What does the cruise control system mean?

Is Wheel Balancing Necessary When Rotating Tires?

Wheel balancing is necessary when rotating tires. Here are the detailed explanations: 1. Hazards of not performing wheel balancing when rotating tires: Skipping wheel balancing may cause wheel wobbling and steering wheel vibration during driving. 2. Purpose of rotating car tires: Rotation aims to ensure even wear on all four tires, prolong tire service life, and maintain balanced traction and braking performance. 3. Different tire rotation methods determine whether wheel balancing is needed: When rotating tires, if using same-side front/rear rotation where the tire rolling direction remains unchanged, direct replacement is sufficient; if using cross rotation (left-right swap), the tire rolling direction changes, requiring tire removal from the rim, directional flipping, and reinstallation - in this case, wheel balancing must be performed.

19

5

Share

What are the contents to learn in Subject 3?

Subject 3 involves learning road driving skills. The examination content for road driving skills varies depending on the different types of vehicles eligible for driving. Provincial traffic management departments of public security authorities may, based on local conditions, add examination items for automobile driving licenses and determine examination items for other eligible vehicle types. The road driving skills examination for Subject 3 includes the following contents: 1. Vehicle preparation, simulated lighting test, starting, driving in a straight line, and shifting gears. 2. Changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, and turning right at intersections. 3. Passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving.

17

1

Share

Should You Pull the Handbrake First or Shift to P Gear First?

You should pull the handbrake first before shifting to P gear. Here's the detailed explanation: 1. Pawl gear mechanism: In a car's transmission, both P gear and N gear cut off the power transmission between the input shaft and output shaft. The difference is that P gear has an additional pawl gear mechanism at the end of the output shaft. 2. Function: The pawl is fixed to the transmission housing, while the gear is fixed to the end of the output shaft. When the transmission is shifted to P gear, the pawl presses down and engages with the gear, achieving a locking effect. At this point, both wheels cannot rotate in the same direction simultaneously, preventing the vehicle from moving forward or backward.

17

2

Share

What are the steps to replace the air conditioning filter in an Audi Q5?

Audi Q5 has two air conditioning filters, and the replacement steps are as follows: 1. The external air conditioning filter of the Audi Q5 is located at the top of the engine: Open the engine hood, release the limit buckle at the top of the black support rod, and then pull out the support rod. After removing the hydraulic support rod, pry open the plastic cover below to access the external air conditioning filter, and replace it with a new one. 2. The internal air conditioning filter of the Audi Q5 is located below the glove box: The cover of the air conditioning filter can be found at the bottom of the center console. After unscrewing the screws, remove the cover to see the internal air conditioning filter, then take it out and replace it with a new one.

12

2

Share

How Often Should a Sedan Engine Be Cleaned?

For cleaning the internal lubrication system and carbon deposits of the engine, a deep cleaning is recommended approximately every 50,000 kilometers. 1. Purpose: The purpose of engine cleaning is to remove carbon deposits. If the vehicle has no carbon deposits, cleaning is completely unnecessary. Cleaning once every 40,000 to 50,000 kilometers is sufficient. If there are excessive carbon deposits, cleaning is required (excessive carbon deposits can lead to poor engine ignition, body shaking, etc.). 2. Cleaning Interval: The cleaning interval is related to the usual maintenance of the engine. Generally, frequent oil changes and air filter replacements are recommended. Avoid using low-quality fuel, and engine cleaning may not be necessary. You can check the exhaust port of the muffler; if there is no excessive carbon deposit inside when touched by hand and the fingers do not turn black, it indicates normal engine combustion without carbon deposit issues.

19

2

Share

Can Full-Time 4WD Vehicles Be Towed?

Full-time 4WD vehicles should not be towed for extended periods or at speeds exceeding 20 km/h. 4WD: 4WD refers to a vehicle that maintains four-wheel drive throughout the entire driving process. The engine's output torque is distributed to the front and rear wheels at a fixed ratio. This drive mode ensures excellent off-road and handling performance at all times. However, it cannot adjust torque distribution based on road conditions and has relatively higher fuel consumption. On-Demand 4WD: On-demand 4WD is controlled by a computer chip that switches between two-wheel drive and four-wheel drive. On normal road surfaces, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels.

1

2

Share

What does the cruise control system mean?

Is Wheel Balancing Necessary When Rotating Tires?

What are the contents to learn in Subject 3?

Should You Pull the Handbrake First or Shift to P Gear First?

What are the steps to replace the air conditioning filter in an Audi Q5?

How Often Should a Sedan Engine Be Cleaned?

Can Full-Time 4WD Vehicles Be Towed?

What is the tire pressure for a road bike?

Is an Appointment Required for Maintenance?

What is the Difference Between a Parking Lot and a Parking Area?

Where is the original factory of Dongfeng Honda located?