maintain good contact with the USB plug. Also, check if there is any looseness in the connection between the car head unit and the external USB hub. To avoid prolonged oxidation that may cause poor internal contact, you can repeatedly unplug and replug the connectors at both ends of the cable.
111
Share

What is the CarPlay password?

The default password for CarPlay is usually 8888, 0000, 1688, 2688, or 1234. Here is an introduction to CarPlay: 1. Performance: In terms of performance, the emergence of CarPlay is of epoch-making significance. From then on, car infotainment systems will no longer leave people with the impression of being ugly and clumsy. The operation of CarPlay will give people a refreshing feeling. 2. Future: In terms of the future, CarPlay will become the core of automobiles. One day, CarPlay may even replace the autonomous driving function of cars.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.