What does 'Refer to the owner's manual for coolant refill' mean?

How Many Kilometers Should a New Car Drive Before Carbon Deposit Cleaning?

Carbon deposits in cars are generally cleaned every 10,000 kilometers. The following are the impacts of not cleaning the engine for a long time: 1. Increased fuel consumption: A large amount of sludge will adhere to the cylinder wall, directly hindering the smooth movement of the piston. The high temperature in the engine cannot be dissipated through oil circulation, leading to a decrease in engine power and a sharp increase in fuel consumption. 2. Engine damage: Due to the presence of sludge, the lubrication effect is reduced. Sludge is difficult to dilute with oil, and the movement of the cylinder will exacerbate mechanical friction, increasing the load on the crankshaft and causing serious damage to the engine. 3. Oil deterioration: If sludge is not cleaned for a long time, it will accumulate more and more. After noticing a decrease in engine power, even replacing the oil will not solve the problem of space compression, and it will cause the new oil to deteriorate.

103

Share

What are the symptoms of a faulty diesel pickup truck injector?

Diesel pickup truck injector damage is prominently manifested by black smoke from the engine. Here are additional details: 1. Function of the injector: The injector is a crucial component of a diesel internal combustion engine. The degree of injector atomization determines fuel consumption and the engine's power output. Good injector atomization ensures that the vehicle's fuel is fully converted into kinetic energy, maximizing power output. 2. Injector damage: If the injector is damaged or severely worn, the vehicle will exhibit noticeably reduced power, black smoke from the exhaust pipe, increased engine noise, and a distinct "tick, tick, tick" sound from the engine. When these symptoms appear, it can generally be concluded that the injector is faulty.

115

Share

What lights should be used when driving straight through an intersection at night?

When driving straight through an intersection at night, vehicles should alternately use high and low beams to signal. When passing through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic signal control at night, drivers should also alternately use high and low beams to signal. When approaching sections with limited visibility such as sharp curves or the top of slopes, or when overtaking or encountering emergencies, motor vehicles should slow down and sound the horn as a warning. When passing through intersections controlled by traffic signals, motor vehicles should adhere to the following rules: 1. At intersections marked with guide lanes, enter the guide lane in the required direction; 2. When preparing to enter a roundabout, yield to vehicles already in the intersection; 3. When turning left, turn left from the center of the intersection. Turn on the turn signal when turning and use low beams when driving at night; 4. When the signal permits, proceed in order; 5. When the stop signal is given, stop in order before the stop line. If there is no stop line, stop outside the intersection; 6. When turning right and there is a vehicle waiting for the signal in the same lane ahead, stop and wait; 7. At intersections without directional signal lights, turning vehicles must yield to straight-moving vehicles and pedestrians. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.

117

Share

Why does the car beep intermittently?

Why does the car beep intermittently? Common reasons are as follows: 1. The door is not properly closed: While the car is moving, if a door is not properly closed, the car will emit a beeping sound as a reminder, and the dashboard will indicate which side's door is not closed. 2. Insufficient tire pressure: The car has electronic components to monitor the tires. If a tire is leaking and the pressure is insufficient, it will send a signal to the alarm system. 3. Overheating coolant: The coolant temperature warning system only shows the temperature, not the water level. An alarm from this system indicates that the engine system is low on water. 4. Insufficient engine oil: Low engine oil levels can affect the operation between car components. Without proper lubrication, wear and tear will increase, potentially leading to damage. If the oil pressure is insufficient, the alarm system will alert the driver.

117

Share

Can You Cross the Dotted Line During Parallel Parking?

Parallel parking should not involve crossing the dotted line. Here are some additional details: 1. Key points for parallel parking: The parking space boundaries are now marked solely by ground lines instead of poles. For those obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. Drive the vehicle parallel to the parking space, then reverse into the space without any pauses. As long as the vehicle is parked within the boundary lines, it is considered a pass. 2. Grading criteria: If the vehicle body crosses the line after stopping, 100 points are deducted. If the wheels touch the lane boundary lines during movement, 10 points are deducted. Failure to park within the space results in a 100-point deduction. Not using the left turn signal when starting incurs a 10-point deduction. Pausing during the maneuver leads to a 100-point deduction. The new regulation's challenge: No poles for reference and no pauses allowed.

110

Share

What does the SVS light in a diesel vehicle mean?

Diesel vehicle SVS light is an engine fault indicator light. Here is the extended information: 1. Diesel vehicle SVS light: After starting the engine, when the engine ECU detects a fault in the engine, the SVS light will illuminate, indicating that there is a fault in the vehicle's engine. For such engine faults, it is recommended to seek professional mechanics for handling and inspection, first checking whether it is a sensor or wiring fault. If it is an engine fault, it should be addressed promptly. 2. Solution for diesel engine SVS light illumination: You can try to start the engine. If it cannot start, it may be due to an abnormal fuel pump, which needs to be replaced. If it can still start, it could be a fault with other sensors. In this case, the vehicle can still be driven, but the fault may affect the normal use of the vehicle, so it is recommended to go to a repair shop for inspection as soon as possible.

112

Share

What does 'Refer to the owner's manual for coolant refill' mean?

How Many Kilometers Should a New Car Drive Before Carbon Deposit Cleaning?

What are the symptoms of a faulty diesel pickup truck injector?

What lights should be used when driving straight through an intersection at night?

Why does the car beep intermittently?

Can You Cross the Dotted Line During Parallel Parking?

What does the SVS light in a diesel vehicle mean?

Is There a Difference Between Buying a Car in Another Province and Buying Locally?

How Long Does Door Panel Metal Repair Usually Take?

What is the L15BU engine?

How long does it take to get a replacement driver's license?