···
Log in / Register

What does the yellow exclamation mark on the Haval H6 dashboard mean?

1Answers
LaRachel
07/29/2025, 05:23:22 AM

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. This could include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that the transmission has a fault or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling that a car light has malfunctioned. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. There is also a red exclamation mark inside a circle with a bracket, which represents a warning for the braking system. This mainly includes braking system failure and low brake fluid level. The braking system should be inspected immediately to avoid accidents.

Was this review help?
109
Share
More Q&A

How to Obtain the 6-Year Inspection Exemption Decal?

6-Year Inspection Exemption Decal Application Method: Vehicle owners need to bring the vehicle registration certificate and a valid compulsory traffic insurance policy to the vehicle management office to apply for the inspection decal. Before the sixth-year inspection deadline, the vehicle must be taken to an inspection station for an on-site test. Upon passing the inspection, the annual inspection decal can be obtained. Vehicles meeting the following conditions are eligible for the exemption decal: 1. The exemption applies to non-operational small and mini passenger vehicles registered within 6 years; 2. Excludes minivans, but includes non-operational small and mini passenger vehicles with 7 to 9 seats; 3. Excludes vehicles that have not been registered for over 4 years since the manufacturing date; 4. The vehicle must not have been involved in any injury-causing traffic accidents and must have all traffic violation records cleared.
106
Share

How to Start a Dongfeng Nissan Sylphy?

Starting steps for Dongfeng Nissan Sylphy: 1. Press the foot brake and press the start button twice to initiate the vehicle computer system self-check, lasting at least 6 seconds; 2. Press the foot brake and press the start-stop button to ignite; 3. Release the foot brake and warm up the car while stationary; 4. Press the foot brake, release the handbrake, and shift the gear from P to D; 5. Slowly release the foot brake to start moving; 6. According to road conditions, steadily press the accelerator to increase speed and drive safely. In terms of body dimensions, the Dongfeng Nissan Sylphy measures 4641 mm in length, 1815 mm in width, and 1450 mm in height, with a wheelbase of 2712 mm. For the suspension system, the front suspension is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension.
119
Share

How to Solve the Problem of Blurred Vision After Wiper Wiping?

Solutions for blurred vision after wiper wiping: Replace the wiper with a new one. Wipers are rubber products, and prolonged use can lead to aging. When the rubber of the wiper ages, it can no longer fit perfectly with the windshield, resulting in the wiper's inability to clean the water completely. If the water cannot be wiped clean, it will cause the windshield to become blurry after wiping. Precautions for using wipers: 1. When using the car, never turn on the wiper when there is no water on the windshield; 2. When parking, it is advisable not to park the car in a place exposed to direct sunlight, as this will accelerate the aging of the wiper rubber; 3. When parking on winter nights, it is recommended to lift the wiper up to prevent the rubber from freezing to the windshield.
104
Share

How to display the four tire pressures on the Tiguan L?

The method to display the four tire pressures on the Tiguan L: 1. Before resetting, the tire pressure should be restored to the normal level; 2. Start the vehicle; 3. Press and hold the SET button on the center console until the tire pressure data refreshes. The Tiguan L's tire pressure monitoring system is indirect. When the tire pressure is too low or there is a tire leak, the tire pressure monitoring warning light will illuminate on the dashboard. In terms of body dimensions, the Tiguan L measures 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm. For powertrain, the Tiguan L is equipped with a turbocharged engine that delivers a maximum horsepower of 150 hp, a maximum torque of 250 Nm, and a maximum power output of 110 kW.
117
Share

How Thick Should Jumper Cables Be for a Car?

Car jumper cables typically use 25 square millimeters of pure copper wire, with a length of about 3 meters. Steps for jump-starting: 1. Before jump-starting, always turn off the engine first. If the battery is dead, do not repeatedly attempt to start the car, as this will drain the last remaining power of the already weak battery. 2. Take out your own jumper cables or borrow positive and negative cables from another car. 3. Take one jumper cable, connect one end to the positive terminal of the dead battery and the other end to the positive terminal of the live battery. 4. Take the other jumper cable, first connect it to the negative terminal of the live battery, then connect the other end to the engine of the dead car. 5. After connecting the cables, start the car with the live battery to provide a reliable voltage to the dead car. Revving the engine can speed up the charging process.
105
Share

How to turn off the Honda CRUISE MAIN light?

To turn off the Honda CRUISE MAIN light, simply press the cruise control switch. CRUISE MAIN refers to the vehicle's cruise control system. The function of cruise control is to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. Honda is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange and the New York Stock Exchange. Its product line mainly consists of four major businesses: automobiles, motorcycles, power products, and aircraft. The automobile business is composed of the core brand Honda and the luxury brand Acura.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.