What does the Baojun 560 engine anti-theft authentication failure mean?

1 Answers
Arianna
07/24/25 7:43pm
Baojun 560 engine anti-theft authentication failure refers to: 1. Key failure; 2. Anti-theft coil failure, control unit failure or communication line problem, unable to recognize the key; 3. The anti-theft control unit is not locked internally; 4. External interference. Taking the 2017 Baojun 560 as an example, its body dimensions are: length 4670mm, width 1810mm, height 1755mm, wheelbase 2750mm. The 2017 Baojun 560 front suspension is a MacPherson independent suspension, the rear suspension is a trapezoidal link type, equipped with a 1.5T turbocharged engine, maximum horsepower 150PS, maximum power 110kW, maximum torque 230Nm, matched with a 6-speed manual transmission.
Was this review help?
4
1
Share
More Forum Discussions

What are the specific steps for recharging car air conditioning refrigerant?

Car air conditioning refrigerant recharge specific steps are: 1. Prepare intact and qualified refrigerant and charging tools; 2. Connect the car air conditioning system to the charging tool adapter; 3. Inject liquid refrigerant from the high-pressure side. Methods to determine whether car air conditioning needs refrigerant recharge: 1. When the air conditioner is running, continuous bubbles appear in the sight glass of the pipeline, indicating low refrigerant level; 2. No bubbles appear whether the air conditioner is running or stopped, indicating excessive refrigerant; 3. No bubbles appear when the air conditioner is running, but briefly appear when stopped, indicating normal refrigerant level; 4. Open the hood and check if there are oil stains at the air conditioning system joints - oil stains indicate refrigerant deficiency.
4
4
Share

What brands are under the Mercedes-Benz company?

Mercedes-Benz company owns the following brands: Mercedes-Benz, Maybach, and Smart. Taking the 2011 Maybach 62s as an example, it belongs to the full-size luxury car category with body dimensions of: length 6171mm, width 1980mm, height 1573mm, and a wheelbase of 3827mm. The 2011 Maybach 62s is equipped with a 6.0T twin-turbocharged engine, delivering a maximum horsepower of 630ps, maximum power of 463kw, with peak power output between 4800 to 5100rpm, paired with a 5-speed automatic transmission, and features mechanical hydraulic power steering.
14
2
Share

What is the standard tire pressure for passenger cars?

The tire pressure for passenger cars is as follows: 1. Normal conditions: The tire pressure for passenger cars is generally between 2.2 and 2.5 kPa under normal circumstances. 2. In spring: In spring, when the temperature is around 20 degrees Celsius, the tire pressure is usually maintained at 2.3-2.5 kPa. However, as the temperature and road surface temperature gradually rise, the tire pressure can easily increase during high-speed or long-distance driving, which may lead to tire blowouts. 3. In summer: In summer, the road surface temperature can reach 60-70 degrees Celsius. If the tire pressure is too high while driving, even a slight impact on a weak spot of the tire can easily cause a blowout. Information about tire pressure is as follows: 1. Tire pressure: Strictly speaking, it refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and its damage will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and its level plays a crucial role in the performance and power of the car. 2. Air pressure: Air pressure is the lifeline of the tire. Both too high and too low pressure will shorten the tire's lifespan. Too low pressure will increase tire deformation, easily causing cracks on the sidewalls and generating flexing motion, leading to excessive heat, rubber aging, fatigue of the cord ply, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. Too high pressure will cause excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the car during driving. In case of impact, it may cause internal cracks and blowouts. Additionally, excessive pressure accelerates tread wear and reduces puncture resistance.
13
2
Share

What is the principle of steering wheel controlling the wheels?

The steering wheel is connected to the steering shaft via splines. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The steering shaft controls the rotation of the front wheels. Whether the car is moving forward or reversing, the steering wheel controls the rotation of the front wheels through the rotating shaft, meaning it adjusts the direction of the car's front. Brief introduction: Below the steering wheel are sequentially connected the steering shaft, steering transmission shaft, steering gear, steering rocker arm, steering tie rod, steering knuckle arm, and steering tie rod. After turning the steering wheel, it drives the rotation of the steering shaft and steering transmission shaft, and this torque is input into the steering gear. Extended information: If the rear of the car needs to move to the right rear, turn the steering wheel to the right; conversely, if the rear of the car needs to move to the left rear, turn the steering wheel to the left.
20
2
Share

Can a Driver's License Be Used for a Loan?

No, it cannot be used for a loan. Here are the relevant details: Reason: A motor vehicle driver's license is not a valid document approved by banks for loan purposes. It only serves as proof that the holder has the legal qualification to drive, functioning as a permit for operating vehicles. Motor Vehicle Driver's License: Also known as a driving license, it is a document applied for by drivers in accordance with relevant laws. As a valid legal proof for driving vehicles, it must be carried when operating a motor vehicle; driving without it is prohibited. The use of a motor vehicle driver's license must comply with the specific vehicle types it authorizes; otherwise, it constitutes a violation of the law.
14
5
Share

What does the car mute button mean?

The car mute button is a mute button used to control the mute mode of multimedia. When answering a call or playing music, pressing the mute button will mute the sound. The buttons in the car are divided into: 1. Fuel tank opening button: remotely opens the fuel tank cover inside the car; 2. ESP button: used to turn the vehicle's ESP function on or off; 3. Reverse radar button: allows the owner to turn the vehicle's reverse radar system on or off as needed; 4. Central lock button: is the control button for the vehicle's central door lock; 5. Headlight cleaning button: controls the automatic cleaning function of the headlights; 6. Rear sunshade button: controls the opening and closing of the electric rear sunshade inside the car.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.