···
Log in / Register

What engine is equipped in the BAIC Weiwang S50?

1Answers
MaliaLynn
09/06/2025, 04:40:57 AM

BAIC Weiwang S50 is equipped with a 1.5T L4 turbocharged engine, model 4A91T, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 210nm, DOHC valve train, multi-point electronic fuel injection, aluminum alloy cylinder head, aluminum alloy cylinder block material, and it is recommended to use 92-octane gasoline, meeting the National V emission standard. The BAIC Weiwang S50 is a compact SUV launched by BAIC, with dimensions of 4654mm in length, 1816mm in width, and 1680mm in height, and a wheelbase of 2670mm. The BAIC Weiwang S50 places great emphasis on personalization, offering two styles of front grilles for consumers to choose from, namely the three-horizontal bar front grille and the vertical waterfall-style front grille, both with chrome treatment. The headlights feature a sharp design, while the rear largely follows the styling of the Senova X65, with dual exhaust pipes that exude a sporty feel.

Was this review help?
109
Share
More Q&A

Is it normal to maintain 3500 RPM on the highway for extended periods?

Maintaining 3500 RPM on the highway is normal. Here are the relevant details: 1. Normal range: An engine speed of 3000 RPM at 120 km/h falls within the normal range. Some vehicles may reach up to 4000 RPM, while others could be around 2000 RPM. The exact RPM varies by vehicle model and cannot be used as a sole indicator of a car's quality. The RPM is not solely determined by engine displacement but also heavily depends on the transmission. 2. Other types: Engines with 1.5L displacement often operate above 3000 RPM, while 2.0L engines typically run above 2000 RPM. However, these figures are not absolute, as transmission type and gear ratio are the primary factors influencing RPM. If the gear ratio is made smaller, some small-displacement engines may experience increased load, potentially making it difficult for the engine to propel the vehicle normally. Even if the vehicle can be driven, the increased load may push it beyond the economical range, compromising fuel efficiency.
104
Share

Where to Resolve Driver's License Point Deductions?

Driver's license point deductions can be resolved at the Vehicle Management Office or the Traffic Police Brigade service hall. Additionally, they can also be handled online through platforms such as the "Comprehensive Traffic Safety Service Management Platform" or "Traffic Management 12123." Online processing is generally only available for violations captured by electronic surveillance. Furthermore, the total points deducted for pending violations combined with previously accumulated points cannot reach 12. Online learning for license point deductions is typically for drivers whose licenses have accumulated a full 12 points within a single scoring period. According to the regulations on the application and use of motor vehicle driver's licenses, if a driver accumulates 12 points within a scoring period, they are required to attend a 7-day safe and civilized driving course at a designated location. If the driver does not have time to attend in person, they can complete the learning online.
108
Share

What lights should a sedan turn on in a tunnel?

A sedan should turn on its headlights (low beams) in a tunnel. At this time, the low beams and width indicator lights at the front of the car will illuminate, and the brake lights at the rear will also turn on. Since the light inside the tunnel is relatively dim, turning on the headlights can alert vehicles in front and behind to the car's position, ensuring driving safety. Because the light outside the tunnel during the day is intense and glaring, while the light inside the tunnel is relatively weak, there is a period of eye adaptation when entering the tunnel. During this process, the driver's judgment of road conditions can easily be affected. Precautions for driving in a tunnel include: 1. Drive at a steady speed, reduce speed before entering the tunnel, and also slow down when exiting the tunnel. These actions are to allow the eyes to adapt to the changes in light; 2. When driving in a tunnel, try to follow the car in front and avoid overtaking.
106
Share

How to Remove Brake Dust from Wheel Rims?

The method to remove brake dust from wheel rims is: Professional cleaning agents should be used in combination with a brush to remove it. If you want to remove brake dust, it is recommended to go to a professional car cleaning facility. It is quite normal for wheel rims to have brake dust. During the process of friction between the brake pads and the brake discs, some powder will inevitably fall off. Some cars' brake pads do not produce dust, while others have severe dust production. If the brake pads produce a lot of dust, it is advisable to clean the wheel rims frequently. Use high-pressure cleaning to rinse off the mud and dust from the tires, the exterior of the wheel rims, and the inner side of the fenders, and wipe them with a towel to remove any loose dirt. For cleaning the wheel rims, evenly spray the aluminum alloy wheel rim cleaner on the surface, wait for 2 to 3 minutes, then use a soft brush or sponge to wipe, being careful not to damage the metal surface. Also, ensure that no areas are missed between the spokes and blades of the wheel rims.
103
Share

How to turn off the two small lights on the rear door of the Tayron?

The method to turn off the two small lights on the rear door of the Tayron is to press the rear light switch. Taking the 2020 Volkswagen Tayron as an example, it is a mid-size SUV with body dimensions of 4589mm in length, 1860mm in width, 1660mm in height, and a wheelbase of 2731mm. The 2020 Volkswagen Tayron features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
115
Share

What are the reasons for the humming noise when the transmission bearing is damaged?

The reasons for the humming noise when the transmission bearing is damaged are: 1. Abnormal gear meshing clearance; 2. Gear tooth surface metal peeling, tooth breakage, or misalignment during assembly; 3. Insufficient lubrication due to lack of lubricating oil; 4. Water ingress into the transmission without timely repair, which may lead to abnormal noise over time; 5. Loose bolts on the transmission housing; 6. Excessive clearance between the gearshift lever and the shift fork groove in a manual transmission; 7. Use of inferior automatic transmission fluid. The functions of the transmission are: 1. To change the transmission ratio; 2. To expand the torque and speed of the driving wheels; 3. To enable the vehicle to reverse; 4. To facilitate gear shifting or power output in the transmission.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.