···
Log in / Register

How to Turn Off the Navigation on the Tiguan L Dashboard?

6Answers
VanDylan
07/29/2025, 08:05:17 PM

Tiguan L navigation can be turned off by disabling the traffic alerts in the navigation settings. You can refer to the owner's manual for instructions or contact the manufacturer or 4S store customer service for assistance. Here is some related information about the Tiguan: 1. Body Dimensions: The body length, width, and height are 4506mm, 1809mm, and 1685mm respectively, with a wheelbase of 2684mm. 2. Powertrain: The Tiguan L is equipped with a 2.0TSI high-power engine, delivering a maximum power of 162 kW and a peak torque of 350 Nm. It is paired with a 7-speed wet dual-clutch transmission.

Was this review help?
117
Share
DelCarson
08/15/2025, 11:56:57 PM

I remember when I used to drive the Tiguan L, the navigation was always displayed on the dashboard, which sometimes felt distracting, especially when driving in the city. Later, I figured out that I could use the multifunction buttons on the right side of the steering wheel to operate it: first press the right scroll wheel, navigate to the navigation icon, then briefly press the confirm button to select 'Exit' or 'End Navigation.' The system automatically returns to the home screen during the process. This method is quite intuitive and takes only about ten seconds to complete. I think turning it off when not in use makes the dashboard cleaner, helps with focus while driving, and even saves a bit of battery. If it occasionally malfunctions—like not responding when pressed—it might be due to system lag or the infotainment needing a reboot, but there’s no need to panic; just try restarting the engine to restore it.

Was this review help?
5
Share
Expand All
Valerie
10/19/2025, 01:50:51 AM

I find the dashboard navigation system of the Tiguan L to be quite user-friendly, with the shutdown operation mainly completed on the right side of the steering wheel. Specifically, you hold the steering wheel, use your right thumb to control the scroll wheel, scroll right to the navigation function area, then briefly press the confirmation button. After the options appear, select 'Stop Navigation' to end it. The whole process doesn't require looking at the central control screen, minimizing the need to shift your gaze. This method is common across most Volkswagen models. Having driven such cars for over a decade, I find it quite handy. The key is to regularly update the car's software to avoid bugs in older versions that might cause the navigation to freeze and become unresponsive. I recommend checking the system status during maintenance to prevent future headaches.

Was this review help?
11
Share
Expand All
MalachiFitz
12/02/2025, 01:25:41 AM

As a daily driving enthusiast, I find it quite intuitive to turn off the dashboard navigation on the Tiguan L. The basic steps involve using the buttons on the right side of the steering wheel: scroll to the navigation icon, press confirm, and select the exit option. There are several benefits to doing this, such as avoiding unnecessary information that can distract your view, especially during nighttime highway driving for enhanced safety. I once encountered a situation where the navigation display suddenly took over the entire screen, obstructing the speedometer. Quickly turning it off made driving feel much more secure. Remember, this feature comes as standard and doesn’t require any additional setup. If you don’t succeed on your first try, practice a few more times—don’t get discouraged.

Was this review help?
20
Share
Expand All
TessaRose
01/22/2026, 02:49:20 AM

Let me share my personal experience on disabling the dashboard navigation in the Tiguan L: If the navigation automatically displays after starting the vehicle, simply use the right control button on the steering wheel—scroll to the navigation icon, press the center button to enter the menu, and select the 'Exit Navigation' option. The whole process takes just a second or two, and the dashboard will revert to the default information display. I find this method particularly practical as it reduces the risk of driving distractions, especially during traffic jams when you don't need to frequently glance up at the central control screen. You can also customize a shortcut to disable it in personal mode, but I prefer the direct button operation for its simplicity and convenience.

Was this review help?
9
Share
Expand All
VeraDella
04/18/2026, 02:41:24 AM

In my experience driving the Tiguan L, turning off the dashboard navigation is a handy trick. Simply use the scroll wheel button on the right side of the steering wheel to navigate to the navigation function area, then press confirm to select 'Off' - perfect for quick handling. This design is very user-friendly for beginners too. I recommend familiarizing yourself with the button positions first before practicing the operation to avoid distracted searching while driving. After turning it off, the dashboard layout becomes cleaner, allowing better focus on other information like fuel consumption or speedometer. I find such thoughtful electronic systems make driving easier and safer. Occasionally if the navigation won't turn off, it might be a system upgrade issue - just restart and don't worry.

Was this review help?
20
Share
Expand All
More Q&A

What is the tire size of the Subaru Outback?

Subaru Outback offers two types of tires: YOKOHAMA's GEOLANDAR tires and Bridgestone's DUELER series tires. The former has a specification of 225/65R17, paired with 17-inch rims, while the latter has a specification of 225/60R18, paired with 18-inch rims. The Subaru Outback is the new flagship model of Subaru, with body dimensions of 4775mm in length, 1820mm in width, and 1615mm in height. It has a wheelbase of 2745mm, front track of 1535mm, rear track of 1535mm, and a ground clearance of 213mm.
117
Share

Why is the idle speed of a natural gas vehicle unstable?

Natural gas combustion is not uniform enough, the idle air orifice is blocked, the idle device is not working properly, the spark of individual cylinder spark plugs is too weak, the sealing of individual valves is not tight, the intake manifold is leaking, the ignition timing is too early or too late, the idle speed adjustment is improper, etc. Solution: Adjust the idle speed. If the fault still cannot be eliminated after adjusting the idle speed, check whether the idle orifice and idle air orifice are blocked. If the orifice is blocked, clean it with gasoline or acetone and blow it through with compressed air. If the orifice is not blocked, stabilize the engine speed at a certain speed and listen for air leakage at the intake manifold or the middle and lower gasket of the carburetor. If there is air leakage, it can be eliminated by tightening screws or adding/subtracting gaskets. If the idle speed is unstable and accompanied by a decrease in engine power, further check the working condition of the spark plugs, the sealing performance of the valves, and whether the ignition timing is correct. If necessary, perform maintenance and adjustment.
111
Share

How to request vehicle relocation service for out-of-town vehicles?

For relocating out-of-town vehicles, you can call the 114 hotline or the 122 traffic accident alarm service number. When calling the 114 exclusive hotline, you need to provide the color, license plate number, and model information of the other party's vehicle. Subsequently, 114 will notify the vehicle owner to move their car via phone call or text message. You can also dial 122, which is the national public security traffic management authority's number for receiving public traffic accident reports. After calling, you only need to provide the license plate number to contact the vehicle owner. More relevant information is as follows: Insurance logo: Check the insurance logo on the vehicle's front windshield, which will display the insurance company of the vehicle. You can call the contact number of this company to have the insurance company notify the owner. Nowadays, many vehicle owners also place their contact numbers on the front of their cars.
106
Share

How to Use the M+ and M- Gears in an Automatic Transmission Car?

Automatic transmission car M+ and M- gears usage method: push the gear lever in the M+ direction once to upshift the vehicle by one gear, push the gear lever in the M- direction once to downshift the vehicle by one gear. The M+ and M- gears in an automatic transmission refer to the manual mode of the gearbox. In manual mode, the driver can manually upshift or downshift, unlike manual transmission cars where the vehicle won't automatically shift gears. The vehicle can switch to manual mode at any time without restrictions like speed or RPM. The transmission will automatically match the appropriate gear based on real-time vehicle speed. Manual mode is typically used in situations like uphill, downhill, or traffic congestion. In manual mode, the driver can downshift to utilize engine braking for assisted deceleration, combined with brake force for enhanced safety.
120
Share

What are the reasons for not being able to schedule the Subject 4 exam?

The reasons for not being able to schedule the Subject 4 exam: First, the number of people scheduling is too large, leading to lower priority due to queuing; second, system issues, where excessive load pressure may also result in some students being unable to schedule. Below are the specific details about Subject 4: 1. Concept: Subject 4 is an additional safety and common sense test following the Subject 3 road test. 2. Exam content: The test paper consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. The main exam content of Subject 4 includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
118
Share

Where is the light switch located in Subject Three?

Subject Three's light switch is mostly located below the steering wheel. The precautions for the Subject Three light test are as follows: 1. Stay focused: During the test, concentrate to avoid missing or mishearing instructions. 2. Voice prompts: The voice prompts include passing under an arch bridge or a crosswalk at night; passing a sharp curve or slope at night; and passing an intersection without traffic lights at night. In these three situations, you should alternately use the high and low beams (changing the light more than twice). 3. Quick operation: During the test, light usage is prompted by voice, and the operation must be completed within 5 seconds after the prompt ends. Do not act too slowly, but also do not act before the prompt is finished.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.