What is the actual fuel consumption of the Trumpchi M6?

1 Answers
JuliannaMarie
07/29/25 10:33am
The fuel consumption of the Trumpchi M6 ranges from 7.1 to 7.5L. Below is a related introduction to the Trumpchi M6: Model Series: 2021 270T Manual Elite Edition (7-seater), 2021 270T Automatic Elite Edition (7-seater), 2021 270T Automatic Luxury Edition (6-seater), 2021 270T Automatic Luxury Edition (7-seater), 2021 270T Automatic Premium Edition (7-seater), 2021 270T Automatic Premium Edition (6-seater), 2021 270T Automatic Honor Edition (7-seater), 2021 270T Automatic Honor Edition (6-seater), 2021 270T Automatic Noble Edition (7-seater), 2021 270T Automatic Noble Edition (6-seater). Fuel consumption of other models: The 2021 1.5L 270T Manual Elite Edition 7-seater has an average fuel consumption of 8.72L per 100km, the 2021 1.5L 270T DCT Elite Edition 7-seater has an average fuel consumption of 10.39L per 100km, and the 2021 1.5L 270T DCT Luxury Edition 7-seater has an average fuel consumption of 9.23L per 100km.
Was this review help?
15
5
Share
More Forum Discussions

How to Replace the Gear Oil for Tiggo 3

Steps for replacing the gear oil of Tiggo 3: 1. Remove the gear. First, locate the position of the odometer cable on the transmission, then carefully remove the odometer cable shaft cover, and slowly pull out the plastic small gear. 2. Drain the old gear oil. Remove the transmission gear oil drain plug, completely drain the old gear oil, and then tighten the drain plug. Ensure all the old oil is drained to prevent contamination of the new gear oil. 3. Add new gear oil. Start adding gear oil from the odometer shaft hole, paying attention to the oil level not exceeding the F line. Be careful to prevent oil spillage during the process. 4. Reinstall. Carefully reinstall the removed gear, preferably following the operation manual to ensure no parts are missing.
13
1
Share

Is It Safe to Install Additional Pillows in a Car?

Installing additional pillows in a car is safe. Car headrests are both a comfort-enhancing accessory and a safety protective device. The functions of car seat headrests include: 1. Effectively protecting the cervical spine, thereby preventing muscle spasms in the neck; 2. Effectively promoting local blood circulation, eliminating local inflammatory pathogenic factors, and preventing stiffness and tightness in the neck and shoulder muscles; 3. Helping to maintain proper neck posture, avoiding excessive forward tilting of the cervical spine, preserving the normal physiological curvature of the cervical spine, and preventing it from becoming straight or even developing a reverse curve; 4. Effectively slowing down the occurrence of degenerative cervical spine conditions, playing a significant role in preventing cervical spondylosis.
7
5
Share

What is the symbol for low beam headlights when driving at night?

The symbol for low beam headlights when driving at night is shaped like a lamp, with the emitted light beam pointing diagonally downward to the left. On the dashboard display, the low beam indicator appears in green. Common vehicle lighting usage scenarios are as follows: Low Beam Headlights: Primarily used for short-range illumination, with a limited projection distance of approximately 25-35 meters. They offer a wide illumination angle of about 160 degrees and cause minimal glare to human vision. These are employed during dusk, nighttime, overcast conditions, rain, snow, fog, and other low-visibility weather. Turn Signals: Located on the left-hand stalk near the steering wheel, turn signals are activated by pushing the lever upward for right turns and downward for left turns. Their main purpose is to indicate an impending turn or lane change. Usage scenarios include: vehicle startup, parking, entering/exiting curves, lane changes, U-turns, overtaking, and entering/exiting roundabouts. Brake Lights: Commonly known as "stop lights," brake lights are positioned on both sides at the rear of the vehicle. A key advantage is that they illuminate whenever the brake pedal is depressed, regardless of whether the vehicle's lights are on. This serves to alert following drivers that the vehicle is decelerating, prompting them to adjust speed and maintain a safe following distance.
7
4
Share

At What Speed Should You Shift Gears in a Manual Transmission?

Manual transmission should shift gears when the speed reaches 20 km/h and the engine speed is between 1500 to 2000 rpm. A manual transmission is a type of manual gearbox where the driver manually shifts gears by moving the gear lever, which changes the gear engagement inside the transmission and alters the gear ratio to achieve speed variation. The working principle of a manual transmission involves using the shift fork to change the gear ratio or tooth ratio of the engaged gears, thereby altering the driving torque to suit different driving conditions. The method for shifting gears in a manual transmission is as follows: 1. Gently press the clutch pedal all the way down with your left foot; 2. Lightly hold the gear lever with your right hand and shift gears according to the current speed. The shifting action should be gentle, quick, and done in one smooth motion; 3. Slowly release the clutch with your left foot, and depending on the speed, you can slightly press the accelerator with your right foot to complete the gear shift.
17
4
Share

How long is the new Sylphy?

The dimensions of the new Sylphy are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2712mm, front track of 1588mm, and rear track of 1594mm. The exterior of the new Sylphy adopts the VMotion 2.0 design language and is equipped with Nissan's exclusive IDM Intelligent Driving System. The new Sylphy features front-engine, front-wheel-drive layout, powered by a 1.6L naturally aspirated engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 90kW, maximum torque of 155Nm, and maximum horsepower of 122Ps.
8
1
Share

How Long Can a Car Sit Before It Needs to Be Started?

If a car is parked for half a month, it needs to be started. When a car is not started for a long time, most of the lubricating oil that should adhere to the lubrication components will flow back to the oil pan due to gravity, reducing the lubrication effect in various moving parts. Without the protection of an oil film, metal can easily react with oxygen to form an oxide film, increasing friction and making it difficult to start. The function of the starting system is to convert the electrical energy from the battery into mechanical energy through the starter, initiating the engine's operation. The starting system is designed to transition the engine from a stationary state to an operational one. This requires an external force to rotate the engine's crankshaft, enabling the pistons to begin their up-and-down motion, drawing the combustible air-fuel mixture into the cylinders, and then sequentially entering the subsequent working cycles.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.