BSM is the Blind Spot Monitoring system of motor vehicles. Introduction to BSM: The full English name of BSM is Blind-Spot-Monitoring, which is an auxiliary safety system for motor vehicles. When the system is activated, it displays on the vehicle's rearview mirror when other vehicles overtake from the left or right side of the motor vehicle. Working Principle: The blind spot monitoring system used in motor vehicles, also known as the lane change assist system, is a very good safety technology configuration for motor vehicles. It mainly monitors rear vehicles through broadcast radar and provides effective reminders. It is installed at the rear bumper of the vehicle. When the motor vehicle's speed exceeds 10 kilometers per hour, it automatically activates to monitor vehicles within a range of 3 to 8 meters on the left and right rear sides of the vehicle.

What does BSM mean?

What are the differences between Toyota Prado and Land Cruiser?

Toyota Prado and Land Cruiser differ in the following aspects: 1. Different body dimensions: The Toyota Prado measures 4780mm in length, 1885mm in width, and 1880mm in height; while the Land Cruiser measures 5170mm in length, 1975mm in width, and 1930mm in height. 2. Different engines: The Toyota Prado is equipped with a 3.5L naturally aspirated engine; whereas the Land Cruiser comes with a 4.0L naturally aspirated engine. 3. Different suspensions: The Toyota Prado features a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension; the Land Cruiser has a coil-spring double-wishbone independent front suspension and a four-link non-independent rear suspension.

111

Share

What are the differences between the Mercedes-Benz C180 and C200?

Mercedes-Benz C180 and C200 have the following differences: The engines used in the C180 and C200 are different. The C180 is equipped with a 1.6-liter turbocharged engine, while the C200 uses a 1.5-liter turbocharged engine. The 1.6-liter turbocharged engine in the C180 delivers 156 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5,300 rpm and its maximum torque between 1,200 and 4,000 rpm. It features direct fuel injection technology and an aluminum alloy cylinder head and block. The engine is paired with a 9-speed automatic transmission (9AT). The 1.5-liter turbocharged engine in the C200 produces 170 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power at 5,800 rpm and its maximum torque between 1,800 and 4,000 rpm. It also features direct fuel injection technology and an aluminum alloy cylinder head and block. The engine is paired with a 9-speed automatic transmission (9AT). Body dimensions: The C180 measures 4,784 mm in length, 1,810 mm in width, and 1,457 mm in height, while the C200 measures 4,882 mm in length, 1,820 mm in width, and 1,456 mm in height. Top speed and 0-100 km/h acceleration: The C180 has a top speed of 221 km/h, while the C200 reaches 225 km/h. The C180 accelerates from 0 to 100 km/h in 9.1 seconds, whereas the C200 does it in 9 seconds. Currently, the C180 has been discontinued, and Mercedes-Benz no longer uses the 1.6-liter turbocharged engine in the C-Class.

120

Share

How long does it take to receive a notification for driver's license points deduction?

Generally, you will receive a traffic violation SMS notification within 3 to 7 days after a vehicle violation. Here are the details: According to traffic regulations, after a motor vehicle violation, the violation can usually be queried online or a SMS notification received within 3 to 7 days, with a maximum delay of no more than 13 working days. Here is some additional information: Violation handling methods: If you are caught on the spot by traffic police and sign the confirmation: The vehicle owner needs to go to the local traffic police station to handle the violation within 15 days of the violation. If it is not handled within 15 days, a late fee of 3% per day will be charged, but the late fee will not exceed double the original fine amount. If the violation is captured by electronic monitoring cameras: The vehicle owner can check the violation record on the traffic website and then go to the traffic police station where the violation occurred to handle it within one month before the annual vehicle inspection. There is no need to handle it within 15 days.

119

Share

Will Water in Gasoline Affect the Engine?

Water in gasoline can indeed affect the engine. Never add water to gasoline, as it can easily lead to engine cylinder failure. Below is additional information: Reasons: Gasoline can combust when atomized, but water cannot. The direct consequence of mixing water with gasoline is boiling inside the cylinder, causing engine knocking. In severe cases, it can result in piston misalignment. This can lead to issues like oil burning and cylinder scoring, causing a sudden increase in compression ratio and even crushing the piston ring lands. Density Differences: Gasoline and water have different densities, with gasoline floating on top of water. This reduces the engine's efficiency, leading to higher fuel consumption. Moreover, water at high temperatures can damage the engine's combustion chamber and accelerate transmission wear. Disrupting the Power System: Gasoline-powered vehicles rely on burning gasoline to drive the engine and move the car. If water accidentally mixes with the gasoline, it essentially disrupts the vehicle's power system at its source. Naturally, the car will experience poor acceleration. The spark plug may struggle to ignite the fuel properly, making it difficult to start the car or even rendering it unable to start.

113

Share

How to deal with the failure to start a Haval H6?

If your Haval H6 fails to start, it is recommended to check the battery and electrical circuits. When troubleshooting, the first step is to read the fault codes. The reasons why a Haval H6 may not start are as follows: 1. The fuel is exhausted, and the fuel gauge shows below the red line, naturally making it impossible to start. 2. The battery is dead, possibly due to reasons such as leaving the headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, DVD players, etc., can also cause vehicle circuit failures. 3. Incorrect gear position. When starting an automatic transmission vehicle, the gear must be in the P or N position. If it is in the R or D position, the vehicle will not start.

102

Share

What Causes a Manual Transmission Car to Fail Engaging Reverse Gear?

Manual transmission cars may fail to engage reverse gear because the clutch pedal is not fully depressed, or the gear teeth happen to align. Details are as follows: Clutch pedal not fully depressed: When shifting gears in a manual transmission car, the clutch pedal must be fully depressed to engage the gear. Simply pressing the clutch pedal deeper will resolve this issue. Gear teeth alignment: If the teeth of two gears happen to align perfectly, reverse gear cannot be engaged. In this case, shift into a forward gear to rotate the gears slightly, then attempt to engage reverse gear again.

113

Share