What is the bolt pattern of the Chery Tiggo 3 wheel hub?

[DelLily]

The bolt pattern of the Tiggo 3 is 5*114.3mm. The main parameters of a car wheel hub consist of three parts: wheel size, offset (ET), and center bore: 1. Wheel size is determined by two parameters, the rim diameter and rim width, which can usually be found on the engraved markings on the back of the wheel hub. 2. The offset, also known as ET, is the distance between the mounting surface and the centerline of the wheel hub. 3. The center bore is the large hole in the middle of the wheel hub, and it's important to note that the center bore size should be measured from the back for accurate data. The bolt pattern refers to the pitch circle diameter of the wheel hub's mounting screw holes.

[Katherine]

I previously helped a friend modify the wheel rims on his Chery Tiggo 3. The bolt pattern is 5x114.3 mm, meaning there are five bolt holes forming a circle with a diameter of 114.3 mm. This specification is particularly important when replacing rims or during repairs. I’ve seen cases where someone installed rims with the wrong bolt pattern, resulting in severe steering wheel vibration and accelerated tire wear. If the bolt pattern doesn’t match, it can lead to loose bolts and even accidents. So before purchasing new rims, I always check the vehicle manual or confirm the specific data online, as the Tiggo 3 from different years might have slight variations. Ensuring compatibility is crucial.

[HoldenFitz]

I've been driving my Chery Tiggo 3 for several years, and the wheel hub bolt pattern is 5x114.3 mm. I remember last year when I was changing to winter tires, I almost bought the wrong size. If the bolt pattern isn't accurate, the wheels won't fit properly, and it can even affect braking performance. When modifying wheels, don't just focus on looks; if the bolt pattern is wrong, it can disrupt the vehicle's balance. I usually search for model information on forums and measure my car's specifications myself. Wheel parameters are no small matter—they're crucial for daily driving stability and safety.

[LeGideon]

From a safety perspective, the bolt pattern of the Chery Tiggo 3 is 5x114.3 mm, and it must be ensured to be accurate. I have personally experienced a car with an incorrect bolt pattern, where the wheels were not installed stably, causing dangerous shaking at high speeds. I recommend that car enthusiasts verify the bolt pattern parameters every time they change tires or modify their vehicles to avoid potential accidents. It's also a good habit to check whether the wheel bolts are tightened.

[SanJoanna]

Modifying the Tiggo 3 wheel rims? Its bolt pattern is 5x114.3 mm. I measured it myself last time during a DIY project, just use a ruler to measure the distance between the centers of the holes. If the bolt pattern is wrong, the car will vibrate heavily and consume more fuel. When checking information, it's more reliable to refer to your car's specific year and version. Besides the bolt pattern, also pay attention to the wheel rim size compatibility, don't change them randomly.

[McEverett]

Recalling the repaired Tiggo 3, the wheel hub bolt pattern is fixed at 5x114.3 mm. Don't overlook this detail when changing rims—a mismatched bolt pattern can damage the suspension system. I've seen cases where wheels fell off. It's advisable to measure your vehicle's specifications before purchase or consult a professional shop to ensure safety. Wheel rim modifications require comprehensive consideration of compatibility.