···
Log in / Register

What is the curb weight of the Baojun 730?

6Answers
StWyatt
07/28/2025, 06:30:47 PM

The curb weight of the Baojun 730 is approximately 1.5 tons. Curb weight, also known as kerb weight, refers to the total weight of a vehicle when it is fully equipped according to factory specifications (including items like spare tires and tools) and with all fluids topped up. It is a crucial design parameter for automobiles. The Baojun 730 measures 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. The model is equipped with two engine options: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter turbocharged engine delivers a maximum power output of 108kW and a peak torque of 250Nm, with maximum power achieved at 5200 rpm and peak torque available between 2200 to 3400 rpm. This engine features DVVT (Dynamic Variable Valve Timing) technology, multi-point fuel injection, and utilizes an aluminum cylinder head with a cast iron cylinder block.

Was this review help?
110
Share
DeVivienne
08/11/2025, 09:56:14 PM

I remember the curb weight of the Baojun 730 is around 1,500 kg. My family has been using it for three to four years. The car has a spacious interior which makes it convenient for carrying loads, but the higher weight leads to increased fuel consumption. On average, it consumes about 9 liters per 100 km during normal driving, but it performs slightly better on long-distance trips. The heavier weight makes the car more stable and less prone to drifting, which is good for family travel safety. However, you need to pay attention to parking space because its heavy weight results in greater inertia and slightly longer braking distance. During maintenance, it's important to pay extra attention to tire wear, and regular checks on the suspension system can extend the vehicle's lifespan.

Was this review help?
4
Share
Expand All
DanielAnn
10/01/2025, 12:06:04 AM

As a friend who often deals with cars, the Baojun 730 typically has a curb weight around 1,500kg, which affects its overall performance. When empty, it drives lightly and nimbly, but when fully loaded, the increased body weight raises fuel consumption to about 10 liters per 100 kilometers, and demands more power. I've compared it with other MPVs—lighter models like the Baojun 510 weigh around 1,200kg, offering quicker handling but less space; the 730 excels in safety and stability. Before considering weight reduction modifications, carefully weigh the costs and risks—don’t recklessly alter the original design.

Was this review help?
10
Share
Expand All
DelPaislee
11/14/2025, 12:53:45 AM

From my experience with car viewing, the Baojun 730 has a curb weight of approximately 1500kg. This value is crucial for daily use, as the vehicle remains stable without excessive bouncing when carrying loads, making it easier to inspect tires and suspension during maintenance. I recommend regularly checking tire pressure to avoid accelerated wear on components when driving on uneven roads. For beginners, learning to manage vehicle weight is essential, as sufficient braking force is necessary to prevent skidding.

Was this review help?
5
Share
Expand All
VanMia
01/04/2026, 02:34:28 AM

Using the Baojun 730 for family trips at home, the vehicle's curb weight is approximately 1,500 kg, offering ample space for luggage and ensuring stability, safety, and peace of mind. However, the fuel consumption is slightly on the higher side, with 8 liters on the highway and up to 11 liters in the city. The weight helps prevent tailspin when turning. When considering a used car, pay attention to the curb weight to prevent body deformation issues and extend the vehicle's lifespan.

Was this review help?
7
Share
Expand All
LaElla
04/01/2026, 02:41:49 AM

When I first learned to drive, I checked that the curb weight of the Baojun 730 is around 1500kg. For new drivers, this affects driving habits – slower acceleration but better control due to greater inertia. Pay attention to the difference between empty and loaded weight during practice, as proper loading ensures stable center of gravity and reduces accident risks. Considering a vehicle's weight in relation to fuel consumption and performance when choosing a car can boost confidence on the road.

Was this review help?
20
Share
Expand All
More Q&A

can you paint a car without a paint booth

Yes, you can paint a car without a paint booth, but achieving a professional, long-lasting finish is extremely challenging and involves significant risks. For a garage or driveway paint job, proper surface preparation is 90% of the work. Any contamination like dust or moisture will be permanently trapped in the paint. You'll need to create a clean, controlled environment, which often means wetting the floor to control dust and sealing off the area with plastic sheeting. Using a high-volume, low-pressure (HVLP) spray gun is essential for applying basecoat and clearcoat evenly and avoiding orange peel , a textured imperfection that looks like the skin of an orange. The biggest drawbacks are contamination and inconsistent curing. Without temperature and humidity control, the paint may not cure properly, leading to dullness, poor adhesion, or premature failure. This method is best suited for project cars, off-road vehicles, or small touch-ups where a showroom finish isn't the goal. For a daily driver, the cost of professional materials and your time often makes a professional booth a more economical choice in the long run. Factor Professional Booth DIY Garage Setup Dust/Contaminant Control High-Efficiency Particulate Air (HEPA) Filtration Limited; relies on plastic sheeting and damp floors Ventilation Powered exhaust systems Often inadequate; requires respirator use Temperature/Humidity Control Precise climate control Subject to ambient weather conditions Finish Quality Consistently high-gloss, smooth High risk of imperfections (dust nibs, orange peel) Paint Durability Optimal curing for long-term durability Risk of premature fading, peeling, or chipping Overall Cost Higher upfront cost Lower upfront, but potential for costly re-dos
103
Share

can you jump start a car with bad starter

No, you cannot jump-start a car with a faulty starter. A jump-start is designed to address a weak or dead battery by providing an external power source. The fundamental issue is that a bad starter is a mechanical or electrical component failure, not a lack of power. If your battery has sufficient voltage (which can be confirmed with a voltmeter or by the headlights and interior lights being bright) but you only hear a single "click" when turning the key, the starter motor or its solenoid is likely the culprit. A jump-start adds more power to a healthy battery, but it cannot force a broken starter to engage. Understanding the Starter's Role The starter motor is an electric motor responsible for physically cranking the engine to begin the combustion process. When you turn the ignition key, a small amount of power from the battery is sent to the starter solenoid, which acts as a heavy-duty switch. This solenoid then connects the battery's full power to the starter motor, causing it to spin and turn the engine over. A "bad starter" can mean a burnt-out motor, a faulty solenoid that doesn't engage, or worn-out internal components. What to Do Instead of a Jump-Start Since a jump-start is ineffective, here are practical steps to diagnose and potentially resolve the issue: Check the Battery First: Even though a click often points to the starter, first verify the battery has at least 12.4 volts. A weak battery might not provide enough amperage to activate the solenoid properly. The "Tap" Test: A common temporary fix for a stuck starter is to gently tap the side of the starter motor with a hard object like a wrench or a piece of wood. This can jostle the internal brushes or a stuck solenoid back into contact. Caution: Do this carefully to avoid damaging surrounding components. If the car starts after tapping, the starter is failing and needs replacement soon. Inspect Connections: Corroded or loose battery cables, especially the positive cable connected to the starter, can prevent sufficient power from reaching it. Ensure all connections are clean and tight. | Common Symptom | Possible Cause | Quick Check/Fix | | :--- | :--- | :--- | | Single loud click, no crank | Bad starter solenoid or motor | Try the "tap" test; check for power at starter | | Rapid clicking sound | Weak/dead battery | Jump-start should work | | Silence, no lights | Completely dead battery or poor battery connections | Check battery terminals; try jump-start | | Grinding noise | Faulty starter drive/bendix | Starter replacement required | The definitive solution for a confirmed bad starter is replacement by a qualified mechanic. Continuing to drive with a failing starter can lead to being stranded.
120
Share

can you jump start a tesla with a gas car

No, you cannot use a gas car to jump-start the main lithium-ion battery pack of a Tesla. However, you can use one to jump-start the Tesla's 12V accessory battery , which is a separate, smaller battery that powers the car's electronics like the windows, lights, and most critically, the computer that controls the high-voltage system. If the 12V battery is dead, the car will not start, even if the main battery is fully charged. The process is specific and must be followed carefully to avoid serious damage to either vehicle's electrical systems. The high-voltage system in an EV is not designed to receive a charge from an external gasoline engine's alternator. Key Steps for Jump-Starting the 12V Battery: Locate the Terminals: The jump-start terminals for the 12V battery are not under the hood in a traditional location. In most Teslas, they are behind a removable panel in the front bumper's tow hook area or under the frunk (front trunk) liner. Consult your owner's manual for the exact location. Connect Correctly: With the gas car turned off , connect the red positive (+) clamp to the Tesla's 12V positive terminal. Then, connect the black negative (-) clamp to a dedicated grounding point or a solid unpainted metal bracket on the Tesla's chassis— not to the 12V battery's negative terminal itself. Start the Gas Car: Start the gas car and let it run for a few minutes to allow its alternator to charge the Tesla's depleted 12V battery. Disconnect in Reverse Order: Once the 12V battery has some charge, you can disconnect the cables in the reverse order you connected them. The Tesla's main computer should then boot up, allowing you to drive. This is strictly an emergency procedure to regain access to the car. Once the 12V system is active, the car will draw power from the main battery to recharge the 12V battery as you drive. If the main battery is also completely depleted, it will need to be charged via a standard EV charger or a flatbed tow to a charging station.
106
Share

can you pay cash at enterprise car rental

Yes, Enterprise Rent-A-Car does accept cash as a form of payment. However, it's not as straightforward as showing up with cash at the time of rental; it's primarily an option for the return transaction and comes with significant requirements you must meet at the start of your rental. To pay with cash upon return, you must first qualify by presenting a major credit card in your name at the time of pickup. Enterprise will perform a credit check and place a hold on your card for the estimated rental amount plus a significant security deposit, which can be several hundred dollars. This policy is in place to mitigate risk. The cash payment option is typically available only at corporate-owned locations (not all franchisees) and is subject to manager approval. You'll also need to provide additional identification, such as a utility bill, to prove your address. The security deposit amount varies based on the vehicle class and location. Here’s a general idea of potential deposits: Vehicle Class Estimated Cash Security Deposit Economy/Compact $200 - $300 Intermediate/Standard $250 - $400 Full-Size/Premium $300 - $500 SUV/Minivan $400 - $750 Luxury Vehicle $500+ It's crucial to call your specific rental branch in advance to confirm their cash acceptance policy, as franchise locations may have different rules. For a smoother experience, using a debit or credit card for the entire transaction is highly recommended.
101
Share

can you print a car title in pennsylvania

Yes, you can get a duplicate (replacement) car title printed in Pennsylvania, but you cannot simply print one yourself at home. The process must be done officially through the Pennsylvania Department of Transportation (PennDOT). You'll need to complete Form MV-38O, "Application for Duplicate Certificate of Title," and submit it along with the required fee and proper identification. The most critical step is ensuring your vehicle's record is clear of any liens; if a lien is present, the lienholder must request the duplicate. The primary reason for needing a duplicate title is if the original is lost, stolen, or damaged. This document is essential for selling your car, transferring ownership, or sometimes even as proof of ownership. You can submit your application by mail to the address listed on the form or in person at your local PennDOT County Treasurer office or an authorized Agent service center. Be prepared to provide your vehicle identification number (VIN), license plate number, and current odometer reading. Processing times can vary. While some agents offer expedited services for an additional fee, standard mail-in requests can take several weeks. It's crucial to keep the new title in a secure place once you receive it. If you find the original title after applying for a duplicate, you must surrender it to PennDOT as it is no longer valid. Key Data Point Details Governing Body Pennsylvania Department of Transportation (PennDOT) Required Form MV-38O (Application for Duplicate Certificate of Title) Standard Fee Approximately $67 (subject to change) Processing Time (Mail) 4-6 weeks In-Person Option PennDOT County Treasurer or Authorized Agent Expedited Service Available at some agents for an extra fee Lienholder Requirement Must apply for the duplicate if a lien exists
102
Share

can you pay your car insurance a day late

Yes, you can often pay your car insurance a day late, but it's a risky move that should be avoided. Most insurers provide a grace period , typically between 10 to 30 days after your payment due date, during which your coverage remains active. However, paying even a single day late can trigger consequences. You might be charged a late fee , and more importantly, the insurer could report the missed payment to credit bureaus, potentially affecting your credit score. The safest approach is to always pay on time or contact your insurer before the due date if you anticipate a problem. The specific rules depend entirely on your insurance company and state regulations. Some companies are strict and may cancel your policy for non-payment immediately after the due date passes, while others are more lenient. The key is to understand your policy's terms. Insurance Company Typical Grace Period Common Late Fee Risk of Policy Cancellation for 1-Day Lateness State Farm 10-30 days Varies by state Low Geico 9 days (in most states) Up to $10 Low to Moderate Progressive 10 days Varies by state Low Allstate 30 days (in many states) Percentage of premium Very Low USAA 15 days Often $5 Low If you realize you've missed the payment, log into your account or call your agent immediately to make the payment. The coverage is likely still in force during the grace period, but you are accruing a debt for that time. To prevent future issues, set up automatic payments or calendar reminders. Consistently late payments signal financial instability to insurers, which could lead to higher premiums at renewal. Proactive communication is always better than dealing with a potential lapse in coverage.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.