···
Log in / Register

What is the 0-100 km/h acceleration time of the Excelle?

6Answers
SanDonovan
07/29/2025, 07:58:17 AM

According to official data, the Excelle with a 1.3L engine has a 0-100 km/h acceleration time of 11.2 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents the magnitude of force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Excelle 1.3L has a maximum torque of 133 N·m, achieving a 0-100 km/h acceleration time of 11.2 seconds. In comparison, the Lexus 2.0L naturally aspirated engine has a maximum torque of 208 N·m but a slower 0-100 km/h acceleration time of 12.5 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Excelle is available with either a 5-speed manual transmission or a CVT transmission.

Was this review help?
111
Share
OLydia
08/13/2025, 05:27:18 PM

As a tech-savvy person who often focuses on car performance, I understand that the Buick Excelle's 0-100 km/h acceleration time generally ranges between 10 to 12 seconds, depending on the model and year. For example, the common 1.5L automatic version takes about 11 seconds to accelerate from standstill to 100 km/h. This mainly depends on engine power, vehicle weight, and transmission type; manual transmissions are slightly faster, while automatics are smoother but lose some time. Acceleration performance is significantly affected by engine efficiency, and upgrading the air filter or maintaining good fuel quality can slightly improve responsiveness. In daily driving, this speed is considered moderate, suitable for city commuting and highway cruising. However, it's important to note that aging tires or clogged fuel lines can further slow acceleration, so regular maintenance is key. It's recommended to check the vehicle's condition annually to ensure stable power output.

Was this review help?
14
Share
Expand All
DiAriel
10/08/2025, 03:38:01 AM

I often drive my Excelle to commute, with a 0-100 km/h acceleration time of just over 11 seconds. It feels quite smooth at startup, and is completely adequate if you're not looking for racing performance. In daily driving, this acceleration time means overtaking is relatively easy, especially getting a quick start at traffic lights. Factors affecting this include load - if the trunk is packed full, the speed will drop; and driving habits, where gently pressing the accelerator responds faster than stomping on it. For maintenance, I recommend changing the oil and cleaning carbon deposits every six months to keep the engine lively. Overall, an 11-second acceleration isn't outstanding among regular sedans, but it offers high comfort and reliability, making for a stress-free and reassuring drive.

Was this review help?
3
Share
Expand All
Kayla
11/21/2025, 09:09:24 PM

When buying a car, I prioritized practicality and economy. The Buick Excelle's 0-100 km/h acceleration time is around 11 seconds, which is relatively slow but results in better fuel efficiency. For example, the 1.5L engine's slightly slower acceleration means smoother engine operation and lower fuel consumption. The driving experience leans more towards family comfort, and the extended acceleration time avoids the high fuel consumption issues caused by sudden acceleration. It's advisable to consider your own needs; if frequent highway driving is required, checking tire pressure and spark plugs can optimize performance. This car is economical in its class, and its slower acceleration actually benefits long-term use.

Was this review help?
2
Share
Expand All
DiMary
01/11/2026, 10:45:26 PM

I've compared multiple brands, and the Buick Excelle typically accelerates from 0-100 km/h in around 11 seconds, slower than the Corolla's sub-10-second time but faster than some pure electric vehicles. This indicates its acceleration performance is average among compact sedans, with responsiveness largely dependent on transmission programming and engine tuning. The actual driving experience prioritizes smoothness over aggressiveness, making it suitable for family users. When choosing, test driving different model years can reveal variations, and with proper maintenance, the acceleration time can approach 10 seconds. For those on a limited budget, this car offers good value for money—while not the quickest in acceleration, it's safe and reliable.

Was this review help?
11
Share
Expand All
MatteoDella
04/08/2026, 02:42:01 AM

Having driven cars for many years, I deeply understand the importance of 0-100 km/h acceleration time for safety—the Buick Excelle's approximately 11-second setting ensures stable starts, avoiding sudden acceleration and loss of control. On highways, this speed allows for safe overtaking maneuvers with more composed handling. Factors affecting acceleration include vehicle weight and road conditions; I recommend regular maintenance of the battery and throttle sensor to prevent sluggish response. The driving experience is comfortable—though not sporty, its high reliability makes long-distance travel worry-free.

Was this review help?
15
Share
Expand All
More Q&A

Do cars with automatic headlights require no manual control of the lights?

Cars with automatic headlights do not require manual control of the lights; the vehicle will automatically turn the lights on or off based on the surrounding light conditions. Automatic Low Beam: Automatic headlights simply mean the vehicle can automatically control the low beam switch according to the surrounding lighting conditions. When the automatic headlights are active, the vehicle has essentially turned on the low beams. Automatic headlights can be understood as an automated program that eliminates the need for manual operation of the low beam switch, making daily use more convenient. Automatic High Beam: The function of automatic high beams is quite similar to that of automatic headlights, as they can automatically control the high beam switch based on road lighting conditions. However, the conditions for activating automatic high beams are more stringent. Generally, automatic high beams will not turn on automatically in urban areas; they only activate on poorly lit highways or rural roads.
101
Share

What Causes a Sudden Increase in Engine Noise in Small Cars?

Reasons for a sudden increase in engine noise in small cars: engine overheating leading to loss of power; internal engine issues, such as valve blockage. Engine Overheating: If the engine operates for an extended period, causing surface overheating, the cooling system may fail. The first step is to check the cooling system. If there's an issue with the cooling system, it could lead to exhaust blockage, as the vacuum tube might be prone to breaking. Internal Engine Issues: Check the cooling system to see if the coolant level is normal. Then, inspect the oil pressure gauge to determine if the issue is related to oil pressure or ignition problems.
110
Share

How to Replace a Car Timing Belt?

The method for replacing a car timing belt is as follows: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the generator belt tensioner; 3. Loosen the crankshaft pulley screw; 4. Remove the engine mounting bracket and the protective cover on the timing belt; 5. Remove the lower cylinder block mounting bracket and take off the crankshaft pulley; 6. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 7. Remove the timing belt and the timing tensioner to complete the replacement. The timing belt is an important component of the engine's valve system. It is a rubber part and its functions are: 1. To ensure the accuracy of intake and exhaust timing; 2. To ensure the synchronization of engine ignition and cylinder movement; 3. To ensure the smooth output of engine power.
115
Share

Is Subject One Easy?

Subject One is the theoretical knowledge for beginners, which is relatively simple, and much of the content is common sense, making it easy to understand and remember. Test-takers only need to practice more exercises to enhance their memory, and passing the Subject One exam is not difficult. Below is an introduction to Subject One: 1. Exam Process: The total time for the Subject One exam is 45 minutes, with the test paper consisting of 100 questions, including true/false and multiple-choice questions. The full score is 100, and a passing score is 90. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." 2. Exam Arrangement: Subject One refers to the driver's theoretical test, conducted at the vehicle management office, which is a mandatory licensing exam for all driver's license applicants. The schedule for the driver's theoretical test is arranged independently by local vehicle management offices.
118
Share

What colors are available for the Toyota Levin?

Toyota Levin is available in a variety of colors including Pearl White, Amber Brown, Crystal Silver, Sapphire Blue, Lightning Orange, Red Mica Metallic, Black Mica Blue, Metallic Silver, Metallic Orange, and Metallic Gray. Below is an introduction to the Toyota Levin: 1. The dimensions of the Toyota Levin are 4640mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2700mm. 2. In terms of powertrain, the gasoline version is equipped with a 1.2T+CVT combination, delivering a maximum power of 85kW and a peak torque of 185N·m. The hybrid model features a 1.8L Atkinson cycle engine and Toyota's THS II hybrid system, with the engine producing a maximum power of 72kW and a peak torque of 142N·m, while the electric motor delivers a peak power of 53kW and a peak torque of 163N·m, resulting in a combined system power of 90kW.
120
Share

What Causes Occasional Difficulty in Shifting Gears in a Manual Transmission?

Occasional difficulty in shifting gears in a manual transmission is typically a clutch-related issue. Below are solutions for gear-shifting problems: Inspect Components: If the transmission fluid hasn't fully lubricated the system, starting the engine and letting it run for a while before shifting may resolve the issue. If internal transmission components such as gears, synchronizers, or shift forks are damaged, repairs will be necessary. Check the Clutch: If the clutch isn't fully disengaging, try pressing the clutch pedal firmly to the floor to see if shifting becomes possible. If clutch components are damaged, repairs or replacements (such as friction discs, pressure plates, or release bearings) will be required. Examine the Shift Linkage: If gear-shifting difficulty is caused by worn shift linkage, attempting to shift multiple times may temporarily resolve the issue.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.