···
Log in / Register

What does Y mean on a tire?

1Answers
Charles
07/24/2025, 07:41:22 PM

Tire Y refers to the speed rating of the tire. The Y indicates that the maximum speed of this tire is 300 km/h. Below is an introduction to tire speed ratings: 1. The tire speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Different tires will have their speed rating represented by English letters on the sidewall. 2. Additionally, V and W also denote speed ratings, where V indicates a maximum speed of 240 km/h and W indicates a maximum speed of 270 km/h for the tire.

Was this review help?
105
Share
More Q&A

Can a car still undergo annual inspection after two years without it?

Can a car still undergo annual inspection after two years without it? Yes, as long as it does not exceed three inspection cycles, the car can continue to participate in the annual inspection. Below is relevant information about vehicle annual inspections: Meaning of vehicle annual inspection: Vehicle annual inspection is a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It involves an annual inspection of the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Purpose of annual inspection: It helps to promptly eliminate potential safety hazards in the vehicle, encourages better maintenance and care of the car, and reduces the occurrence of traffic accidents. Preparation before annual inspection: Before the annual inspection, some preparatory work is needed (such as knowing relevant information, making an online appointment, understanding the process, and being aware of issues to pay attention to with the car) to ensure a smooth and successful inspection.
101
Share

The Difference Between Cold Start and Hot Start of a Car

Below are the specific differences between cold start and hot start of a car: In terms of starting method: A cold start refers to starting the engine after it has been turned off for a period of time, during which the engine has cooled down significantly below its normal operating temperature, and the engine oil has largely drained back. Generally, the ambient temperature can be used as a measure—when the engine temperature drops below 40°C after being turned off, usually taking about 2 hours, starting it again at this point is considered a cold start. A hot start, on the other hand, occurs when the engine is started again shortly after being turned off, while the engine temperature is still close to its normal operating range, and the oil film on the engine's friction surfaces has not yet drained away. In terms of impact on the car: A cold start is more damaging to the car compared to a hot start, with over 80% of engine wear occurring during the cold start phase. Additionally, a cold start is more challenging and takes longer to initiate than a hot start.
120
Share

What to Do If Driving License Points Are Deducted?

At the end of the scoring cycle, you can participate in the verification study at the vehicle management office or through the mobile app Traffic Management 12123 to restore the points. After submitting the application in stages, the verification can usually be completed the next day. You need to take the subject one test of the motor vehicle driver's license at the vehicle management office, complete the downgrade procedures, and restore the points. A driving license has 12 points in one scoring cycle.
101
Share

How to Release a Locked Automatic Transmission Gear?

The switch to unlock the P gear is located at the head of the vehicle's gear lever and is a large button. Pull the driver's door handle to open the driver's door and locate the vehicle's center console. In front of the console is the gear lever, and above the gear lever is the P gear unlock button. Press the P gear unlock button to release the emergency switch of the Roewe vehicle. When operating, ensure to press the brake pedal and keep the vehicle stationary.
105
Share

How to Resolve Adaptive Headlight Malfunction?

Disconnect the bulb's power socket when unplugging the bulb power connector; Remove the waterproof cover behind the bulb, as most headlight waterproof covers are made of soft rubber; Extract the bulb from the reflector housing; Install the new bulb into the reflector housing, aligning it with the fixing slots, as there are several fixing slots on the bulb base.
116
Share

What is the appropriate tire pressure for the Qashqai?

The tire pressure for the Qashqai should be between 2.4 and 2.5 bar. Here is some additional information about the Qashqai: Basic parameters of the Qashqai: Taking the 2021 Qashqai as an example, it is a mid-size SUV with body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, a wheelbase of 2646mm, a fuel tank capacity of 57 liters, and a curb weight of 1444kg. Configuration of the Qashqai: The 2021 Qashqai features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power of 111kW, and a maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.